Canon CanoScan 3200F User Manual

Page 2 - Guide to the Manuals; Open the Package; READ THIS GUIDE FIRST!; User’s Guides for Application Programs (PDF format manuals); ArcSoft PhotoStudio; Warning

Guide to the Manuals 2 Guide to the Manuals • CanoScan and ScanGear are trademarks of Canon Inc.• Adobe ® and Acrobat ® are trademarks of Adobe Systems Incorporated. • Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries. • Macintosh, Power Macinto...

Page 3 - English; Check the Package Contents; Scanner and Accessories

Check the Package Contents 3 English Check the Package Contents Scanner and Accessories Documents and Software Programs • Quick Start Guide (this guide)• Additional Documents• CanoScan Setup Utility CD-ROM • The two figures in the brackets below indicate the respective sizes of the Windows/ Macintos...

Page 4 - The installation procedure will start.; After Windows restarts, remove the CD-ROM from

Install the Software (Windows) 4 Install the Software (Windows) 1 Turn the computer on. 2 Place the CanoScan Setup Utility CD-ROM in the drive. After you select your language, the CanoScan Setup Utility main menu will display. 3 Click [Install the Software]. Read the SOFTWARE USER LICENSE AGREEMENT....

Page 5 - Turn the computer on.

Install the Software (Macintosh) 5 English Install the Software (Macintosh) 1 Turn the computer on. Make sure to log in with the first created administrator to install the software. You cannot install the software when logged in using added administrator accounts. 2 Place the CanoScan Setup Utility ...

Page 6 - Unlock the Scanning Unit; Peel the seals off the scanner.

Unlock the Scanning Unit 6 Unlock the Scanning Unit 1 Peel the seals off the scanner. 2 Gently turn the scanner over. 3 Push the lock switch toward the unlock mark ( ). 4 Return the scanner to a horizontal position. • Unlock the scanning unit before connecting the scanner to the computer. If it is l...

Page 7 - Connect the Scanner; Peel the caution seal from the scanner.

Connect the Scanner 7 English Connect the Scanner 1 Peel the caution seal from the scanner. 2 Connect the scanner to the computer with the supplied USB interface cable. 3 Attach the supplied AC adapter to the scanner. • Make sure that the scanning unit is unlocked. (P.6) • Only use the USB interface...

Page 8 - Try Scanning; Place a photo or a picture on the glass; Macintosh

Try Scanning 8 Try Scanning The following steps explain how to scan with ArcSoft PhotoStudio. 1 Place a photo or a picture on the glass by aligning its top edge with the alignment mark, and close the document cover. Alignment Mark Top Bottom 2 Select [Start], [Programs] or [All Programs], [ArcSoft P...

Page 9 - Click the Acquire icon

Try Scanning 9 English 3 Click the Acquire icon or click the [File] menu and select [Acquire]. If an error message appears, click the [File] menu, choose [Select Source], select your scanner model name and click the [Select] button. ScanGear CS will start. Windows 3 Click the Acquire icon or click t...

Page 10 - Click close box

Try Scanning 10 7 Select the [Output Size]. You can select from the following options. • If you selected [Print] in Step 6: Flexible / 4"x6" / A4 / Letter / Custom Settings • If you selected [Image display] in Step 6: Flexible / 640 x 480 / 800 x 600 / 1024 x 768 / 1600 x 1200 / 2048 x 1536 ...

Page 11 - Using the Scanner Buttons; COPY Button

Using the Scanner Buttons 11 English Using the Scanner Buttons You can use the four convenient buttons on the front of the scanner to scan and perform related tasks easily with a single touch of the button. Place an item on the scanner before pressing a button. • To use these buttons, ScanGear CS, C...

Page 12 - Positioning the Film; Remove the protective sheet from the document cover.; Insert a fingernail into the slot in the Film Guide and; Slide

Scanning Film (for CanoScan 3200F only) 12 Scanning Film (for CanoScan 3200F only) You can scan a single frame of 35 mm film (strips or slides) with CanoScan 3200F. Positioning the Film 1 Remove the protective sheet from the document cover. Slide the protective sheet up to remove it. When you finish...

Page 13 - Place the loaded Film Guide in the correct

Scanning Film (for CanoScan 3200F only) 13 English 4 Clip the Film Holder back into the slots in the Film Guide for a 35 mm strip. Slides do not require the Film Holder to be closed. 5 Place the loaded Film Guide in the correct position on the document glass of the scanner. 6 Close the document cove...

Page 14 - Scanning Film; Start ArcSoft PhotoStudio.

Scanning Film (for CanoScan 3200F only) 14 Scanning Film The following steps explain how to scan the film with ArcSoft PhotoStudio. 1 Start ArcSoft PhotoStudio. Select [Start], [Programs] or [All Programs], [ArcSoft PhotoStudio 5.5] and [PhotoStudio 5.5]. Double-click the [Applications] folder for M...

Page 15 - close box

Scanning Film (for CanoScan 3200F only) 15 English 5 Select the [Destination]. You can select [Print] or [Image display]. When [Print] is selected, the output resolution is set to 300 dpi. When [Image display] is selected, it is set to 150 dpi. [Print] is selected in this example. 6 Select the [Outp...

Page 16 - Using the USB 2.0 Interface; Compatible USB Expansion Cards/Hubs; Confirming the USB Version; Troubleshooting the USB2.0 Hi-Speed Interface

Using the USB 2.0 Interface (On Windows) 16 Using the USB 2.0 Interface (On Windows) To Switch to USB 2.0 If your computer is equipped with USB 1.1, you can switch to the USB 2.0 environment for faster scanning by purchasing and installing one of the USB 2.0 expansion cards available on the market. ...

Page 17 - Specifications

Specifications 17 English Specifications *1 16 bit output supports only for film scanning. *2 USB 2.0 Hi-Speed mode. Transfer time to computer is not included. *3 Calibration processing time is not included. *4 Type of AC adapter depends on the area where the scanner is purchased. • Specifications a...

Page 18 - System Information; • About the Computer Used

System Information 18 System Information This form should be used to record the operating environment for the purchased scanner. If any problems occur with the scanner, you will need this information when you contact our Customer Support Help Desk. Be sure to record the information and store it in a...