Xantech 590-00 - Manuals

 2 590-00 SCREW TERMINALS Opto-Isolator Inputs - 16 pairs of positive and negative terminals, isolated from ground. O - Infrared Output - Positive terminal for the IR output signal. G - Ground - Negative terminal for the IR output signal. The " O " and " G " terminals drive IR emitt...

 3 Controllers 590-00 3. Press and hold down the key for the 590 input into which you wish to store the command. Remember, the " key " may be a contact closure push-button device, such as the Xantech 598 keypad (Fig. 1), or a simple jumper wire, one end connected to the" + " 12VDC t...

 4 short tap for its command to be properly executed, then only a short burst of it should be stored in the 590.Step 4 would, therefore, be modified as follows: 4. Press the key on the remote controller that you wish to store. Hold the key for a very short period oftime or only as long as you usual...