Bryant 602B - Manual
Bryant 602B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – LEGEND
- Page 3 – Connections
- Page 5 – EASY SELECT; PIN CONNECTOR
- Page 6 – Fig. 10—ThermidistatTM Wiring for
- Page 11 – If the burners do not light, this lighting sequence is
- Page 12 – Scroll
- Page 14 – Fig. 14—ICM FIOP Electric Schematic—Unit 583B
- Page 15 – TABLE 4—ICM FIOP PHYSICAL DATA—UNIT 683B
- Page 17 – Fig. 15—ICM FIOP Electric Schematic—Unit 683B
- Page 18 – TABLE 7—ICM FIOP PHYSICAL DATA—UNIT 702B
- Page 19 – TABLE 8—702B WITH ICM FIOP ELECTRICAL DATA
- Page 20 – Fig. 16—ICM FIOP Electrical Schematic—702B
- Page 21 – TABLE 9—ICM FIOP PHYSICAL DATA—UNIT 602B; SCROLL COMPRESSOR
- Page 22 – TABLE 10—602B WITH ICM FIOP ELECTRICAL DATA
- Page 23 – Fig. 17—ICM FIOP Electrical Schematic—602B
- Page 24 – SMALL CABINET
- Page 27 – TABLE 23—ELECTRIC HEATER MULTIPLICATION FACTORS
- Page 28 – ICM QUICK REFERENCE GUIDE; QUICK REFERENCE GUIDE; SET-UP INSTRUCTIONS FOR WARMER HEATING TEMPERATURES; according to Installation Instructions.; • Option 17 - Select programmable or non-programmable mode.; Thermidistat Control Configurations; EASY SELECT BOARD; TABLE 24—TROUBLESHOOTING CHART; SYSTEM
NOTE:
Read the entire instruction manual before starting the
installation.
TABLE OF CONTENTS
SAFETY CONSIDERATIONS .....................................................1
INTRODUCTION ..........................................................................2
RECEIVING AND INSTALLATION ..........................................2
ICM FIOP PRE-START-UP..........................................................2
Electrical Connections ..............................................................2
Control Voltage Connections ..............................................2
Standard Connection............................................................2
Easy Select™—583B ..........................................................2
583B Sequence of Operation ..............................................4
Easy Select™—683B ..........................................................5
683B Sequence of Operation ..............................................7
Easy Select™—702B & 602B............................................7
702B & 602B Sequence Of Operation ...............................9
ICM FIOP START-UP ................................................................10
583B Start-Up (ICM FIOP)....................................................10
683B Start-Up (ICM FIOP)....................................................10
702B: Start-Up (ICM FIOP) ..................................................11
602B: Start-Up (ICM FIOP) ..................................................11
ELECTRICAL DATA & SCHEMATICS—ICM FIOP.............12
Physical Data & Electrical Schematics ..................................12
Tables For System Set-Up......................................................12
CARE AND MAINTENANCE ...................................................12
TROUBLESHOOTING ...............................................................13
START-UP CHECKLIST ............................................................13
NOTE TO INSTALLER — READ THESE INSTRUCTIONS
CAREFULLY AND COMPLETELY before installing this unit.
Also, make sure the Owner’s Manual and Service Instructions are
left with the unit after installation.
SAFETY CONSIDERATIONS
Installation and servicing of air-conditioning equipment can be
hazardous due to system pressure and electrical components. Only
trained and qualified personnel should install, repair, or service
air-conditioning equipment.
Untrained personnel can perform basic maintenance functions of
cleaning coils and filters. All other operations should be performed
by trained service personnel. When working on air-conditioning
equipment, observe precautions in the literature, tags, and labels
attached to the unit, and other safety precautions that may apply.
Follow all safety codes. Wear safety glasses and work gloves. Use
quenching cloth for unbrazing operations. Have fire extinguisher
available for all brazing operations.
WARNING:
Improper installation, adjustment, alter-
ation, service, maintenance, or use can cause explosion,
fire, electric shock, or other occurrences, which could
cause serious injury or death or damage your property.
Consult a qualified installer or service agency for infor-
mation or assistance. The qualified installer or agency
must use only factory-authorized kits or accessories when
modifying this product.
Recognize safety information. This is the safety-alert symbol
.
When you see this symbol on the product or in instructions or
manuals, be alert to the potential for personal injury.
Understand the signal words — DANGER, WARNING, CAU-
TION, and NOTE. Danger identifies the most serious hazards,
which will result in severe personal injury or death. Warning
indicates a condition that could cause serious personal injury or
death. Caution is used to identify unsafe practices, which would
result in minor personal injury or product and property damage.
NOTE is used to highlight suggestions which will result in
enhanced installation, reliability, or operation.
The power supply (volts, phase, and hertz) must correspond to that
specified on unit rating plate.
The electrical supply provided by the utility must be sufficient to
handle load imposed by this unit. Electrical supply must match the
voltage requirements listed on unit rating plate.
This installation must conform with local building codes and with
NEC (National Electrical Code). Refer to provincial and local
plumbing or waste water codes and other applicable local codes.
Approved for outdoor installation on wood flooring or on class A,
B or C roof covering materials.
Fig. 1—Puron® Unit (583B Shown)
C99087
ICM FIOP INSTALLATION INSTRUCTIONS
installation, start-up,
—1—
and operating instructions
583B
683B
602B
702B
Cancels:
II 583B-24-2
II 583B-24-3
11-01
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
WARNING: Before performing service or maintenance operations on system, turn off main power to unit andinstall lock-out tag. Turn off accessory heater powerswitch if applicable. Electrical shock could cause severeinjury or death. CAUTION: Puron® (R-410A) systems operate at higher pressures than stan...
pre-programmed table of airflows.The unit must be configured to operate properly with systemcomponents with which it is installed. To successfully configure abasic system (see information printed on circuit board label locatednext to select pins), move the 6 select wires to the pins whichmatch the c...
(1.) If indoor temperature is above temperature set point and humidity is below humidity set point, thermostat closescircuits R to G, R to Y/Y2 and R to O—The unit deliverssingle speed cooling airflow. c. COOLING MODE-DEHUMIDIFICATION (1.) If indoor temperature is above temperature set point and hum...
