White Rodgers 1F95-1277 - Manuals

7 OPERATING YOUR THERMOSTAT Choose the Fan Setting (Auto or On or Prog) Fan Auto is the most commonly selected setting and runs the fan only when the heating or cooling system is on.Fan On selection runs the fan continuously for increased air circulation or to allow additional air cleaning.Fan Prog ...

8 Enter the Heating Program 1) Press the Menu button and then press Set Schedule. Press SYSTEM button to select either " Heat " or " Cool " in the system switch area indicating the active mode beingprogrammed. You can switch to the other mode bypressing the system switch at any time....

9 PROGRAMMING Energy Saving Factory Pre-Program The 1F95-1277 thermostats are programmed with the energy saving settings shown in the table below for all days of the week. If this program suits your needs, simply set the thermostat clock and press the RUN button.The table below shows the factory set...

10 PROGRAMMING Wired Remote Temperature Sensing One remote temperature sensor can be installed indoor oroutdoor and connected to the thermostat by a maximumcable length of 100 meters (300 ft). Three terminals, +, S & -are provided on the terminal block to connect to the White-Rodgers standard wi...

11 TROUBLESHOOTING Reset Operation Note : When thermostat is reset, installer configuration menu settings and programming will reset to factory settings. If a voltage spike or static discharge blanks out the display or causes erratic thermostat operation, you can reset the thermostat by removingthe ...