Chief CMA-366 - Manual
Chief CMA-366 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
CHIEF MANUFACTURING INC.
8803-000024
1-800-582-6480
952-894-6280 FAX 952-894-6918
2003 Chief Manufacturing
12800 HIGHWAY 13 SOUTH, SUITE 500
www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA
06/03
I N S T A L L A T I O N I N S T R U C T I O N S
TRUSS SPANNING ADAPTER
CMA-366
The bracket is a universal method for quick, easy installation of NPT 1½” pipe to or above a variety of
structures. By using any length of standard NPT 1½” pipe threaded both ends, you can extend the height
capabilities to meet your needs.
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY!
When mounting Chief Manufacturing accessories, the structural system and mounting method
MUST
be capable of supporting 5 times the combined weight of the total installation.
The maximum weight to be installed on the truss spanning adapter is 250 pounds (113.4Kg).
Unpack and check contents:
(1) PLATE, truss hang down
(4) NUT, Nylock 3/8-16
(1) PLATE, ceiling, 4” X 4”
(12) WASHER, flat, 3/8”
(2) CLAMP, U, 2”pipe
(1) SETSCREW, 10-24 X ¼”
(4) BOLT, hex, 3/8-16 x 1” (1)
WRENCH,
Allen,
3/32”
(4) BOLT, hex, 3/8-16 x 2”
1. Secure the hang down truss plate to a structural member (see Figure 1) in the desired location using two
clamps, four 3/8-16 X 2” bolts, and four 3/8” flat washers
(SEE WARNING ABOVE)
.
2. Secure the ceiling plate to the truss in the desired location using four 3/8-16 X 1” bolts, four 3/8-16
Nylock nuts, and four 3/8” flat washers.
3. Install NPT 1½” pipe and secure using 10-24 X ¼” setscrew.
Figure 1. CMA-366
Setscrew Location
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
