Turbo Chef conveyor 1618 - Manuals

Turbo Chef conveyor 1618 – Manual in PDF format online.

Manuals:

Manual

Manual Turbo Chef conveyor 1618

Summary

Page 5 - Table of Contents; Safety Information

Table of Contents Safety Information Important Safety Information - Please Read First i General Safety Information i Reducing Fire Risk ii Preventing Oven Damage ii Grounding Instructions ii Power Cord Replacement ii Specifications and Installation HhC 1618 Dimensions 1 HhC 1618 Electrical Specifica...

Page 7 - Important Safety Information – Please Read First

i SAFETY INFORMATION Important Safety Information – Please Read First Improper installation, adjustment, alteration, service, or maintenance of this equipment can cause property damage, injury, or death. Thoroughly read the installation, operating, and maintenance instructions before installing or s...

Page 8 - ii; SAFETY INFORMATION; Reducing Fire Risk; WARNING: Improper grounding increases the risk of electric shock.; Power Cord Replacement

ii SAFETY INFORMATION Reducing Fire Risk If materials inside the oven ignite or if smoke is observed,1. Turn off the oven.2. Disconnect the power cord or shut off power at the fuse/circuit breaker panel. o Carefully attend the oven if paper, plastic, or other combustible materials are placed inside ...

Page 9 - Exterior; Electrical Specifications; North America; Figure 1: HhC 1618 Oven Dimensions - Side

1 SPECIFICATION AND INSTALLATION HhC 1618 Dimensions Exterior Height 13.0” (330 mm) -- with legs 17.0” (432 mm) Width 36.0” (914 mm) Depth 31.7” (805 mm) Conveyor Length 36.0” (914 mm) or 48” (1219 mm) Width 16.0” (406 mm) Electrical Specifications North America 1 Phase208/240 VAC50/60 Hz37 amp curr...

Page 10 - SPECIFICATION AND INSTALLATION; Height; Conveyor; Length; Figure 1: HhC 2020 Oven Dimensions - Side

2 SPECIFICATION AND INSTALLATION HhC 2020 Dimensions Exterior Height 13.0” (330 mm) -- with legs 17.0” (432 mm) Width 48.3” (1227 mm) Depth 35.7” (907 mm) Conveyor Length 48.3” (1227 mm) Width (Single) 20.0” (508 mm)Width (50/50) 9.5” / 9.5” (241 mm / 241 mm)Width (70/30) 15” / 4” (381 mm / 102 mm) ...

Page 11 - Figure 6: HhC 2620 Oven Dimensions - Side

3 SPECIFICATION AND INSTALLATION 48.3” (1227 mm) 41.7” (1059 mm) 24.0” (610 mm) 4.0” (102 mm) 8.5” (216 mm) 17.0” (432 mm) 41.7” (1059 mm) 4.0” (112 mm) 6.0” (152 mm) 18.4” (467 mm) 60.1” (1527 mm) 6.0” (152 mm) HhC 2620 Dimensions Exterior Height 13.0” (330 mm) -- with legs 17.0” (432 mm) Width 48....

Page 12 - Packaging; of a unit damaged during shipment or storage.; Delivery and Initial Inspection; for more information.

4 SPECIFICATION AND INSTALLATION Packaging All ovens are packaged in a double-wall corrugated box with integrated wooden skids. All international ovens shipped via Air or Less than Container Loads are packaged in wooden crates. Certifications Construction - 430 stainless steel front, top, sides, and...

Page 13 - Installation Near Open Heat Source; Figure 11: Installation Near Open Heat Source

5 SPECIFICATION AND INSTALLATION Proper placement of the oven will enhance long-term operator convenience and satisfactory performance. Be sure to place the oven in an area accessible for proper operation and servicing. The surface on which the oven is placed must be at least 30” (762 mm) deep and c...

Page 14 - CLEANING; Daily Cleaning Instructions; WARNING: DO NOT use a water jet when cleaning the oven.

6 CLEANING = Wash, rinse, sanitize. (Use only TurboChef-approved cleaner, part number 103180). = Completely dry with clean towel. IDLE BACK OFF E M ERGEN C Y S TOP High h Conveyor by TurboChef TM IDLE BACK OFF E M ERGEN C Y S TOP High h Conveyor by TurboChef TM IDLE BACK OFF E M ERGEN C Y S TOP High...

Page 15 - Step 1: Turn the Oven Off; Weekly Cleaning Instructions; number

7 CLEANING WARNING: Always disconnect power before cleaning or servicing oven. IDLE BACK OFF E M ERGEN C Y STOP High h Conveyor by TurboChef TM IDLE BACK OFF E M ERGEN C Y STOP High h Conveyor by TurboChef TM IDLE BACK OFF E M ERGEN C Y STOP High h Conveyor by TurboChef TM COOKING BELT 10:00 BREAKFA...

Page 16 - Step 3: Remove Inner Oven

8 CLEANING 1. 2. 3. 4. 5. Step 3: Remove Inner Oven Components 1 2 2 1 1 2 1 1 2. 4. Step 4: Clean Oven Components 1. 3. 5. 6. 7. Replace filters if damaged or torn.

Page 17 - Step 5: Replace Oven Components; Step 7: Ready the Oven for Use

9 CLEANING 1. 2. 3. 4. Step 5: Replace Oven Components 1 2 2 1 2 6. 7. 8. 9. 5. Latch Step 7: Ready the Oven for Use 1. 2. Step 6: Verify Chain Tension Acceptable - Chain (A) is tight and easily clears crumb tray holder (B) A B Call service to have link removed - Chain (A) is loose and risks contact...

Page 18 - STANDARD OVEN OPERATION; Up and Down Keys; Oven Controls; Emergency Stop Key; damage the oven and shorten its life span.; Figure 12: Oven Controls

10 STANDARD OVEN OPERATION Oven Controls Figure 12. 1. Display The display shows current oven operation and/or user programming information. 2. Soft Keys Six soft keys are on the oven controls, three on the left (L1, L2, L3, where L1 = top) and three on the right (R1, R2, R3, where R1 = top). Use th...

Page 19 - Cooking; Mode 2: Belt Speed Select; Figure 13: Cooking Modes

11 STANDARD O VEN O PERATION Cooking Figure 13. This section explains how to cook a food product by describing the “standard operation” modes through which the oven progresses (Figure 13). -mode 1: Oven Off -mode 2: Belt Speed Select -mode 3: Warming -mode 4: Soaking -mode 5: Cooking -mode 6: Coolin...

Page 21 - Editing a Cooking Profile; Edit; Changing a Cooking Profile Name; L1 to access the name change screen; Figure 14: Cooking Screen

13 STANDARD O VEN O PERATION Editing a Cooking Profile To edit a cooking profile, the oven must be in the cooking mode and the full edit or flex option must be enabled for each option to be edited. For more information on selecting between full edit, rigid, and flex options for each editable setting...

Page 22 - OVEN MODES; Adjusting the Belt Speed

14 OVEN MODES Adjusting the Belt Speed The oven can accommodate either one or two con-veyor belts. The oven will automatically detect the number of conveyor belts installed and display the option to change the speed of each conveyor belt independently. 1. From Figure 14, press the soft key adjacent ...

Page 23 - ODES; CONFIG MENU; Config Mode; facing the front of the oven.; Accessing the Fault Count Screen; The oven will display the number of faults that; Accessing the Setup Mode; Setup Mode

15 O VEN M ODES INSERT SMART CARD PRESS [BACK] TO EXIT SMARTCARD FAULTS CONFIG MENU SETUP TEST MODE Figure 16: Config Mode LOAD FROM CARD SMARTCARD SAVE TO CARD Figure 17: Smart Card Screen Figure 19: Insert Smart Card Screen Figure 18: Loading a Smart Card L1 L2 L3 R1 R2 R3 L1 L2 L3 R1 R2 R3 L1 L2 ...

Page 24 - Figure 24: Info Screen; Changing the Display Temperature; Changing the Speaker Volume; FAULT COUNTS

16 OVEN MODES EC=82F 208V RUN: 65432 HR IDLE: 12345 HR INFO SERIAL_NUMBER SOFTWARE VERSION Figure 24: Info Screen DEGS F BELT L-R EDIT/RIGID/FLEX ENGLISH SETUP MENU VOL 3 INFO Figure 21: Setup Mode Changing the Display Temperature The oven can display the temperature in either Celsius or Fahrenheit ...

Page 25 - TROUBLESHOOTING; Info Screen; Updating the Firmware; Please note that the; Figure 25: Updating Firmware

17 TROUBLESHOOTING Info Screen The info screen (Figure 24, page 16) is used to display the following information in an easy to access place: - Serial number - Electrical compartment temperature - Voltage - Total time the oven has been on - Total time the oven has been idle - Firmware versionTo acces...

Page 26 - Issue; Troubleshooting

18 TROUBLESHOOTING Issue Possible Cause(s) Resolution No power to oven. - Oven is not plugged in. - Main circuit breaker is tripped. - Plug oven in. - Verify wall circuit breaker is on. Reset breaker and then power oven back on. Oven is not warm- ing up properly. - Oven is in the off state. - Oven h...

Page 28 - Replaceable Parts; Part Description

20 TROUBLESHOOTING Replaceable Parts The following is a list of parts that may need replacing during the life of the oven. For more information, please contact TurboChef. (Within North America, call 800.90turbo. Outside North America, call +1 214.379.6000 or your authorized distributor.) Part Descri...

Page 29 - North America Limited Warranty; Equipment that is not installed, operated and

21 NORTH AMERICA LIMITED WARRANTY North America Limited Warranty The Limited Warranty outlined below for the TurboChef conveyor oven (model HhC 1618, HhC 2020, or HhC 2620) is activated upon shipment of your oven. Should you require additional assistance after reviewing the warranty outlined below, ...

Page 30 - NORTH AMERICA LIMITED WARRANTY; Modifications and Repair:

22 NORTH AMERICA LIMITED WARRANTY Modifications and Repair: Equipment that has been modified or altered by persons other than TurboChef or its service agents, or Equipment that has had non-approved devices or connection items attached thereto, is excluded from coverage under this warranty. Repair of...

Page 31 - during periods of Equipment failure or loss of use.

23 NORTH AMERICA LIMITED WARRANTY services not covered under this limited warranty, TurboChef will invoice customer and customer will pay such invoice based on terms of net 10 days. Customer also agrees to pay any cost incurred by TurboChef or its service agent associated with a service agent respon...

Page 32 - INTERNATIONAL LIMITED WARRANTY; International Limited Warranty; to the terms and conditions set forth herein.

24 INTERNATIONAL LIMITED WARRANTY International Limited Warranty This Limited Warranty shall apply to the sales of all TurboChef HhC 1618, HhC 2020, or HhC 2620 Conveyor ovens (the “Equipment”) manufactured by TurboChef Technologies, Inc. (“TurboChef ”), and sold to purchasers outside of the United ...

Page 33 - Warranty Service

25 INTERNATIONAL LIMITED WARRANTY Warranty Service During the Warranty Period, any materially defective Equipment will be repaired or replaced free of charge at TurboChef ’s option provided that: 1. You notify the Authorized Distributor from whom You purchased the Equipment and/or TurboChef as soon ...

Page 35 - This Limited Warranty shall be governed by and construed

27 INTERNATIONAL LIMITED WARRANTY Governing Law, Entire, Agreement: This Limited Warranty shall be governed by and construed according to English law. The application of the United Nations Convention on International Sale of Goods to this Limited Warranty is expressly excluded. This Limited Warranty...

Page 36 - For service or information:; w i t h i n n o r t h a m e r i c a c a l l; Customer Support; o u t s i d e n o r t h a m e r i c a c a l l

Part Number: HCT-4201 / Rev. P / August 2015 Country Code: NA/EU For service or information: w i t h i n n o r t h a m e r i c a c a l l Customer Support at 1-8 0 0 - 9 0 t u r b o or o u t s i d e n o r t h a m e r i c a c a l l +1 214-379-6000 or Your Authorized Distributor TM Global Operations 2 ...