Carrier Performance Tp Prh A - User Manual

8 ON- SCREEN INDICATORS 20 21 l 23 19 18 25 24 22 17 6 7 8 9 10 11 12 13 14 15 16 5 4 3 2 1

9 ON- SCREEN INDICATORS 1. Day of the week2. Programming option; indicates which settings are being adjusted3. Filter, UV lamp, humidifier pad reminders4. Current temperature5. Current program routine – follow scheduled programming, hold current settings, run vacation program 6. Fan mode – on or aut...

10 QUICK START Setting the time and day You must set the time and date before you can use any of the thermostat’sprogramming features. 1. Open the door.2. Press the set button on the left. The screen will show the word clock on the left and the time on the bottom. 3. To set the hour, press the butto...

12 QUICK START Setting or changing the temperatures for heating and cooling Your thermostat is installed with pre - set heating and cooling temperature settings.You can use these or change them so your home is as warm or as cool as you would like it to be. You can also temporarily change the tempera...

14 QUICK START Holding the temperature Here’s how to override your programmed temperature settings and hold thetemperature at a specific setting without the temperature changing during the next programmed period. 1. Open the door.2. Press the schedule button at the top. The arrow will move to the wo...

15 QUICK START Using the ExP – Edge Expansion Port – to program the thermostat Your Edge thermostat has an unique ExP – Edge ExpansionPort – that allows you to use a digital memory card to program the thermostat on your computer. The ExP is sold separately asan accessory. Remove the dual port digita...

16 PROGRAMMING THE THERMOSTAT Determining your programming schedule Unlike many thermostats, this one gives you the option of programming every dayof the week differently. It is pre - programmed at the factory with the same settings for all seven days: Monday through Sunday Time Heat Cool Wake 6 AM ...

21 PROGRAMMING THE THERMOSTAT Setting up your schedule when all days of the week will follow the sameschedule Here’s how to program your thermostat when all seven days of the week will followthe same schedule. 1. Open the door.2. Press the set button on the left repeatedly until the screen shows dai...

22 PROGRAMMING THE THERMOSTAT 5. Set the cooling temperature for that time period by press- ing the button under the cool set at : temperature on the right and then pressing the up or down button until you reach the desired cooling temperature. 6. Repeat this process for each of the three remaining ...

25 PROGRAMMING THE THERMOSTAT 10. Continue to repeat step 8, then steps 4 through 7 to pro- gram remaining days. 11. Press the done button on the right when you’ve com- pleted the process. 12. Close the door. Using the programmable fan When you use the instructions on page 45 in the Advanced Program...

26 PROGRAMMING THE THERMOSTAT Programming a vacation schedule You can program a special heating and cooling schedule to follow when you will begone for a vacation or an extended period of time. 1. Open the door.2. Press the set button on the left side repeatedly until the screen shows vacation setti...

27 PROGRAMMING THE THERMOSTAT 7. Press the up or down button on the side and stop at the desired setting. 8. To change the fan from a uto to on , press the fan button at the top. 9. To change the thermostat mode to heat, cool, Em heat or heat/cool (auto) , press the mode button at the top until the ...

28 PROGRAMMING THE THERMOSTAT 1. Press the schedule button at the top until the arrow is next to vacation . 2. You will see the next day’s date at the bottom of the screen under the words return on . There is a box around the date. To set the date ( D ) you will return home, press the up button and ...

29 OPERATING THE THERMOSTAT Using the thermostat to turn the heating and cooling system off Here’s how to use the thermostat to turn the heating and cooling system off. 1. Open the door.2. Press the mode button on the top left repeatedly until the display shows off in the upper left. 3. Close the do...

30 OPERATING THE THERMOSTAT Changing the humidity level Your thermostat offers three humidity* options: normal, auto and off. It is set at thefactory for “normal humidify,” which is a fixed setting based on how much humidity you want in the home. This humidity level remains constant, regardless ofth...

31 OPERATING THE THERMOSTAT 3. Press the up or down button to change the setting. It is factory - set at 26% for humidify and 60% for dehumidify.It there’s too much condensation on the windows, try alower number. If the air is too dry, try a higher number. Ifyour home is newer and has quality window...

32 OPERATING THE THERMOSTAT 3. Press the up or down button to change this auto humidi- fy set at number (1 through 9). If there is too much con- densation on the windows, select a number lower than 5.If there seems to be a lot of static electricity, which oftenmeans the air is too dry, select a numb...

33 OPERATING THE THERMOSTAT Using emergency heat (heat pump systems only) Emergency heat is useful when the automatic auxiliary heat system can’t keepup with demand. (Systems with heat pumps use “auxiliary heat” when it’s too cold outside for the heat pump to heat the house without help. The display...

34 ADVANCED PROGRAMMING OPTIONS Advanced programming display codes chart You can customize several features of your thermostat. This chart shows whichfeatures you can change and the codes associated with them. The codes will be shown on the display when you follow the instructions. Feature Configura...

35 ADVANCED PROGRAMMING OPTIONS Clearing the reset reminders The thermostat tells you when it’s time to change the UV light in the evaporator coilbox connected to the furnace (if equipped), humidifier pad (if equipped), and furnace filter. (See page 47 for more information.) When the reminder icons ...

37 ADVANCED PROGRAMMING OPTIONS Changing from Fahrenheit to Celsius Your thermostat is preset to display the temperature in degrees Fahrenheit. You canchange this to Celsius. 1. Open the door.2. Press and hold the buttons underneath the heat and cool setpoints simultaneously (the two bottom buttons ...

38 ADVANCED PROGRAMMING OPTIONS Adjusting or turning off the continuous backlighting Your thermostat may feature a low level amount of backlighting until you press anybutton, which increases the lighting temporarily. You can adjust the intensity of the backlighting or turn if off completely. The ran...

40 ADVANCED PROGRAMMING OPTIONS Keypad lockout The keypad lockout feature lets you “lock” the thermostat at one of three levels thatincreasingly limit anyone’s ability to make changes by pressing buttons. The levels are:1 – You can change the temperature settings, the time of day, and the day of the...

41 ADVANCED PROGRAMMING OPTIONS 5. Press the done button. 6. Close the door. Unlocking the Keypad Here’s how to temporarily unlock the keypad after you have locked it. 1. Open the door.2. Press and hold the up and down buttons on the right simultaneously for about five seconds. 3. The padlock icon w...

42 ADVANCED PROGRAMMING OPTIONS Changing from programmable to nonprogrammable It is possible to convert your thermostat’s operation from programmable tononprogrammable. This eliminates its advanced features. When switching to the nonprogrammable format, you lose the programming, hold, vacation and S...

43 ADVANCED PROGRAMMING OPTIONS 4. Press the rightmost lower button then press the up arrow button until the screen displays nP (nonprogrammable). 5. Press the done button. 6. Close the door.

44 ADVANCED PROGRAMMING OPTIONS Changing the number of programming periods Your thermostat is preset with four time periods. You can change this to two. Here’show to change the number of periods in the day. 1. Open the door.2. Press and hold the buttons underneath the heat and cool setpoints simulta...

45 ADVANCED PROGRAMMING OPTIONS Turning on the programmable fan feature When you turn on the programmable fan feature using these instructions, you canprogram the fan selection to “auto” or “on” for each of the program schedule periods. (Learn more about this on page 25.) 1. Open the door.2. Press a...

46 ADVANCED PROGRAMMING OPTIONS Turning off the daylight savings time feature The thermostat will automatically change the clock according to daylight savingstime procedures twice a year. Here’s how to turn off the daylight savings time feature so the clock doesn’t automatically change. 1. Open the ...

47 SPECIAL FEATURES Hybrid Heat (heat pump with a furnace system only) This thermostat works with the Carrier Hybrid Heat systems offering maximumcomfort and economy by automatically controlling whether your system delivers heating with the heat pump, with the furnace, or with both options workingto...

48 SPECIAL FEATURES Auto changeover The thermostat displays one of five modes: heat, cool, Em heat (heat pump version only), heat cool (auto mode) and off . When the mode selection is for both heating and cooling – auto mode – the thermostat is in auto changeover mode. Thisallows the system to switc...

49 WHAT IF . . . “Auxiliary heat on” is displayed (heat pump and Hybrid Heat systemsonly) Auxiliary heat on applies only to the heat pump version. If it is on, you will see auxiliary heat on . When it is displayed, it means the system has determined that it’s too cold outside for your heat pump to h...

50 WHAT IF . . . You get a service reminder message Service reminder messages – check UV light, check hum pad, check filter – tell you that it’s time to change the UVC lamp in the evaporator coil box connected to the furnace (when installed), humidifier pad (when installed), and furnace filter.Make ...

51 COMMON TERMS AND WHERE TO FIND THEM Auto changeover page 48 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . This feature automatically switches your system from heating to cooling – or fromcooling to heating – whenever necessary when in auto mode only (heat/coo...

52 COMMON TERMS AND WHERE TO FIND THEM Dehumidify page 30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . When your heating and cooling system is used to dehumidify the air and thethermostat is set up to dehumidify, the thermostat will instruct it to remov...

53 COMMON TERMS AND WHERE TO FIND THEM Humidify page 30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . When your heating and cooling system includes a humidifier, the thermostat willinstruct it to add moisture to the air as necessary when the heat i...

54 COMMON TERMS AND WHERE TO FIND THEM Service reminders page 47 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The thermostat tells you when it’s time to change the UVC lamp (if equipped), humidifier pad (if equipped) and furnace filter. (For safety rea- sons, ask...