Winegard RS-1500 - Manuals

Winegard RS-1500 – Manual in PDF format online.

Manuals:

Manual Winegard RS-1500

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - CONNECTING COAX CABLE TO THE ANTENNA; Push the cable up until the end of the connector is; to the right; until the connector is; INSTALLING ANTENNA ON MOUNT; FIGURE 3; Antenna; FIGURE 1; ATTACHING MOUNT TO ROOF; Run cable supplied down through mount; TV

CONNECTING COAX CABLE TO THE ANTENNA 1.Slide small antenna gasket (previously removed fromthe middle of the large mount gasket) onto coax.2.Slide coax cable (with connector installed) into cabletool through the slot in the side of the tool, hex end up,Figure 2. 3. Push the cable up until the end of ...

Page 3 - CONNECTING POWER SUPPLY; Select location for power supply. Run two coax cables; FIGURE 6; CHECKING OPERATION OF POWER SUPPLY; This unit is equipped with a polyswitch; FIGURE 7; FIGURE 8; IMPORTANT

3 CONNECTING POWER SUPPLY 1. Select location for power supply. Run two coax cables (three if Set 2 jack is going to be used) (RG-59 type)between locations and install connectors on each end. Mark cables so "cable input", "TV output" "Set 2"may be identified. Antenna downlead ...

Page 4 - WHAT TO DO WHEN YOUR RV/TV ANTENNA IS NOT WORKING PROPERLY; TO TEST SYSTEM; downlead supplies +12 VDC to preamp in antenna.

Winegard Company • 3000 Kirkwood Street • Burlington, IA 52601 • 319/754-0600 Fax 754-0787 • www.winegard.com Printed in U.S.A. © 2002,2005 Winegard Company 2451233 Rev5 10/10 WHAT TO DO WHEN YOUR RV/TV ANTENNA IS NOT WORKING PROPERLY TO TEST SYSTEM HOW YOUR SYSTEM WORKS WARNING DO NOT install coupl...

Winegard Manuals