Chief CMA-106 - Manual
Chief CMA-106 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
CHIEF MANUFACTURING INC.
8803-000056 (Rev. C)
1-800-582-6480
952-894-6280 FAX 952-894-6918
2004 Chief Manufacturing
8401 EAGLE CREEK PARKWAY, STE. 700
www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA
01/05
I N S T A L L A T I O N I N S T R U C T I O N S
JUNCTION BOX ASSEMBLY CEILING PLATE
CMA-106
The Ceiling Plates are designed for ease of installation with any height of ceiling. By using any length of
standard NPT 1½” pipe threaded both ends, you can extend the height capabilities to meet your needs.
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY!
When mounting Chief Manufacturing accessories, the structural system and mounting method
MUST
be capable of supporting 5 times the combined weight of the total installation.
The maximum weight to be installed on the ceiling plate is 50 pounds (22.7 Kg).
Unpack and check contents:
(1) Ceiling
Plate
(2) #10
Fender
Washer
(2) #10-32 Socket Screw
(2) #10 Lock Washer
(1) 1/8” Hex Key
(1) #10-24 x 1/4” Socket Screw
(1) 3/32” Hex Key
1. Securely install the Junction Box Assembly, per manufacturer instruction.
(SEE WARNING ABOVE)
.
2. Using the #10-32 screws, fender washers, lock washers and hex key provided, install ceiling plate (SEE
DIAGRAM BELOW).
3.
Install 1 ½” NPT into fitting and secure using #10-24 x 1/4” set screw.
4.
Follow the Ceiling Mount Instructions for mating components or mounts
#10-32 Socket Screw
Lock Washer
Fender Washer
ceiling plate
Not Included
10-24 x ¼” Setscrew
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
