Xerox 610E35560 - Manuals

Page 10 Sending a fax.... or 1 Load the originals using the automatic document feeder or the document glass. 2 Ensure the LCD displays the date and time. If not, press the [Copy/Fax/Scan] Key repeatedly until FAX Mode displays and press [Select]. Copy/Fax/Scan Key 3 Select Fax features, enter the fa...

Page 12 Using ControlCentre 5.0.... When you install Xerox WorkCentre Pro 412 software, Xerox WorkCentre Pro 412 ControlCentre 5.0 utility is automatically installed. Use the following instructions to run ControlCentre 5.0: Click the [ Start] button on your desktop computer. 1 From Programs , select...

Page 14 Safety Notes Your Xerox product and supplies have been designed and tested to meet strict safety requirements. These include Safety Agency approval, and compliance to established environmental standards. Please read the following instructions carefully before operating the product and refer ...

Page 16 Never push objects of any kind into the slots of the product as they may touch dangerous voltage points or short out parts which could result in a fire or electric shock. Never spill liquid of any kind on the product. Never remove covers or guards that require a tool for removal, unless dire...

Page 17 Regulatory Information The CE marking applied to this product symbolizes Xerox Limited Declaration of Conformity with the following applicable Directives of the European Union as of the dates indicated: January 1, 1995: Council Directive 73/23/EEC amended by Council Directive 93/68/EEC, appr...

Page 20 Xerox equipment which has been properly and regularly serviced and maintained should not have to undergo additional specific safety tests pursuant to the 1989 Regulation. Customers wishing to complete safety testing should contact Xerox Limited Technical Centre (see page B22) for advice prio...

Page 21 QUESTION: Is the XEROX equipment in my premises safe? ANSWER: All XEROX equipment supplied by XEROX Limited and their authorized distributors conforms to all relevant safety legislation and standards. However, like all electrical equipment, they have to be regularly serviced and maintained b...

Page 22 QUESTION: I would like to carry out my own safety tests on the XEROX equipment in my premises. ANSWER: You may, of course, request such tests as you deem necessary to satisfy yourself that your XEROX equipment is safe. Your XEROX Limited Customer Support will be pleased to advise you on such...

Page 24 FCC Regulations Send Header Requirements Federal Communications Commission (FCC) regulations require all persons within the United States who send any message via a facsimile machine to include an identifying message in the transmission. The message must clearly contain an identifier and tel...

Page 26 If you find the telephone line is damaged or the telephone company notifies you that your machine is causing damage, disconnect the machine from the telephone line and call for service. Do not reconnect the machine until necessary repairs are made. The telephone company will, where practical...

Page 27 Canadian Certification Notice: The Industry Canada Label on the machine identifies certified equipment. This certification means that the equipment meets certain telecommunications networks protective, operational and safety requirements. Industry Canada does not guarantee the equipment will...

Page 28 Notice: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement t...