Canon CanoScan 4200F User Manual

Page 2 - Guide to the Manuals; Open the Package; READ THIS GUIDE FIRST!; User Guides for Application Programs (PDF format manuals); ArcSoft PhotoStudio; Warning

Guide to the Manuals 2 Guide to the Manuals • CanoScan and ScanGear are trademarks of Canon Inc. • Adobe and Acrobat are trademarks of Adobe Systems Incorporated. • Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries. • ScanSoft and OmniPage are t...

Page 3 - English; Check the Package Contents; Scanner and Accessories

Check the Package Contents 3 English Check the Package Contents Scanner and Accessories Documents and Software Programs • Quick Start Guide (this guide)• Additional Documents• CanoScan Setup Utility CD-ROM • Approximately 200 MB of hard disk space on your computer is required to install all the prog...

Page 4 - Install the Software; Turn the computer on.; The installation procedure will start.; After Windows restarts, remove the CD-ROM from

Install the Software 4 Install the Software 1 Turn the computer on. 2 Place the CanoScan Setup Utility CD-ROM in the drive. After you select your language, the CanoScan Setup Utility main menu will display. 3 Click [Install the Software]. Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if you ...

Page 5 - Unlock the Scanning Unit; Peel the seals off the scanner.

Unlock the Scanning Unit 5 English Unlock the Scanning Unit 1 Peel the seals off the scanner. 2 Gently turn the scanner over. 3 Slide the lock switch toward the unlock mark ( ). 4 Return the scanner to a horizontal position. • Unlock the scanning unit before connecting the scanner to the computer. I...

Page 6 - Connect the Scanner; Attach the supplied AC adapter to the scanner.

Connect the Scanner 6 Connect the Scanner 1 Connect the scanner to the computer with the supplied USB interface cable. 2 Attach the supplied AC adapter to the scanner. • The scanner does not have a power switch. The power is activated as soon as the AC adapter is plugged in. • Only use the USB inter...

Page 7 - Try Scanning; Place a photo or a picture on the glass

Try Scanning 7 English Try Scanning The following steps explain how to scan with ArcSoft PhotoStudio. 1 Place a photo or a picture on the glass by aligning its top edge with the alignment mark, and close the document cover. 2 Select [Start], [Programs] or [All Programs], [ArcSoft PhotoStudio 5.5] an...

Page 8 - Click the Acquire icon

Try Scanning 8 3 Click the [File] menu and choose [Select Source]. Select your scanner model name and click the [Select] button . 4 Click the Acquire icon or click the [File] menu and select [Acquire]. ScanGear CS will start. 5 Select [Select Source]. You can select from the following options. Photo...

Page 9 - Save the scanned image.; Click the close box

Try Scanning 9 English 8 Select the [Output Size]. You can select from the following options. • If you selected [Print ] in Step 7, you can select Flexible, 4"x6", A4 and Letter to match the size of the paper for printing. • If you selected [Image display] in Step 7, you can select Flexible,...

Page 10 - Using the Scanner Buttons; COPY Button; SCAN Button; will appear. Select an option from the

Using the Scanner Buttons 10 Using the Scanner Buttons You can use the four convenient buttons on the front of the scanner to scan and perform related tasks easily with a single touch of the button. Place a photo or a picture on the scanner before pressing a button. • To use these buttons, ScanGear ...

Page 11 - Scanning Film; Positioning the Film; Remove the protective sheet from the document cover.

Scanning Film 11 English Scanning Film You can scan 35 mm film (film strip or slides) with this scanner. Positioning the Film Use the following procedures to insert the film into the Film Guide built into the document cover. 1 Remove the protective sheet from the document cover. Slide the protective...

Page 12 - Insert the film into the Film Guide.; Scanning Curled Film

Scanning Film 12 3 Insert a fingernail into the slot in the Film Guide and open the Film Holder. 4 Insert the film into the Film Guide. Place the film face down with the frames in reverse order. Close the film holder. • Hold the film by the edges with your fingertips to avoid getting fingerprints or...

Page 13 - Return the Film Guide to the document cover.; Close the document cover.

Scanning Film 13 English 5 Return the Film Guide to the document cover. Hold the document cover and c insert the bottom edge of the Film Guide into the bottom groove in the document cover, and then d tilt the top of the Film Guide up into the document cover until it locks securely into place with a ...

Page 14 - Start ArcSoft PhotoStudio.

Scanning Film 14 Scanning Film The following steps explain how to scan the film with ArcSoft PhotoStudio. 1 Start ArcSoft PhotoStudio. Refer to step 2 on page 7. 2 Start ScanGear CS. Refer to step 4 on page 8. 3 Select the [Select Source]. You can select from the following options for films. Negativ...

Page 15 - close box

Scanning Film 15 English 7 Select the [Output Size]. You can select from the following options. • If you selected [Print ] in Step 6, you can select Flexible, 4"x6", A4 and Letter to match the size of the paper for printing. • If you selected [Image display] in Step 6, you can select Flexibl...

Page 16 - Specifications

Specifications 16 Specifications *1 16 bit output supported for film scanning only. *2 The fastest speed in USB 2.0 Hi-Speed mode on Windows PC. Transfer time to computer is not included. *3 Calibration processing time is not included. *4 Slides must be less than 2 mm thick. *5 AC adapter type varie...

Page 17 - System Information; • About the Computer Used

System Information 17 English System Information This form should be used to record the operating environment for the purchased scanner. If any problems occur with the scanner, you will need this information when you contact our Customer Support Help Desk. Be sure to record the information and store...