US Stove Company 2421 - Manuals

5 Operation of the Heater BE SURE TO PUT A LAYER OF SAND OR FIREBRICKAPPROXIMATELY 1 1/2" THICK IN THE BOTTOM OF THESTOVE BEFORE STARTING FIRE.Burn wood or wood products only. The wood should be airdried for at least six months prior to use for maximum effi-ciency.After the fire has been started...

CONNECTION OF CHIMNEY CONNECTOR TO A MASONRY CHIMNEY THROUGH A COMBUSTIBLE WALL Figure 8 shows how to connect the chimney connector of a heater to a masonry chimney through a combustible wall. There are five allowable ways that a chimney connector can be connected to a masonry chimney by passing thr...

CONNECTION OF CHIMNEY CONNECTOR TO A MASONRY CHIMNEY WHEN CHINEY CONNECTOR DOES NOT PASS THROUGH A COMBUSTIBLE WALL PART E - (Figure 8)In addition to the methods shown by A, B, C, and D of Figure 8, a listed factory-built wall pass-through systemmay be purchased and installed according to the instru...

CAUTION! NEVER USE GASOLINE, GASOLINE-TYPE LANTERN FUEL, KEROSENE, CHARCOAL LIGHTER FLUID, OR FLAMMABLE LIQUIDS TO START OR "FRESHEN UP" A FIRE IN THE HEATER. CAUTION! USE WOOD OR WOOD-LIKE MATERIALS ONLY. DO NOT USE COAL OR CHARCOAL. COAL OR CHARCOAL WILL DESTROY THE FIREBOX. DO NOT USE DRI...

HOW TO ORDER REPAIR PARTS THIS MANUAL WILL HELP YOU OBTAIN EFFICIENT, DEPENDABLE SERVICE FROMTHE HEATER, AND ENABLE YOU TO ORDER REPAIR PARTS CORRECTLY. KEEP IN A SAFE PLACE FOR FUTURE REFERENCE. WHEN WRITING, ALWAYS GIVE THE FULL MODEL NUMBER WHICH IS ON THENAMEPLATE ATTACHED TO THE BACK OF THE HEA...