Chief CTA-2536 - Manual
Chief CTA-2536 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT WARNINGS AND CAUTIONS!; PARTS
- Page 3 – CONTENTS; Table 1. Shipping Contents
- Page 4 – WARNING; STEP 2; Installing the Wall Plate; Figure 2. Install the Wall Plate
- Page 5 – STEP 3; Attaching Wall Arm to Wall Plate; NOTES; Connecting NPT Pipe or Nipple to Wall Arm; Figure 3. Attach Wall Arm to Wall Plate
I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
8809-000028 (Rev. A)
1-800-582-6480
952-894-6280 FAX 952-894-6918
2004 Chief Manufacturing
8401 EAGLE CREEK PARKWAY, STE. 700
www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA
11/04
CTA-2536
Internal Dual Stud Wall Plate
BEFORE YOU BEGIN
•
CAUTION: To prevent damage to your equipment, which could affect or void the Factory warranty,
thoroughly study all instructions and illustrations before you begin to install the CTA-2536. Pay particular
attention to the Warnings and Cautions in this document.
•
If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480.
The CTA-2536 Dual Stud Wall Plate provides a
mounting solution for the following wall arms:
•
CTA-025 Single Stud Wall Arm
•
WMA-300 Wall Mount Arm
The CTA-2536 has a maximum weight capacity of
150 lbs. (68.0 kg).
CTA-2536 Internal Dual Stud Wall Plate
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installation Instructions CTA-2536 2 IMPORTANT WARNINGS AND CAUTIONS! WARNING A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corre...
Installation Instructions CTA-2536 3 CONTENTS PARTS .............................................................................. 2 INSPECT THE UNIT BEFORE INSTALLING .............. 3 TOOLS REQUIRED FOR INSTALLATION .................. 3 INSTRUCTIONS ....................................................
Installation Instructions CTA-2536 4 INSTRUCTIONS STEP 1 Determine a Suitable Mounting Location NOTE: The wall plate (10) must be mounted to wood studs that are 16” apart on center. See Figure 2. 1. Locate the wall plate (10), six lag bolts (20) and six flat washers (30). WARNING It is the installer...
