Xantech RC68+ - Manuals

Xantech RC68+ – Manual in PDF format online.

Manuals:

Manual Xantech RC68+

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5

Summary

Page 2 - COMMAND DEFINITIONS; that come with each specific Xantech model.; F r o n t; RC68+ Itemized Functions and Features

2 RC68+  COMMAND DEFINITIONS • For detailed information that defines the button commands relating to each overlay, refer to the Installation Instructions that come with each specific Xantech model. • The only exception to this is for the model ZPR68; complete command definitions for it are included...

Page 4 - CODE GROUP SETTING PROCEDURES; Use these procedures to:; Setting the RC68+ Code Group Number; specific Xantech model.; in the number and the Right switch is the second digit.; Do not connect other Xantech models at this time.; Setting the code switches (68 shown for the ZPR68)

4 RC68+  CODE GROUP SETTING PROCEDURES Use these procedures to: a) Select the Code Group Number on the RC68+ to match the Code Group Number internally preset at the factory for the specific Xantech model you wish to control. b) Change the Internal Code Group Number of a Xantech model. You would do ...

Page 5 - Amplifiers & Preamplifiers; rear; Switches set to; FF; for Code Group changes.

5 Amplifiers & Preamplifiers RC68+  2. Using a small blade screwdriver, rotate each of the two Code Group Setting Switches on the rear of the RC68+ to the F position ( FF ). See Fig. 5 . 3. Turn the remote over and locate a Code Group number that is different than any other Xantech model used i...

Xantech Manuals