Breville BMO650 - User Manual

BMO650-GRT-2019-V1

DWG NUMBER

11.06.19

DATE

PAGES

First Issue

BMO650-GRT-2019-V2

14.06.19

Added serial sticker

BMO650-GRT-2019-V3

TBA 19

Updated French sticker

MODIFICATION DESCRIPTION

RESTRICTED & CONFIDENTIAL

This drawing and all information shown hereon are the
exclusive property of HWI Electrical, and are submitted only on
a confidential basis. The recipient agrees not to reproduce the
drawing, to return it upon request, and that no disclosure of the
drawing or the information shown hereon will be made to a
third party without prior written consent from HWI Electrical.

ALTHOUGH ALL CARE IS TAKEN IN THE PREPARATION OF THIS ARTWORK,

FINAL RESPONSIBILITY RESTS WITH YOU THE CLIENT.

All graphics specified in this artwork must pass the following adhesion

tests:

1. With the graphics in place on the product, scratch firmly with a finger nail
with an inward action. There should be no sign of damage to the markings.

2. After test 1, a length of scotch brand tape is to be firmly stuck over the
graphics, and rubbed down to ensure maximum adhesion of the tape. Pull
away from the surface at 90o at a constant rate. There should not be any
evidence of the graphic stuck to the tape.

3. After test 2, rub for 15 seconds by hand with a piece of cloth soaked in
water, and again for 15 seconds with a piece of cloth soaked in petroleum
spirit (hexane). After this test, check that markings are easily legible, and
that the graphics cannot be easily removed and show no signs of becoming
detached from the surface to which they are applied.

4. If used for frying/cooking, ink used on this product must be able to
withstand the operating temperature and not dissolved by oil.

SIGNED OFF BY ENGINEERING

SIGNED OFF BY MARKETING

MAGENTA: ARTWORK

GREEN: POSITIONAL

RED: STICKER

SHEET 1

BMO650 Rating - Artwork, Positional, French Translation Sticker

GLOBAL ARTWORK: COLOUR KEY TO SECTIONS

CHECKING NOTE FOR BREVILLE GROUP

Please be sure to check the entire artwork carefully, including:
• Graphics that relate to engineering issues, such as calibration and
functionality of (but not limited to) switches, LED lights, dials, jugs and
vessels, etc.

• Naming and descriptor text, such as wattage graphics, appropriate
description, etc.

• Colour specification that relate to engineering issues, such as identifying
materials to confirm if parts can be sprayed or moulded to match our
swatch, and whether shared tooling will restrict individual parts being
moulded to match our swatch, etc.

GRAPHICS NOTE FOR FACTORY

Factory must use our film, and must not recreate artwork. Factory samples
will not be approved if graphics do not match our artwork. Fonts must be
the same as our artwork, and can not be substituted for other fonts. We will
supply film page in digital copy, in EPS and PDF format. If factory requires
film in another format, please advise. If factory can not use digital film,
please advise and we will forward hard copy via courier.

1-4 (all)

5

1 (all)

1 (all)

1 (all)

PRODUCT GRAPHICS ARTWORK

BMO650-GRT-2019-V3

TBA 19

ISSUE

DATE

115-01-0195

JOB

RETURN TO BREVILLE PTY LTD

HEAD OFFICE
Breville Building, Sydney Corporate Park
Suite 2, 170-180 Bourke Road
NSW, 2016
SYDNEY, AUSTRALIA

A4

NOT TO SCALE

S

1 (all)

S