York K3EU180A50 - Manuals

York K3EU180A50 – Manual in PDF format online.

Manuals:

Manual York K3EU180A50

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - INSTALLATION

LIMITATIONS These units must be installed in accordance with applicable na-tional, local and municipal safety codes. If components are to be added to a unit to meet local codes,they are to be installed at the dealer's and/or the customer's ex-pense. Refer to Table 2 for Unit Application Data. LOCATI...

Page 3 - WARNING: Provisions for recovering refrigerant releases; Unitary Products Group; FIG 1 - VERTICAL AND HORIZONTAL APPLICATION

VERTICAL/HORIZONTAL INSTALLATION The unit is shipped for vertical installation with a vertical air dis-charge as shown in Figure 1, but may be converted to other ar-rangements per the following instructions. 1. Remove the panels from the blower section. 2. Remove the four Phillips machine bolts that...

Page 4 - DRAIN CONNECTION; FIG 3 - RECOMMENDED DRAIN PIPING

NOTE: To minimize the possibility of system failure due to dirt and moisture, a filter-drier must be installed in each liq-uid line as close to the evaporator as possible. Filter-driers are not supplied with the evaporator blowers.They are supplied with the matching condensing sec-tions. The tempera...

York Manuals