Chief FSR Series - Manual
Chief FSR Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation Instructions; IMPORTANT WARNINGS AND CAUTIONS!; corresponding instructions.; DIMENSIONS
- Page 3 – TOOLS REQUIRED FOR INSTALLATION; Drill; PARTS
- Page 4 – INSTALLATION; INSTALL MOUNT TO SINGLE WOOD STUD; Figure 2: Installation to Single Wood Stud; INSTALL MOUNT TO DRYWALL; Figure 3: Drywall Anchor
- Page 5 – Figure 4: Installation to Drywall; INSTALL DISPLAY TO MOUNT; Figure 5: Open Latching Flag; REMOVE DISPLAY FROM MOUNT
I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480
952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
8804-000290
©
2006 Chief Manufacturing
www.chiefmfg.com
01/06
BEFORE YOU BEGIN
SMALL FLAT PANEL STATIC WALL MOUNT
Model: FSR Series
Specifications:
•
Designed for installation on single wood studs or
drywall (1/2" minimum thickness); either option
provides ±1/2" lateral shift.
•
Weight capacity of 45 lbs (20 kg) for wood stud or
drywall installation.
WARNING:
It is the installer’s responsibility to make sure all components are properly assembled and installed using
the instructions provided. Failure to read, thoroughly understand, and follow all instructions can result in serious
personal injury, damage to equipment, or voiding of factory warranty.
•
If you have any questions about this these instructions or your specific installation, contact Chief Manufacturing
at 1-800-582-6480 or 952-894-6280.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Model: FSR Series Installation Instructions 2 IMPORTANT WARNINGS AND CAUTIONS! WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follo...
Installation Instructions Model: FSR Series 3 TOOLS REQUIRED FOR INSTALLATION • Drill • 1/8" drill bit (wood stud installation) • 3/8" drill bit (drywall installation) • Hammer (drywall installation) • Phillips screwdriver, #2 NOTE: Other tools may be required depending on your method of ins...
Model: FSR Series Installation Instructions 4 INSTALLATION The FSR may be installed on either a single wood stud, or drywall (1/2" minimum thickness). INSTALL MOUNT TO SINGLE WOOD STUD 1. Determine approximate mounting location, keeping in mind the display size. 2. Use a stud sensor to locate ap...
