Zanussi ZHI600S/GB- User Manual

6 MAINTENANCE AND CLEANING Before carrying out any maintenance orcleaning isolate the cooker hood from themains supply. The cooker hood must be kept clean, as abuild up of grease or fat can be a fire hazard. External Cleaning Wipe the cooker hood frequently with warmsoapy water using a mild detergen...

7 The synthetic paper grease filter cannot becleaned. It must not be washed. Charcoal Filter (for use in recirculationmode) The charcoal filter cannot be cleaned, it should bereplaced approximately every three months or more oftenif the hood is used for more than three hours per day. To Remove the C...

8 SOMETHING NOT WORKING SERVICE AND SPARE PARTS If, having followed these instructions carefully, your cooker hood fails to work properly please carry outthe following checks. Symptom The cooker hood will not start The cooker hood is not working effectively T h e c o o k e r h o o d h a s s w i t c ...

9 PEACE OF MIND FOR TWENTY FOUR MONTHS STANDARD GUARANTEE CONDITIONS We, Zanussi Ltd., undertake that if within twenty four months of the date of the purchase this Zanussi built-inappliance or any part there of is proved to be defective by reason only of faulty workmanship or materials, thecompany w...

10 INSTALLATION INSTRUCTIONS It is dangerous to alter the specifications or attempt to modify this product in any way. Technical InformationDIMENSIONS HEIGHT: 35 cm WIDTH: 60 cm DEPTH: 27-36 cm DEPTH WITH VISOR OPEN: 54-63 cm WEIGHT GROSS: 13,0 kg NET: 11,0 kg ELECTRICAL SUPPLY: Voltage (50Hz) 220-2...

11 INSTALLING THE COOKER HOOD Please ensure that when the appliance isinstalled it is easily accessible to anengineer in the event of a breakdown. All installations must comply with the localauthorities requirements for the discharge ofexhaust air. Incorrect installation may affect the safety ofthis...

12 A: Built-in Electric Hob: 650mm clearance B: Built-in Gas hob: 700mm clearance C: Slot-in Electric Cooker: 685mm clearanceD: Slot-in Gas Cooker: 787mm clearance Hob Clearance Height A clearance height of 650mm (25 1/2 ”) is required wheninstalled above a built-in electric hob, or 700mm (27 1/2”) ...

13 Venting The hood is more effective when used in theextraction setting (ducted to the outside). Venting kits may be purchased throughyour retailer or DIY store, and must beducted to an outside vent of 100mm (4”)minimum. The ducting used must be manufactured fromfire retardant material. When the ho...

15 Failure to align the top edge of the decor panelwith the template will prevent the visor fromopening when installed. 3. Before drilling, use a tape measure to check thedistances of the screw holes (as given on thetemplate). The template may have altered dueto dampness after manufacture. 4. Use th...

16 In the event of your appliance requiring service, or if you wishto purchase spare parts please contact your local ServiceForce Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to the ServiceForce centre covering your post code area. For the address of your loca...