Canon MF55DD Series - Manual

vii Transporting the Machine by Car . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-20 Chapter 9 Troubleshooting Clearing Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1 Removing Jammed Paper from Inside the Machine...

viii Preface Thank you for purchasing the Canon imageCLASS MF5500 Series. Please read this manual thoroughly before operating the machine in order to familiarize yourself with its capabilities, and to make the most of its many functions. After reading this manual, store it in a safe place for future...

ix Illustrations Used in This Manual Unless otherwise mentioned, illustrations used in this manual are those taken when no optional equipment is attached to the imageCLASS MF5550. The model imageCLASS MF5550 is used for illustration purposes in this manual. When there is any difference between MF553...

x Legal Notices FCC (Federal Communications Commission) imageCLASS MF5530: Model H12294 This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept an interference receive...

xi Laser Safety This product complies with 21 CFR Chapter 1 Subchapter J as a Class I laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. Class I levels of laser radiation are...

xii Trademarks Canon, the Canon logo, and imageCLASS are trademarks of Canon Inc. Other product and company names herein may be the trademarks of their respective owners. Copyright Copyright 2003 by Canon Inc. All rights reserved. No part of this publication may be reproduced or transmitted in any f...

xiv Important Safety Instructions Please read these "Important Safety Instructions" thoroughly before operating the machine. As these instructions are intended to prevent injury to the user or other persons or destruction of property, always pay attention to these instructions. Also, since i...

xv • Do not install the machine in the following locations: - A damp or dusty location - A location near water faucets or water - A location exposed to direct sunlight - A location subject to high temperatures - A location near open flames - A location near devices that contain magnets or generate m...

xvi CAUTION • Do not use power supplies with voltages other than those specified herein, as this may result in a fire or electrical shock. • Always grasp the power plug when disconnecting the power cord. Pulling on the power cord may expose or snap the core wire, or otherwise damage the power cord. ...

xvii • To avoid damage to the power cord and creating a fire hazard, always disconnect the power cord and the interface cable when moving the machine. Otherwise, the power cord or interface cable may be damaged, resulting in a fire or electrical shock. • Do not drop paper clips, staples, or other me...

xix Consumables WARNING • Do not burn or throw used toner cartridges into open flames, as this may cause the toner remaining inside the cartridges to ignite, resulting in burns or a fire. • Do not store toner cartridges or copy paper in places exposed to open flames, as this may cause the toner or p...

CHAPTER Customer Support 1-1 1 Introduction This chapter describes the main components, the operation panel and the standby display of the machine. It also explains how to set the energy saver function. Customer Support Your machine is designed with the latest technology to provide trouble-free oper...

Main Components of the Machine 1-2 Introduction 1 Main Components of the Machine This section describes the main components of the machine. ■ MF5550 Front View a a a a ADF (Automatic Document Feeder) Holds documents and feeds them automatically into the scanning unit. b b b b Document feeder tray Pl...

Operation Panel 1-5 Introduction 1 Operation Panel This section describes keys used when making copies, scanning and setting the Menu. For keys not described here, see Chapter 1, "Introduction," in the Facsimile Guide . ■ MF5550 a a a a Alarm indicator Flashes red when the machine has a prob...

Standby Display 1-7 Introduction 1 Standby Display The standby display differs depending on which mode is selected. The standby display in the Copy or Scan mode is as follows: ■ Copy Mode ■ Scan Mode NOTE • When the machine is plugged in, the LCD displays <PLEASE WAIT> for a while, then the st...

Energy Saver Mode 1-8 Introduction 1 Energy Saver Mode This machine provides an energy saver function. When no operations are performed for about 5 minutes, the machine automatically enters the energy saver mode. NOTE • The time until the machine enters the energy saver mode can be specified in a ra...

Energy Saver Mode 1-9 Introduction 1 Restoring from the Energy Saver Mode Manually 1 Press [Energy Saver]. The Energy Saver key goes off and the machine enters the standby mode. NOTE The machine can be restored from the energy saver mode immediately. However, it may vary according to room temperatur...

CHAPTER Print Media Requirements 2-1 2 Paper Handling This chapter describes the print media you can use with this machine, how to load them, and where to print out the documents. Print Media Requirements For high-quality copies, we recommend using paper and transparencies recommended by Canon. Some...

Print Media Requirements 2-3 P aper Handling 2 Printing Areas Please note that the term "printing area" represents both the recommended area for optimum print quality and the entire area where the machine can technically print from your computer. Printing area (light shade) : Canon recommend...

Loading Paper 2-4 P aper Handling 2 Loading Paper This section describes how to load paper in the cassette and the multi-purpose feeder. CAUTION When loading paper, take care not to cut your hands on the edges of the paper. NOTE • The paper in the multi-purpose feeder is fed prior to the paper in th...

Loading Paper 2-5 P aper Handling 2 3 Pinch and slide the length slide guide to fit the size of the paper stack you want to load. IMPORTANT If the slide guides are not adjusted correctly for the size of the paper, the quality of your printouts may be adversely affected. 4 Load the paper stack in the...

Loading Paper 2-6 P aper Handling 2 5 Pinch and slide the width slide guides to fit the paper stack. Make sure the paper stack does not exceed the load limit mark. 6 Insert the cassette into the machine. NOTE If you do not completely insert the cassette into the machine, paper jams may occur. Hooks ...

Loading Paper 2-7 P aper Handling 2 7 Specify the paper size. ❑ Press [Menu] ➞ [ ] or [ ] to select <COMMON SETTINGS> ➞ press [Set]. ❑ Press [ ] or [ ] to select <PAPER SETTINGS> ➞ press [Set] ➞ [ ] or [ ] to select <PAPER SIZE> ➞ press [Set]. ❑ Press [ ] or [ ] to select the appro...

Loading Paper 2-8 P aper Handling 2 2 Remove any curling from the envelopes by holding the edges diagonally and bending them gently. 3 Run a pen or other rounded object along the back flaps to flatten them. The flaps should not bulge more than 13 / 64 " (5 mm). 4 Tap the edges on a flat surface ...

Loading Paper 2-10 P aper Handling 2 8 Pinch and slide the width slide guides to fit the envelopes. Make sure the envelopes do not exceed the load limit mark. 9 Insert the cassette into the machine. NOTE If you do not completely insert the cassette into the machine, paper jams may occur. Hooks Hook ...

Loading Paper 2-11 P aper Handling 2 10 Specify the paper size. ❑ Press [Menu] ➞ [ ] or [ ] to select <COMMON SETTINGS> ➞ press [Set]. ❑ Press [ ] or [ ] to select <PAPER SETTINGS> ➞ press [Set] ➞ [ ] or [ ] to select <PAPER SIZE> ➞ press [Set]. ❑ Press [ ] or [ ] to select <ENV...

Loading Paper 2-13 P aper Handling 2 Loading an Envelope in the Multi-Purpose Feeder Use the multi-purpose feeder when you want to copy or print an envelope one by one. IMPORTANT The recommended envelopes are COM10, MONARCH, DL, and ISO-C5. Using other envelopes may affect the quality of the printou...

Loading Paper 2-14 P aper Handling 2 3 Specify the paper size. ❑ Press [Menu] ➞ [ ] or [ ] to select <COMMON SETTINGS> ➞ press [Set]. ❑ Press [ ] or [ ] to select <PAPER SETTINGS> ➞ press [Set] ➞ [ ] or [ ] to select <PAPER SIZE> ➞ press [Set]. ❑ Press [ ] or [ ] to select <ENVE...

Loading Paper 2-15 P aper Handling 2 Orientation of the Document and the Paper Loading When you load a document in the ADF, the orientation of the document and the orientation of the paper in the cassette or in the multi-purpose feeder are as shown below. When you place a document on the platen glas...

Selecting the Paper Output Area 2-16 P aper Handling 2 Selecting the Paper Output Area Face down paper output delivers paper with the printed side down on the output tray. Face up paper output delivers paper with the printed side up out of the face up paper output. Select the area depending on your ...

Selecting the Paper Output Area 2-17 P aper Handling 2 Paper Type and Paper Output Area Select the suitable paper output area depending on the paper type and your purpose. Face Down Paper Output Area The paper is delivered with the printed side down on the output tray. Paper is stacked in printed or...

Selecting the Paper Output Area 2-18 P aper Handling 2 Face Up Paper Output Area The paper is delivered with the printed side up out of the face up paper output on the back side of the machine. This way is convenient for printing on transparencies, envelopes, or labels which tend to curl, because th...

CHAPTER Document Requirements 3-1 3 Document Handling This chapter describes the types of documents you can scan, copy or send with this machine and how to set them on the platen glass or in the ADF. Document Requirements The documents you place on the platen glass or loaded in the ADF for copying, ...

Document Requirements 3-2 Document Handling 3 * 1 When scanning, copying, and sending a transparent document such as tracing paper or transparencies, place a piece of plain white paper behind the document. * 2 21 lb (80 g/m 2 ) paper NOTE When making copies of a small size document, the copy speed m...

Setting Up Documents 3-3 Document Handling 3 Setting Up Documents For scanning, place your documents on the platen glass or load them in the ADF. Where you set up your documents depends on the size and type of documents you want to scan. (See "Document Requirements," on p. 3-1.) Placing a Do...

Setting Up Documents 3-4 Document Handling 3 The illustration below shows how to place an LTR-size document on the platen glass. Loading Documents in the ADF NOTE Make sure there is no document on the platen glass. 1 Fan the edges that will feed into the machine first, then tap the edges of multiple...

Setting Up Documents 3-5 Document Handling 3 2 Slide the slide guides to the width of the document. 3 Load the documents face up in the ADF. NOTE • For multiple page documents, the pages are fed one by one from the top of the stack (from the first page). • Wait until all pages of your document have ...

Setting Up Documents 3-6 Document Handling 3 The Paper Path of the ADF NOTE • When documents are loaded in the ADF, the scanning unit moves to the position shown above and stays there. • When documents are not loaded in the ADF, the scanning unit moves to scan it. Scanning unit 3 2 1 The machine sca...

CHAPTER Before Printing 4-1 4 Printing from Your Computer This chapter explains how to print the documents from your computer using the printer driver included in the CD-ROM. Before Printing Before printing, software must be installed in your computer. • If not, please see "Install the software ...

Before Printing 4-2 Pr inting from Y our Computer 4 Follow this procedure if it is not selected: 1 Open the [Printers and Faxes] (Windows 98/Me/2000: [Printers]) folder. ● On Windows XP: ❑ Click [Start] on the Windows task bar, select [Control Panel] ➞ [Printers and Other Hardware] ➞ [Printers and F...

Printing Documents 4-3 Pr inting from Y our Computer 4 Printing Documents The general steps for printing a document are explained below. The screen shot shown is from Windows XP. 1 Open the application from which you will print the document. 2 Select the command to print. In most cases, click [Print...

Printing Documents 4-4 Pr inting from Y our Computer 4 4 Click [Preference] or [Properties]. NOTE Depending on the application you are using, select the printer to be used in the [General] tab sheet in the [Print] dialog box, then specify the print settings in the corresponding tab sheet. (Only for ...

More Information 4-5 Pr inting from Y our Computer 4 More Information For detailed information on all printing features, see Chapter 2, "Printing," in the Software Guide .

CHAPTER Documents You Can Copy 5-1 5 Copying This chapter explains how to make copies, adjust scan settings to improve the image quality, and enlarge or reduce the copy sizes. It also describes the special copy features. Documents You Can Copy For information on the types of documents you can copy, ...

Making Copies 5-2 Cop ying 5 Making Copies Follow this procedure to make copies: 1 Place the document on the platen glass or load it in the ADF. For details on how to place or load documents, see "Setting Up Documents," on p. 3-3. 2 Press [COPY]. 3 Use the numeric keys to enter the number of...

Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose Feeder) 5-3 Cop ying 5 Specifying the Paper Size and Type(Common for Cassette and Multi-Purpose Feeder) NOTE • When making copies on LTR-size paper after having continuously copied on paper smaller than LTR-size paper, the cop...

Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose Feeder) 5-4 Cop ying 5 5 Press [ ] or [ ] to select the appropriate paper size (LTR, LGL, EXECUTIV, A4, B5, ENVELOPE, or FREE SIZE) ➞ press [Set]. ● When <ENVELOPE> is selected: ❑ Press [ ] or [ ] to select the type of e...

Setting Enlarging/Reducing 5-6 Cop ying 5 Setting Enlarging/Reducing When placing a document on the platen glass, you can enlarge or reduce the copy size using preset copy ratios or using custom copy ratios. Enlarging/Reducing Using Preset Copy Ratios NOTE You cannot enlarge or reduce the copy size ...

Setting Enlarging/Reducing 5-7 Cop ying 5 NOTE • If the <PAPER SIZE GROUP> of <COPY SETTINGS> in the Menu is set to <A> or <AB>, the preset copy ratios will be as follows:- A: 50%, 70%, 100%, 141%, 200%- AB: 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200%For details, see <...

Improving Copied Image 5-8 Cop ying 5 Improving Copied Image Adjusting the Image Quality (Resolution) You can adjust image quality to the appropriate level best suited for a document with text or photos. Three modes are available for adjusting the image quality. 1 Press [Image Quality]. 2 Press [ ] ...

Special Features 5-10 Cop ying 5 Special Features The machine has the following SPECIAL COPY feature: Collate Copy. This feature allows you to sort copies in page order. Collate Copy The collate copy allows you to sort copies in page order. It is convenient when you make multiple copies of multiple ...

Special Features 5-11 Cop ying 5 4 Press [Start]. The machine begins scanning from the first page of the document. After scanning, the scanned documents will come out in order. NOTE When scanning multiple page documents, <MEMORY FULL> and <PRESS SET KEY> may appear in the LCD, and the do...

CHAPTER Before Scanning 6-1 6 Scanning This chapter briefly explains how to scan documents into your computer using the scanner driver included in the CD-ROM. Before Scanning Before scanning, software must be installed in your computer. • If not, please see "Install the software and connect the ...

Scanning Methods 6-2 Scanning 6 Scanning Methods There are two methods of scanning documents to your computer: • Using a TWAIN- or WIA- (Windows XP) compliant Windows application • Using [SCAN] on the operation panel of the machine IMPORTANT • When using [SCAN], the ADF is not available for scanning...

CHAPTER Checking the Status of Print and Fax Jobs 7-1 7 System Monitor This chapter explains how to check the status of the jobs stored in the machine, and to confirm or delete them as needed. Checking the Status of Print and Fax Jobs Use [Status Monitor] to confirm or delete a job.You can select a ...

Checking the Status of Print and Fax Jobs 7-2 System Monitor 7 3 If you decide to delete the current print job, press [ ] for <YES>. NOTE • To cancel deleting the job, press [ ] for <NO>. • Once the job is deleted, the job cannot be restored. Confirming and Deleting a Fax TX Job 1 Press ...

Checking the Status of Print and Fax Jobs 7-3 System Monitor 7 Confirming and Deleting a Fax RX Job 1 Press [Status Monitor]. 2 Press [ ] or [ ] to select <FAX RX> ➞ press [Set]. NOTE • If there is no job, <NO FAX JOBS EXIST> is displayed. • If there is only one fax job, go to step 4. 3 ...

CHAPTER Periodic Cleaning 8-1 8 Maintenance This chapter explains how to clean the machine, replace the toner cartridge, and repack and transport the machine. Periodic Cleaning Your machine requires little periodic maintenance. This section describes the necessary cleaning procedures for your machin...

Periodic Cleaning 8-2 Maintenance 8 Cleaning the Exterior Wipe the machine's exterior with a clean, soft, lint-free cloth moistened with water or diluted dishwashing detergent solution. Cleaning the Scanning Area Wipe the scanning area (shaded area) with a clean, soft, lint-free cloth moistened with...

Periodic Cleaning 8-3 Maintenance 8 Cleaning the ADF Area Black lines may appear in copies when the ADF is used to feed documents.This is caused by paste, ink, correction fluid, or other foreign matters in the read area of the platen glass (shaded area). Use a clean soft cloth to wipe the read area ...

When to Replace the Cartridge 8-4 Maintenance 8 When to Replace the Cartridge The cartridge is a consumable item and should be replaced when the toner runs out. If white streaks or light bands appear on the printouts, the toner is running low. NOTE When handling the cartridge, take care not to allow...

When to Replace the Cartridge 8-5 Maintenance 8 3 Reinstall the cartridge in the machine. 4 Make a few test copies. ● If the copies appear normal: You can keep using the cartridge. However, a new one will be needed soon. ● If white streaks or light bands are still present: ❑ Replace the cartridge wi...

When to Replace the Cartridge 8-6 Maintenance 8 Handling and Storing the Cartridge This section describes the precautions to ensure optimum copy quality. Handling Precautions WARNING • Do not throw the cartridge into open flames, as this may cause the toner to ignite and result in burns or a fire. •...

When to Replace the Cartridge 8-7 Maintenance 8 IMPORTANT • Place the cartridge in its protective bag so that the side with the written instructions faces up. Then, place the bagged cartridge into its shipping box. Store the unused cartridge out of direct sunlight. • For partially used/opened cartri...

When to Replace the Cartridge 8-8 Maintenance 8 The Clean Earth Campaign THE CANON CARTRIDGE RECYCLING PROGRAM The Canon Cartridge Recycling Program fulfills the first initiative of Canon's Clean Earth Campaign, which supports four critical environmental areas: • Recycling in the Workplace • Conserv...

When to Replace the Cartridge 8-9 Maintenance 8 U.S.A. PROGRAM Packaging ■ Option A-1: Single Box Return • Repackage the empty cartridge utilizing the wrapper and pulp mould end-blocks from the new cartridge's box. • Place the empty cartridge in the box of your new cartridge. Seal the box. ■ Option ...

When to Replace the Cartridge 8-11 Maintenance 8 Shipping Apply the UPS authorized returning label provided in this guide. Residents of Alaska and Hawaii: Do not use the UPS authorized returning label. For Alaska and Hawaii Canon set up alternative mail service with the U.S. Postal Service.Please ca...

When to Replace the Cartridge 8-12 Maintenance 8 CANADA PROGRAM-CANADA PROGRAMME ■ Option A: Single Box Return • Repackage the empty cartridge utilizing the wrapper and pulp mould end-blocks from the new cartridge's box. • Place the empty cartridge in the box of your new cartridge. Seal the box. • A...

Replacing the Cartridge 8-14 Maintenance 8 Replacing the Cartridge This section describes how to remove the used cartridge and replace it with a new one. Before replacing the cartridge, be sure to read the section "When to Replace the Cartridge," on p. 8-4. NOTE When handling the cartridge, ...

Replacing the Cartridge 8-15 Maintenance 8 3 Remove the new cartridge from its protective bag. NOTE Save the protective bag. You may need it later when you remove the cartridge from the machine. 4 Rock the cartridge five or six times to distribute the toner evenly. 5 Place the cartridge on a flat an...

Repacking and Transporting Your Machine 8-18 Maintenance 8 Repacking and Transporting Your Machine Be sure to unplug the power cord before transporting the machine. If the machine is likely to be subjected to vibration (e.g., when transporting over long distances), the following precautions should b...

Repacking and Transporting Your Machine 8-19 Maintenance 8 Carrying the Machine by the Sides Pull out the cassette completely, and remove the extension cover.Push in the output tray, and close the document feeder tray.Grip the handles on both sides of the machine and lift it carefully, as shown in t...

Repacking and Transporting Your Machine 8-20 Maintenance 8 Transporting the Machine by Car Pack the machine, using the original packing material and box. Place the machine on a level, stable surface. IMPORTANT • Do not leave the machine inside a car for a long period of time; the temperature can bec...

CHAPTER Clearing Jams 9-1 9 Troubleshooting This chapter describes the problems you might encounter when using the machine and their remedies. It also explains what to do if you cannot solve the problem by yourself. Clearing Jams This section describes how to remove jammed paper. Removing Jammed Pap...

Clearing Jams 9-3 T roub leshooting 9 6 Remove the cartridge. IMPORTANT • Remove watches and any bracelets or rings when touching the inside of the machine. These items might be damaged if they come into contact with the parts inside the machine. • When removing the jammed paper, do not touch the tr...

Clearing Jams 9-6 T roub leshooting 9 12 Carefully pull the jammed paper straight out through the rollers. If the jammed paper is badly folded, similar to the folds of an accordion, ease the jammed paper loose and then pull it out of the machine. 13 Push the paper release levers back to their origin...

Clearing Jams 9-7 T roub leshooting 9 14 Insert the cartridge back into the machine, then close the front cover. For details, see "Replacing the Cartridge," on p. 8-14. IMPORTANT After you replace the cartridge and close the front cover, the machine should be ready for operating. If the mach...

LCD Messages 9-9 T roub leshooting 9 LCD Messages The following messages are displayed in the LCD when the machine performs a function or if it encounters an error. This section describes the general messages and those related to copy and print functions. For the messages related to fax functions, s...

Paper Feeding Problems 9-12 T roub leshooting 9 Paper Feeding Problems Paper does not feed correctly. Q Does the cassette or multi-purpose feeder contain an appropriate quantity of sheets? A Make sure the paper stack in the cassette or the paper in the multi-purpose feeder does not exceed the capaci...

Copying Problems 9-15 T roub leshooting 9 Copying Problems The machine will not make a copy. Q Is the cartridge installed correctly? A Make sure the cartridge is installed correctly. (See "Install the cartridge," in the Set-Up Sheet .) Q Is the sealing tape removed from the cartridge? A Remo...

Print Quality Problems 9-16 T roub leshooting 9 Print Quality Problems The print quality is not what you expect; print is not clear, has missing dots or white streaks. Q Are the size, thickness and type of the paper you are using within the specifications of the machine? A Check that the paper you a...

Printing Problems 9-18 T roub leshooting 9 Printing Problems The Alarm indicator comes on. Q Does the machine feed paper correctly, or is there paper in the cassette or multi-purpose feeder? A Clear the paper jam, or load paper in the cassette or multi-purpose feeder. (For instructions on clearing p...

Scanning Problems 9-19 T roub leshooting 9 Scanning Problems The machine will not scan a document. Q Did you connect the power cord to the machine just now? A Wait for a while. After connecting the power cord, the machine cannot scan documents immediately. Q Is the document loaded correctly? A Remov...

General Problems 9-20 T roub leshooting 9 General Problems The machine has no power. Q Is the power cord plugged in securely? A Check that the power cord is plugged securely into the machine and into the wall outlet. Insert the power cord straight into the power socket on the back of the machine. Do...

If You Cannot Solve the Problem 9-21 T roub leshooting 9 If You Cannot Solve the Problem If you have a problem with your machine and you cannot solve it by referring to the information in this chapter, contact Canon Authorized Service Facilities or the Canon Customer Care Center. CAUTION If the mach...

CHAPTER Accessing the Machine Settings 10-1 10 Machine Settings This chapter explains how to adjust machine settings. The list of all the settings is also provided for your reference. NOTE To specify or register the settings of the fax function, see Chapter 8, "Machine Settings," in the Facs...

Menu Descriptions 10-3 Machine Settings 10 Menu Descriptions COMMON SETTINGS Name Descriptions PAPER SETTINGS Sets the paper size and paper type. 1. PAPER SIZE Selects the paper size. LTR , LGL, EXECUTIV, A4, B5, ENVELOPE (COM10, MONARCH, DL, ISO-C5), FREE SIZE (HORIZONTAL (height: 76 mm to 216 mm (...

Menu Descriptions 10-4 Machine Settings 10 (The factory default setting is in bold face.) * Only for the MF5550 model. COPY SETTINGS 3. AUTO CLEAR Sets the auto clear function. If the machine remains idle for a set amount of time, the display returns to the standby mode. ON Sets the time until the m...

CHAPTER Specifications 11-1 11 Appendix This chapter lists the specifications of the machine and the index. Specifications Type Personal Desktop Platen StationaryAutomatic Document Feeder: 30 sheets or paper stack within 5 / 16 " (8 mm) thickness including curled sheets (guaranteed)50 sheets (21...

Index 11-3 Appendix 11 Index Symbols (–), (+) keys, 1-5 A ADF (Automatic Document Feeder), 1-2 capacity, 3-5jams in, 9-7loading documents in, 3-4paper path, 3-6 Alarm indicator, 1-5AUTO CLEAR setting, 10-4AUTO SORT setting, 10-5 C Cartridge handling, 8-6recycling, 8-7replacing, 8-4, 8-14storage, 8-6...