Canon CanoScan 5200F User Manual

Page 2 - Guide to the Manuals; Open the Package; READ THIS GUIDE FIRST!; User’s Guides for Application Programs (PDF format manuals); ArcSoft PhotoStudio; Warning

Guide to the Manuals 2 Guide to the Manuals • CanoScan and ScanGear are trademarks of Canon Inc.• Adobe ® , Acrobat ® and Photoshop ® are trademarks of Adobe Systems Incorporated. • Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries. • Macintosh,...

Page 3 - English; Check the Package Contents; Scanner and Accessories

Check the Package Contents 3 English Check the Package Contents Scanner and Accessories Documents and Software Programs • Quick Start Guide (this guide)• Additional Documents• CanoScan Setup Utility CD-ROM • The two figures in the brackets below indicate the respective sizes of the Windows/ Macintos...

Page 4 - Install the Software; Turn the computer on.; The installation procedure will start.; After Windows restarts, remove the CD-ROM from; Windows

Install the Software (Windows) 4 Install the Software (Windows) 1 Turn the computer on. 2 Place the CanoScan Setup Utility CD-ROM in the drive. After you select your language, the CanoScan Setup Utility main menu will display. 3 Click [Install the Software]. Read the SOFTWARE USER LICENSE AGREEMENT....

Page 5 - Macintosh

Install the Software (Macintosh) 5 English Install the Software (Macintosh) 1 Turn the computer on. Make sure to log in with the first created administrator to install the software. You cannot install the software when logged in using added administrator accounts. 2 Place the CanoScan Setup Utility ...

Page 6 - Unlock the Scanning Unit; Peel the seals off the scanner.

Unlock the Scanning Unit 6 Unlock the Scanning Unit 1 Peel the seals off the scanner. 2 Gently turn the scanner over. 3 Push the lock switch toward the unlock mark ( ). 4 Return the scanner to a horizontal position. • Unlock the scanning unit before connecting the scanner to the computer. If it is l...

Page 7 - Connect the Scanner; Attach the FAU cable to the FAU connector on the back of the scanner (

Connect the Scanner 7 English Connect the Scanner 1 Attach the FAU cable to the FAU connector on the back of the scanner ( c ). 2 Connect the scanner to the computer with the supplied USB interface cable ( d ). 3 Attach the supplied AC adapter to the scanner. 4 Press ( I ) to turn the power on. • Ma...

Page 8 - Try Scanning; Place a photo or a picture on the glass

Try Scanning 8 Try Scanning The following steps explain how to scan with ArcSoft PhotoStudio. 1 Place a photo or a picture on the glass by aligning its top edge with the alignment mark, and close the document cover. • Make sure that the power switch is turned on. Alignment Mark Top Bottom 2 Select [...

Page 9 - Click the Acquire icon

Try Scanning 9 English 3 Click the [File] menu and choose [Select Source]. Select your scanner model name and click the [Select] button for Windows or the [OK] button for Macintosh. 4 Click the Acquire icon or click the [File] menu and select [Acquire]. ScanGear CS will start. 5 Select the [Select S...

Page 10 - Click close box

Try Scanning 10 8 Select the [Output Size]. You can select from the following options. • If you selected [Print (300 dpi)] in Step 7: Flexible / 4"x6" / A4 / Letter / Add/Delete • If you selected [Image display (150 dpi)] in Step 7: Flexible / 640 x 480 / 800 x 600 / 1024 x 768 / 1600 x 1200...

Page 11 - Using the Scanner Buttons; COPY Button; SCAN Button; will appear. Select an option from the

Using the Scanner Buttons 11 English Using the Scanner Buttons You can use the four convenient buttons on the front of the scanner to scan and perform related tasks easily with a single touch of the button. Place an item on the scanner before pressing a button. • To use these buttons, ScanGear CS, C...

Page 12 - Scanning Film; Positioning the Film; Remove the protective sheet from the document cover.; Film Strip

Scanning Film 12 Scanning Film You can scan 35 mm film (film strip or slides) with this scanner. Positioning the Film Use the following procedures to insert the film into the Film Guide. 1 Remove the protective sheet from the document cover. Slide the protective sheet up to remove it. When you finis...

Page 13 - Slides; Close the document cover.

Scanning Film 13 English d Align the Film Guide’s tab with the FILM symbol on the document glass of the scanner. Slides c Align the Film Guide’s tab with the FILM symbol on the document glass of the scanner. d Place a slide or slides face down in the Film Guide as shown in the diagram to the right. ...

Page 14 - Start ArcSoft PhotoStudio.

Scanning Film 14 Scanning Film The following steps explain how to scan the film with ArcSoft PhotoStudio. 1 Press the power switch on the scanner’s left side to set it the ( I ) position. 2 Start ArcSoft PhotoStudio. Refer to step 2 on page 8 for procedures. 3 Start ScanGear CS. Refer to step 4 on p...

Page 15 - close box

Scanning Film 15 English 8 Select the [Output Size]. You can select from the following options. • If you selected [Print (300 dpi)] in Step 7: Flexible / 4"x6" / A4 / Letter / Add/Delete • If you selected [Image display (150 dpi)] in Step 7: Flexible / 640 x 480 / 800 x 600 / 1024 x 768 / 16...

Page 16 - Compatible USB Expansion Cards/Hubs; Confirming the USB Version; Troubleshooting the USB2.0 Hi-Speed Interface

Using the USB 2.0 Interface expansion cards (Windows Only) 16 Using the USB 2.0 Interface expansion cards (Windows Only) To Switch to USB 2.0 If your computer is equipped with USB 1.1, you can switch to the USB 2.0 environment for faster scanning by purchasing and installing one of the USB 2.0 expan...

Page 17 - Specifications

Specifications 17 English Specifications *1 16 bit output supports only for film scanning. *2 USB 2.0 Hi-Speed mode on Windows PC. Transfer time to computer is not included. *3 Calibration processing time is not included. *4 Note that Macintosh computer with USB 2.0 Hi-Speed interface expansion card...

Page 18 - System Information; • About the Computer Used

System Information 18 System Information This form should be used to record the operating environment for the purchased scanner. If any problems occur with the scanner, you will need this information when you contact our Customer Support Help Desk. Be sure to record the information and store it in a...