Chief KTP-Series - Manual
Chief KTP-Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation Instructions; TOOLS REQUIRED FOR INSTALLATION; Phillips Head Screw Driver; PARTS; QUANTITY By MODEL
- Page 3 – ASSEMBLY AND INSTALLATION; Mount Assembly; Figure 2: Assemble Pole to Base
- Page 4 – Figure 5: Assemble Array Rail to Pole; Display Installation; Attach Centris Head to Flush Mount Display
- Page 6 – ADJUSTMENTS; Display Adjustment; Display Horizontal Position Adjustment; CABLE MANAGEMENT; Figure 16: Cable Management
Chief Manufacturing, a products division of
Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
P: 800.582.6480 / 952.894.6280
I N S T A L L A T I O N I N S T R U C T I O N S
8832-000142 Rev I
2008 Milestone AV Technologies,
a Duchossois Group Company
11/08
BEFORE YOU BEGIN
Horizontal And Vertical Table Stands
and Accessories
Model: KTP-Series
The KTP-Series is a free standing, pole mount solution for multiple displays.
KTP-440 / KTP-445
KTP-230
KTP-320
KTP-220 / KTP-225
CAUTION!
To prevent damage to the Kit, which could affect or void the Factory warranty, and to the equipment that will be
attached to it, thoroughly study all instructions and illustrations before you begin the installation.
•
If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480.
Chief® and Centris™ are trademarks of Milestone AV Technologies. All rights reserved.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Model: KTP-Series Installation Instructions 2 TOOLS REQUIRED FOR INSTALLATION • Phillips Head Screw Driver • 3/4" Wrench • 3/32" Hex Key (provided) • 5/32" Hex Key (provided) • 7/32" Hex Key (provided) PARTS Carefully inspect components for shipping damage . Ifdamage is apparent, cal...
Installation Instructions Model: KTP-Series 3 ASSEMBLY AND INSTALLATION Mount Assembly KTP-230 Assembly To assemble the KTP-230: 1. Assemble pole (60) to base (40) using one 3/8-16 x 1"FHCS (90). (see Figure 2) Figure 2: Assemble Pole to Base 2. Place front pole clamp, with Centris Head, (210)ag...
Model: KTP-Series Installation Instructions 4 NOTE: Equally tighten screws (230) against front pole mount (210) and rear (220) pole clamps.(see Figure 4) Figure 4: 4. Secure rear pole clamp (220) to front pole mount(210) and pole by tightening three BHCS (230) using5/32" hex key (120). (see Figu...
