Canon 150DIGITAL - Manual

3 COMPATIBLE CAMERAS The SEAFLASH 150 DIGITAL is suitable for CANON and NIKON cameras. It is compatible with digital / film cameras in E-TTL, I-TTL, film -TTL and in manual mode. CANON The SEAFLASH 150 DIGITAL is compatible with the following CANON digital / film cameras listed in E-TTL, film-TTL an...

4 GENERAL DESCRIPTION The SEAFLASH 150 DIGITAL is fully controlled by a micro processor. Some of the significant advantages of using a micro controller are the possibility of managing digital communication on a serial bus with a digital camera and the possibility of easily updating the firmware in o...

IMPORTANT – FOR NIKON USERS For I-TTL use with NIKON cameras S6 sockets on the flash and the camera are recommended. Connect the main flash (master) always to the left socket – the 2.flash ( slave ) to the right socket. If two strobes are used you have to use the dedicated SEACAM - NIKON digital dua...

with a true S.O.S. function. With the power switch (1) in the SOS position a true S.O.S. light signal is generated. This feature can also be used to test the flash. Attention Use the S.O.S. signal only when really needed and never use it to discharge the battery. 9 DISPLAY ERROR CODES If an error is...

• User manual 12 CONNECTIONS Connect the flash to the housing and the camera only as described below. Battery power supply plug Input: 12-14V, 1.5A DC CANON Syncro socket S6 (wires rear view) 1 – Trigger 2 – Camera Data 3 – Ground 4 – TTL / Clock 5 – Ready / Clock 6 – Flash Data CANON digital 1/2 fl...

NIKON Attention Never connect two flash devices parallel to a digital NIKON camera. It can result in serious damage of flash and camera. Syncro socket N5 (wires rear view) 1 – Trigger 2 – TTL / Data 3 – Ground 4 – Acknowledge 5 – Ready / Clock Syncro socket S6 (wires rear view) 1 – Trigger 2 – TTL /...

Nikon film 2 flash NIKON digital 2 flash no digital dual strobe connector (S-N DDSC) installed. NIKON digital 2 flash S-N DDSC SEACAM - NIKON digital 1 2 3 4 5 Camera Mounting-f oot top view 1 2 3 4 5 1 2 3 4 5 D 2 BA T 46 D 1 BA T 46 D 1r BA T 46 D 2r BA T 46 D 1x BA T 46 D 2x BA T 46 1 2 3 4 5 Cam...

dual strobe connector installed. (connection on component side) Connect all wires to the housing socket and to the camera hot shoe following the numbering J1 main strobe (master) J2 2. Strobe (slave) J3 camera (hot shoe) FLASHARM FIXATION Use the M8 stainless steel insert thread at the bottom of the...

13 TECHNICAL DETAILS AND FEATURES • CANON digital E-TTL / film-TTL • NIKON digital I-TTL/ film-TTL • Energy 150 Ws • Uw-guide number 14 - ISO 100 / 1m at full power • Coverage light angle 130° • 180 flashes at full power • Recycle time 0,1 – 2 sec. • Manual light level selection in 7 + 5 different s...

14 WARRANTY A 24 month warranty from the date of invoice for function and tightness applies to the flash delivered. This warranty is valid within the EU member countries – for non EU member countries the warranty of the country to where the article is delivered applies. Warranty repairs do not exten...