Zanussi ZHI600S/GB- Manuals

Page 2 - Guide to use the instruction book

2 Thank you for buying a Zanussi product. To enable you to use your appliance effectively and safely, please read this instruction book carefully before usingthe appliance and retain for future reference. If you require guidance in the use of the appliance or require furtherinformation on Zanussi Pr...

Page 3 - IMPORTANT SAFETY INFORMATION; Installation

3 IMPORTANT SAFETY INFORMATION These warnings are provided in the interests of your safety. Ensure that you understand them all beforeinstalling or using this appliance. Your safety is of paramount importance. If you are unsure about any ofthe meanings of these warnings contact the Customer Care Dep...

Page 4 - Cooker Hood Controls

4 YOUR APPLIANCE OPERATING INSTRUCTIONS This cooker hood is designed to extractunpleasant odours from the kitchen, it will notextract steam. To obtain the best performance it is advisableto switch on the hood a few minutes beforeyou start cooking and leave it running forapproximately 15 minutes afte...

Page 6 - MAINTENANCE AND CLEANING; External Cleaning; Synthetic Paper Grease Filter

6 MAINTENANCE AND CLEANING Before carrying out any maintenance orcleaning isolate the cooker hood from themains supply. The cooker hood must be kept clean, as abuild up of grease or fat can be a fire hazard. External Cleaning Wipe the cooker hood frequently with warmsoapy water using a mild detergen...

Page 7 - It must not be washed.; To Remove the Charcoal Filter; Changing the Light Bulb

7 The synthetic paper grease filter cannot becleaned. It must not be washed. Charcoal Filter (for use in recirculationmode) The charcoal filter cannot be cleaned, it should bereplaced approximately every three months or more oftenif the hood is used for more than three hours per day. To Remove the C...

Page 8 - Symptom; The cooker hood will not start; Solution

8 SOMETHING NOT WORKING SERVICE AND SPARE PARTS If, having followed these instructions carefully, your cooker hood fails to work properly please carry outthe following checks. Symptom The cooker hood will not start The cooker hood is not working effectively T h e c o o k e r h o o d h a s s w i t c ...

Page 9 - PEACE OF MIND FOR TWENTY FOUR MONTHS; STANDARD GUARANTEE CONDITIONS; EXCLUSIONS; This Guarantee does not cover:; ZANUSSI EUROPEAN GUARANTEE

9 PEACE OF MIND FOR TWENTY FOUR MONTHS STANDARD GUARANTEE CONDITIONS We, Zanussi Ltd., undertake that if within twenty four months of the date of the purchase this Zanussi built-inappliance or any part there of is proved to be defective by reason only of faulty workmanship or materials, thecompany w...

Page 10 - INSTALLATION INSTRUCTIONS; ELECTRICAL CONNECTIONS; Electrical Requirements

10 INSTALLATION INSTRUCTIONS It is dangerous to alter the specifications or attempt to modify this product in any way. Technical InformationDIMENSIONS HEIGHT: 35 cm WIDTH: 60 cm DEPTH: 27-36 cm DEPTH WITH VISOR OPEN: 54-63 cm WEIGHT GROSS: 13,0 kg NET: 11,0 kg ELECTRICAL SUPPLY: Voltage (50Hz) 220-2...

Page 11 - INSTALLING THE COOKER HOOD; Installation Requirements

11 INSTALLING THE COOKER HOOD Please ensure that when the appliance isinstalled it is easily accessible to anengineer in the event of a breakdown. All installations must comply with the localauthorities requirements for the discharge ofexhaust air. Incorrect installation may affect the safety ofthis...

Page 12 - Clearance Height

12 A: Built-in Electric Hob: 650mm clearance B: Built-in Gas hob: 700mm clearance C: Slot-in Electric Cooker: 685mm clearanceD: Slot-in Gas Cooker: 787mm clearance Hob Clearance Height A clearance height of 650mm (25 1/2 ”) is required wheninstalled above a built-in electric hob, or 700mm (27 1/2”) ...

Page 13 - Recirculation

13 Venting The hood is more effective when used in theextraction setting (ducted to the outside). Venting kits may be purchased throughyour retailer or DIY store, and must beducted to an outside vent of 100mm (4”)minimum. The ducting used must be manufactured fromfire retardant material. When the ho...

Page 15 - Adjustment

15 Failure to align the top edge of the decor panelwith the template will prevent the visor fromopening when installed. 3. Before drilling, use a tape measure to check thedistances of the screw holes (as given on thetemplate). The template may have altered dueto dampness after manufacture. 4. Use th...

Page 16 - Service and Spare Parts

16 In the event of your appliance requiring service, or if you wishto purchase spare parts please contact your local ServiceForce Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to the ServiceForce centre covering your post code area. For the address of your loca...