Carrier 10KW- User Manual

Carrier 10KW

Carrier 10KW– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
Page: / 4

Table of Contents:

  • Page 2 – FEATURES; Carrier; UNIT
  • Page 3 – SPECIFICATIONS; GENERATOR
  • Page 4 – PRIORITY LOAD CENTER; Transfer Switch Features
Loading the manual

Includes:

• Two Line LCD Digital Controller

(10 & 14 kW)

• Automatic Transfer Switch

with Built-In Priority Load Center

• Electronic Governor (10 & 14 kW)
• Pre-wired External Connection Box
• External Main Circuit Breaker

& System Status LED (10 & 14 kW)

• Flexible Fuel Line Connector
• Composite Mounting Pad
• Pre-wired conduits
• Natural Gas or LP Gas Operation
• UL 2200 Listed

FEATURES

¡

INNOVATIVE DESIGN & PROTOTYPE TESTING

are key components

of Carrier

®

's success in “IMPROVING POWER BY DESIGN.” But it

doesn’t stop there. Total commitment to component testing, reliability
testing, environmental testing, destruction and life testing, plus testing
to applicable CSA, NEMA, EGSA, and other standards, allows you
to choose Carrier

®

with the confidence that these systems will provide

superior performance.

¡

IMPROVED ELECTRICAL TECHNOLOGY:

Superior harmonics and sine

wave form produce less than 5% Total Harmonic Distortion for utility quality
power. This allows confident operation of sensitive electronic equipment and
micro-chip based appliances, such as variable speed HVAC.

¡

TEST CRITERIA:

PROTOTYPE TESTED

NEMA MG1-22 EVALUATION

SYSTEM TORSIONAL TESTED

MOTOR STARTING ABILITY

¡

SOLID-STATE, FREQUENCY COMPENSATED VOLTAGE REGULATION:

This state-of-the-art power maximizing regulation system is standard on
all Carrier

®

models. It provides optimized FAST RESPONSE to changing

load conditions and MAXIMUM MOTOR STARTING CAPABILITY by
electronically torque-matching the surge loads to the engine.

¡

SINGLE SOURCE SERVICE RESPONSE

from Carrier

®

's dealer network

provides parts and service know-how for the entire unit, from the engine
to the smallest electronic component.

¡

CARRIER

®

TRANSFER SWITCHES:

Long life and reliability are

synonymous with Carrier

®

. One reason for this confidence is that the

Carrier

®

product line includes its own transfer systems and controls for

total system compatibility.

STANDBY GENERATORS

8 kW - 10 kW - 14 kW

Air-Cooled Gas Engine Generator Sets

Continuous Standby Power Rating

Model ASPDS1XXA008 (Steel - Gray) - 8 kW 60Hz

Model ASPDS1XXA010 (Steel - Gray) - 10 kW 60Hz
Model ASPDS1XXA014 (Steel - Gray) - 14 kW 60Hz

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - FEATURES; Carrier; UNIT

FEATURES Carrier ® Standby Generator - 8 kW - 10 kW - 14 kW ENGINE •Generac (OHVI) Design •”Spiny-lok” cast iron cylinder walls •Electronic ignition/spark advance •Full pressure lubrication system •Low oil pressure shutdown system •High temperature shutdown Maximizes engine “breathing” for increased...

Page 3 - SPECIFICATIONS; GENERATOR

Rating definitions - Standby: Applicable for supplying emergency power for the duration of the utility power outage. No overload capability is available for this rating. (All ratings in accordance with BS5514, ISO3046 and DIN6271). * Maximum wattage and current are subject to and limited by such fac...

Page 4 - PRIORITY LOAD CENTER; Transfer Switch Features

731.9 [28.8] 637.6 [25.1] LEFT SIDE VIEW 642 [25.3] 76.2 [3.0] PEA GRAVEL MINIMUM TRANSFER SWITCH 8KW - 17KW (IF SUPPLIED) TRANSFER SWITCH 20KW (IF SUPPLIED) 1218 [47.9] FRONT VIEW 1226 [48.3] H2 H1 W1 W2 H2 H1 W1 W2 Carrier ® Standby Generator - 8 kW - 10 kW - 14 kW TRANSFER SWITCH & PRIORITY L...

Other Carrier Models