Woods 2100042 - Manuals - manualsarea.com

Page 2 - I n t r o d u c t i o n

2 I n t r o d u c t i o n LMK (Rev. 7/20/2007) TO THE DEALER: Assembly and proper installation of this product is the responsibility of the Woods ® dealer. Read manual instructions and safety rules. Make sure all items on the Dealer’s Pre-Delivery and Delivery Check Lists in the Loader Operator’sMan...

Page 3 - S a f e t y; INSTALLATION; SAFETY RULES

S a f e t y 3 Loader Mounting Kit SR3 (4/25/2003) INSTALLATION This Loader Mounting Kit is to be used only for the loaders and tractors specified in this manual.Any other use or modification of this mounting kitmay result in serious injury or death. Hydraulics must be connected as instructed in ...

Page 4 - M o u n t I n s ta l l a t i o n; LOADER MOUNT INSTALLATION; WARNING; CAUTION; Tractor Preparation

4 M o u n t I n s ta l l a t i o n MAN0728 (8/15/2008) LOADER MOUNT INSTALLATION ■ Only use 2100042 Loader Mounting Kit for mounting Woods LS72 loader on Cub Cadet ® SC2400 tractors. Any other use or modification ofthis mounting kit may result in serious injury ordeath. Safety instructions are imp...

Page 5 - Attach Right and Left Mounts

M o u n t I n s ta l l a t i o n 5 MAN0728 (8/15/2008) Attach Right and Left Mounts 1. Attach right mount (1) to tractor frame using fivecap screws (6) and hardened flat washers (5). NOTE: If tractor is equipped with an undermount mower, attach mower lift stop link (3) over the reartwo mounting hole...

Page 6 - Install Grill Guard

6 M o u n t I n s ta l l a t i o n MAN0728 (8/15/2008) Install Grill Guard 1. Attach grill guard mounting brackets (B) to theright and left sides of the tractor frame. Secure toeach side using two cap screws (C), hardened flatwashers (D), and hex nuts (E). 2. Slide grill guard (A) over outside of mo...

Page 7 - I n s ta l l a t i o n; General Description; Assemble Hoses

I n s ta l l a t i o n 7 MAN0728 (8/15/2008) 1029395 HOSE KIT General Description These instructions are for operating the loader usingthe tractor hydraulic remote control lever. To use thishydraulic connection, the tractor must be equippedwith the manufacturer’s multi-function hydraulic leverand fo...

Page 8 - Connect Hoses

8 I n s ta l l a t i o n MAN07/28 (8/15/2008) Connect Hoses 1. Route hydraulic hoses along loader mount andconnect to tractor hydraulic couplers, locatedunder right side of operator’s platform. See Figure7. 2. Be sure to avoid contact with clutch pedal andother moveable tractor components. NOTE: Hos...

Page 9 - Verify Control Movements

I n s ta l l a t i o n 9 MAN0728 (8/15/2008) Verify Control Movements 1. Mount loader to tractor: Remove mount pins from loader uprights. Align tractor with loader andslowly drive tractor into loader. Shut off tractor. 2. Connect loader feedline hoses to tractor hydraulicremote control hydraulics co...

Page 10 - P a r ts

1 0 P a r ts MAN0728 (8/15/2008) 2100042 LOADER MOUNTING KIT REF PART QTY DESCRIPTION 1 1029390 1 Right mount 2 1029391 1 Left mount 3 1029443 2 Mower lift stop link 4 307429 4 M16 x 2.0P x 55 mm HHCS(used with item 3 only) 5 57817 10 5/8 Hardened flat washer 6 64062 10 M16 x 2.0P x 40 mm HHCS 7 102...

Page 11 - P a rts

P a rts 11 MAN0728 (8/15/2008) 1029395 HOSE KIT REF PART QTY DESCRIPTION 1 1007758 4 Hose, 46" x 9/16 JICM x 9/16 JICF 2 316013 4 Quick coupler, 1/4 3 315061 4 Adapter, 9/19 JICM x 1/4 NPTM 4 395061 1 Plastic spiral band, red (NS) 5 395062 1 Plastic spiral band, blue (NS) 6 56061 1 Plastic spira...

Page 12 - A p p e n d i x; BOLT TORQUE CHART

1 2 A p p e n d i x Bolt Torque & Size Charts (Rev. 3/28/2007) BOLT TORQUE CHART Always tighten hardware to these values unless a different torque value or tightening procedure is listed for a specific application. Fasteners must always be replaced with the same grade as specified in the manual ...

Page 13 - BOLT SIZE CHART; SAE Bolt Thread Sizes; MM

A p p e n d i x 1 3 Bolt Torque & Size Charts (Rev. 3/28/2007) BOLT SIZE CHART NOTE: Chart shows bolt thread sizes and corresponding head (wrench) sizes for standard SAE and metric bolts. ABBREVIATIONS AG .............................................................. Agriculture ASABE .............

Page 14 - WARRANTY

F-3079 (Rev. 5/15/2008) WARRANTY (All Models Except Mow’n Machine TM Zero-Turn Mowers and Woods Boundary TM Utility Vehicles) Please Enter Information Below and Save for Future Reference. Date Purchased: ____________________________ From (Dealer): ___________________________________________ Model Nu...

Page 15 - (Replacement Parts For All Models Except Mow’n Machine

F-8494 (Rev. 6/23/2005) WARRANTY (Replacement Parts For All Models Except Mow’n Machine TM Zero-Turn Mowers and Woods Boundary TM Utility Vehicles) Woods Equipment Company (“WOODS”) warrants this product to be free from defect in material andworkmanship for a period of ninety (90) days from the date...