Woods 2104045 - Manuals - manualsarea.com

Page 2 - S a fe t y; INSTALLATION; SAFETY RULES

S a fe t y 2 Loader Mounting Kit SR3 (4/25/2003) INSTALLATION This Loader Mounting Kit is to be used only for the loaders and tractors specified in this manual.Any other use or modification of this mounting kitmay result in serious injury or death. Hydraulics must be connected as instructed in t...

Page 3 - M o u n t I n s ta l l a t i o n; LOADER MOUNT INSTALLATION; NOTICE; WARNING; CAUTION; TRACTOR PREPARATION

M o u n t I n s ta l l a t i o n 3 MAN0807 (6/17/2009) LOADER MOUNT INSTALLATION ■ Only use 2104045 Loader Mounting Kit for mounting Woods LS84 loader on Kubota ® B3200 and B3300SU tractors. Any other use or modifica-tion of this mounting kit may result in seriousinjury or death. Safety instructio...

Page 4 - Attach Right and Left loader Mounts

4 M o u n t I n s ta l l a t i o n MAN0807 (6/17/2009) Attach Right and Left loader Mounts 1. Attach right loader mount (1) to tractor frameusing two cap screws (10) and hardened flatwashers (12) in the forward top holes. 2. Insert cap screw (11) and hardened flat washer(12) in the third and fourth ...

Page 6 - H y d r a u l i c I n s ta l l a t i o n; General Description

H y d r a u l i c I n s ta l l a t i o n 6 MAN0807 (6/17/2009) 1019695 HOSE KIT INSTALLATION Keep hands and body away from pressurized lines. Use paper or cardboard, not hands or otherbody parts to check for leaks. Wear safety goggles.Hydraulic fluid under pressure can easily penetrateskin and wil...

Page 7 - Attach Loader Supply Hoses; Connect Loader Supply Hoses

7 H y d r a u l i c I n s ta l l a t i o n MAN0807 (6/17/2009) Attach Loader Supply Hoses 1. Attach female quick couplers (2) to the loadersupply hoses (1). 2. Attach loader supply hoses to the loader steelfeedlines on the loader boom. See Figure 6. 1. 360220 Hose, 38" x 1/4 NPTM x 9/16 JICM 2. ...

Page 8 - Verify Control Movements

H y d r a u l i c I n s ta l l a t i o n 8 MAN0807 (6/17/2009) Verify Control Movements 1. Mount loader to tractor: Remove mount pins from loader uprights. Align tractor with loader andslowly drive tractor into loader. Shut off tractor. 2. Connect loader feedline hoses to tractor hydrauliccouplers. ...

Page 9 - NOTES

9 H y d r a u l i c I n s ta l l a t i o n MAN0807 (6/17/2009) NOTES

Page 10 - P a r ts

P a r ts 1 0 MAN0807 (6/17/2009) 2104045 LOADER MOUNTING KIT REF PART QTY DESCRIPTION 1 1030978 1 Right Mount 2 1030979 1 Left Mount 3 1030986 1 Center Plate 6 65505 5 12 mm-1.25P x 30 mm HHCS 7 1028293 12 M12-1.75x35 CL10.9 Hex flange screw 8 52177 5 .488 x 1.25 x .134 HT washer 9 1028338 6 M12-1.7...

Page 12 - A p p e n d i x; BOLT TORQUE CHART

A p p e n d i x 1 2 Bolt Torque & Size Charts (Rev. 3/28/2007) BOLT TORQUE CHART Always tighten hardware to these values unless a different torque value or tightening procedure is listed for a specific application. Fasteners must always be replaced with the same grade as specified in the manual ...

Page 13 - BOLT SIZE CHART; SAE Bolt Thread Sizes; MM

Bolt Torque & Size Charts (Rev. 3/28/2007) 1 3 A p p e n d i x BOLT SIZE CHART NOTE: Chart shows bolt thread sizes and corresponding head (wrench) sizes for standard SAE and metric bolts. ABBREVIATIONS AG .............................................................. Agriculture ASABE .............

Page 14 - WARRANTY

F-3079 (Rev. 2/14/2011) Woods Equipment Company 2606 South Illinois Route 2 Post Office Box 1000Oregon, Illinois 61061 USA 800-319-6637 tel800-399-6637 faxwww.WoodsEquipment.com WARRANTY All Models Except Mow’n Machine TM Zero-Turn Mowers Please Enter Information Below and Save for Future Reference....

Page 15 - (Replacement Parts For All Models Except Mow’n Machine; Zero-Turn Mowers and Woods Boundary

F-8494 (Rev. 6/23/2005) WARRANTY (Replacement Parts For All Models Except Mow’n Machine TM Zero-Turn Mowers and Woods Boundary TM Utility Vehicles) Woods Equipment Company (“WOODS”) warrants this product to be free from defect in material andworkmanship for a period of ninety (90) days from the date...