Xantech YiAK-K1000-01A - Manuals

Xantech YiAK-K1000-01A – Manual in PDF format online.

Manuals:

Manual Xantech YiAK-K1000-01A

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5

Summary

Page 2 - Power

Important Safety and Installation Information! Wire Separations Low-voltage control wiring systems must always be installed to minimize the possibilityof accidental contact with wiring carrying hazardous voltage. Never place any wiringnear bare power wires or lightning rods, antennas, transformers, ...

Page 3 - Rear Panel Connections; Installation and Connection; Step One – Prepare and Install the Wiring; Figure 1

Rear Panel Connections ¡ Cover Plate Screwholes – After you have completed installation, these screw- holes accept the screws supplied with your Decora-style cover plate to attach it to the KP 1. ™ Mounting Screw Slots – Use the supplied machine screws to attach the KP 1 to an electrical junction bo...

Page 4 - Step Two – Install an Optional IR Sensor; Wiring Chart 2; Step Three – Install the KP 1 In the Wall; Step Four – Connect the KP 1 to the PA 4000; Figure 2

Step Two – Install an Optional IR Sensor If you are installing the optional IR sensor, you also need to prepare the sensor’s ribboncable. The recommended Xantech 490-00 Micro Link comes with a 7-foot long, 3-con-ductor ribbon cable. Trim the ribbon cable to 3 or 4 inches. Strip the wire ends 1 to 1-...

Xantech Manuals