Chief CM8 - Manual - manualsarea.com

Page 2 - Installation Instructions; DISCLAIMER

Installation Instructions 2 DISCLAIMER Milestone AV Technologies, and its affiliated corporations andsubsidiaries (collectively, "Milestone"), intend to make thismanual accurate and complete. However, Milestone makes noclaim that the information contained herein covers all details,conditions...

Page 3 - LEGEND

Installation Instructions 3 LEGEND Tighten Fastener Apretar elemento de fijación Stram fastspændingsbeslag Befestigungsteil festziehen Skruva åt fäste Apertar fixador Kiristä kiinnike Serrare il fissaggio Dokr ci element mocuj cy Bevestiging vastdraaien Serrez les fixations Ba lant S n Rögzít meghúz...

Page 4 - TOOLS REQUIRED FOR INSTALLATION

Installation Instructions 4 TOOLS REQUIRED FOR INSTALLATION PARTS #2 3/16" (5mm)1/2" (12.5mm) - masonry A (1) B (1) C (1) D (1) E (1) F (1) G (1) H (1) G1 (8) M4x16mm G2 (6) M4x20mm G3 (6) M4x25mm G4 (6) M5x16mm G5 (6) M5x20mm G6 (6) M5x25mm G7 (6) M6x16mm G8 (6) M6x25mm G10 (6) M8x20mm G11 ...

Page 5 - DIMENSIONS

Page 6 - INSTALLATION; IMPROPER INSTALLATION CAN LEAD TO; Wood Stud Installation; Mount the wall bracket to at least two wooden studs

Installation Instructions 6 1a 3 x INSTALLATION WARNING: IMPROPER INSTALLATION CAN LEAD TO MOUNT FALLING CAUSING SEVERE PERSONAL INJURYOR DAMAGE TO EQUIPMENT! It is the installersresponsibility to make certain the structure to which themount is being attached is capable of supporting five timesthe w...

Page 7 - Concrete Installation; Mount the wall bracket in four spots, spaced a

Installation Instructions 7 1b 2 Concrete Installation NOTE: Mount the wall bracket in four spots, spaced a minimum horizontal distance of 12" (30.5cm). 1. Level wall bracket (B) and mark locations of pilot holes. 2. Drill four 1/2" x 2-1/2" (12.5mm x 63.5mm) pilot holes intomounting sur...

Page 8 - Attaching Brackets to Display

Installation Instructions 8 2 Attaching Brackets to Display WARNING: IMPROPER INSTALLATION CAN LEAD TO MOUNT FALLING CAUSING SERIOUS PERSONALINJURY OR DAMAGE TO EQUIPMENT! DO NOT substitutehardware. Only use hardware provided or specified bymanufacturer. NOTE: Locate Digital Optical Audio Output on ...

Page 9 - Installing Display

Installation Instructions 9 3 Installing Display WARNING: IMPROPER INSTALLATION CAN LEAD TO DISPLAY FALLING CAUSING SERIOUS PERSONAL INJURYOR DAMAGE TO EQUIPMENT! Ensure mounting brackethooks are completely engaged over wall bracket. CAUTION: DISPLAY MAY WEIGH IN EXCESS OF 40 LBS! Always use two peo...

Page 10 - Connecting Electrical Components; DAMAGE TO CABLES POSSIBLE! Do not run

Installation Instructions 10 4 Connecting Electrical Components Electrical Rating: DC 12V; 0.4A CAUTION: DAMAGE TO CABLES POSSIBLE! Do not run cables or wires near the moving parts of this mount. 1. Plug the AC adapter (E) into the CM8 control box and thehome’s electrical socket. 2. Plug the IR rece...

Page 11 - Adjusting Tilt; The CM8 is designed to tilt the display down a

Installation Instructions 11 5 AUTO MANU RESET STOP Adjusting Tilt NOTE: Remove plastic tab from remote control (J) before use. 1. Use the down arrow button on the remote control (J) to fullytilt down the display. NOTE: The CM8 is designed to tilt the display down a maximum of 13°. The maximum tilt ...

Page 12 - Removing Spring to Tilt Display

Installation Instructions 12 6 3 Removing Spring to Tilt Display 1. Remove and keep two Phillips screws from plastic cover onnon-motorized bracket (C). 2. Remove and keep one Phillips screw from latch. 3. Lower latch to remove spring. 4. Return latch to original position. 5. Store spring in plastic ...

Page 13 - Adjusting Upright Position of Display (Optional)

Installation Instructions 13 7 Adjusting Upright Position of Display (Optional) 1. Adjust upright position of display (+/- 2°) by turning the bottomscrew on the motorized bracket (A). 1 (A)

Page 14 - Setting Preset Position

Installation Instructions 14 8 Setting Preset Position 1. Remove pin (C1) from STORE opening. 2. Insert pin into appropriate opening dependent on tilt angledesired: • Insert pin into "P1" for maximum preset tilt angle ofapproximately 6°. • Insert pin into "P2" for maximum preset tilt...

Page 16 - Europe; Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands; Asia Pacific; 008 Milestone AV Technologies

Installation Instructions USA/International A 8401 Eagle Creek Parkway, Savage, MN 55378 P 800.582.6480 / 952.894.6280 F 877.894.6918 / 952.894.6918 Europe A Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands P +31 (0)40 2668620 F +31 (0)40 2668615 Asia Pacific A Room 24F, Block D, Lily YinDu Interna...

Chief CM8 - Manual

Table of Contents:

Summary

Other Chief Models