Winegard 1000 - Manuals

Follow the steps below to raise the antenna for reflector, bracket, and LNB assembly removal. Pay attention to the pinch points as the antenna raises. See below. Press [POWER] , and hold for two seconds to turn on the TRAV’LER ® interface box. Wait until the interface box finishes “connecting to ant...

If converting a DIRECTV SWM Slimline antenna to a DISH TRAV’LER antenna, remove the power inserter and SWM splitter; these will not be used. Remove the four reflector nuts and bolts, and remove the dish. Set the nuts and bolts aside. Disconnect the coaxial cables from the turret. Note that the D por...

Remove the bolts holding the reflector bracket to the skew housing. NOTE If replacing a Slimline assembly with a DISH assembly , remove and set aside the stiffener plate inside the reflector bracket. Remove the LNB arm assembly, and set aside. NOTE If replacing a Slimline assembly with a DISH assemb...