Turbo Chef i5 - Manual - manualsarea.com

Page 5 - Table of Contents

Safety Instructions General Safety Information i Reducing Fire Risk i Grounding Instructions ii Power Cord Replacement ii Precautions to Avoid Possible Exposure to Excessive Microwave Energy ii RF Interference Considerations ii General Oven Information Theory of Operation 1 Certifications 1 Dimensio...

Page 7 - Safety Instructions

i SAFE T Y INSTRUC TIONS SAVE THESE INSTRUCTIONS Safety Instructions Strictly adhere to the following safety precautions to reduce the risk of burns, electric shock, fire, injury, damage tooven or property near oven, or possible exposure to excessive microwave energy. General Safety Information Read...

Page 8 - Grounding Instructions; serviceman install an outlet near the appliance.; Power Cord Replacement; accumulate on sealing surfaces.; RF Interference Considerations; If your equipment experiences interference:; ii

Grounding Instructions This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk ofelectric shock by providing an escape wire for the electric current. This oven is equipped with a cord thathas a grounding wire with a grounding plug, which must be plugg...

Page 9 - Theory of Operation; certified ventless operation.; Certifications; Oven Dimensions; Figure 2: i3 Oven Dimensions; Figure 1: i5 Oven Dimensions

GENER AL OVEN INFORM A TION 31.1” (790 mm) 28.25” (718 mm) 24.3” (618 mm) 25.75” (654 mm) 15.15” (385mm) 2.5” (64 mm) PLUG 28.1” (714 mm) 27.2” (691 mm) Theory of Operation Utilizing TurboChef ’s patented technology to rapidly cook food without compromising quality,the i5 and i3 ovens maximize throu...

Page 10 - Multi Phase; G E N E R A L O V E N I N F O R M AT I O N; Electrical Specifications - i5 Oven; Single Phase

Multi Phase i5 DL (USA) model (i5-9500-14-DL)* 208/240 VAC, 60 Hz, 30 ampsMax Input: 9500/11500 wattsPlug: NEMA 15-30P i5 BD model (i5-9500-16-BD) 220 VAC, 60 Hz, 28 ampsMax Input: 10000 wattsPlug: IEC 309, 4-pin i5 LD model (i5-9500-15-LD) 220 VAC, 60 Hz, 28 ampsMax Input: 10000 wattsPlug: NEMA 15-...

Page 11 - Electrical Specifications - i3 Oven

GENER AL OVEN INFORM A TION 3 Multi Phase i3 DL (USA) model (i3-9500-14-DL)* 208/240 VAC, 60 Hz, 24 ampsMax Input: 8600/9900 wattsPlug: NEMA 15-30P i3 BD model (i3-9500-16-BD) 220 VAC, 60 Hz, 24 ampsMax Input: 9100 wattsPlug: IEC 309, 4-pin i3 LD model (i3-9500-15-LD) 220 VAC, 60 Hz, 24 ampsMax Inpu...

Page 12 - G E N E R A L O V E N I N F O R M AT I O N / I N S TA L L AT I O N; Figure 3: Hand Grip Locations; Oven Construction; Exterior; Installation; Unpacking Instructions; Check cook cavity thoroughly for accessories,; Lifting and Placing the Oven; Position one or more persons on the left and

4 G E N E R A L O V E N I N F O R M AT I O N / I N S TA L L AT I O N Figure 3: Hand Grip Locations Oven Construction Exterior - Two-tone stainless steel front, top, and sides- 304 stainless steel removable grease pan- Ergonomic door handle- Rubber seal for surface mounting- Side handles for lifting ...

Page 13 - Installation Near Open Heat Source; - If the oven is being placed near a grill or stove,; Voltage Selection; Figure 4: Selecting Voltage; Figure 5: Installation Near Open Heat Source

INST ALLA TION 5 Installation Near Open Heat Source See Figure 5. When placing a TurboChef oven near an open heatsource, strictly adhere to the following: - If the oven is being placed near a grill or stove, a divider must exist between the oven and the open heat source, with a minimum of 6” (152 mm...

Page 14 - Figure 6: i5 Oven Cart and Stacking Stand Dimensions; I N S TA L L AT I O N; Optional Installation Items; TurboChef Oven Cart

Figure 6: i5 Oven Cart and Stacking Stand Dimensions 6 I N S TA L L AT I O N 62.7” (1594 mm) (handle) 35.5” (902 mm) (handle) 35.5” (706 mm) 28.6” (726 mm) 1.5” (38 mm) 30.0” (762 mm) 31.5” (800 mm) 32.5” (826 mm) 44.6” (1133 mm) 17.3” (439 mm) 15.8” (401 mm) 20.5” (521 mm) 26.5” (673 mm) 24.3” (617...

Page 15 - Figure 7: i3 Oven Cart and Stacking Stand Dimensions; Daily Maintenance; Supplies and Equipment; : The oven operates at approximately 450°F (232°C) and may cause; attempt to clean the oven until the oven displays “Oven Off.”; : Be sure the oven interior is cool before you remove the wire rack.

INST ALLA TION / M AINTENANCE 59.7” (1516 mm) (handle) 32.5” (826 mm) (handle) 35.5” (706 mm) 28.6” (726 mm) 4.5” (114 mm) 30.0” (762 mm) 31.5” (800 mm) 32.5” (826 mm) 44.6” (1133 mm) 17.3” (439 mm) 15.8” (401 mm) 20.5” (521 mm) 26.5” (673 mm) 21.25” (540 mm) Figure 7: i3 Oven Cart and Stacking Stan...

Page 16 - M A I N T E N A N C E; Step

8 M A I N T E N A N C E Step 3: Remove and Clean the Lower Jetplate - Unscrew the two thumb screws on the lower jetplate.- Lift the lower jetplate by gripping the thumb screws.- Remove the lower jetplate.- Wash, rinse, and sanitize the lower jetplate. CAUTION : DO NOT remove the top ceramic jetplate...

Page 18 - Oven Controls; return to the previous screen.; press to navigate between screen 1 and 2.; Figure 8: Oven Controls; O V E N C O N T R O L S

Oven Controls 1. Info Key When the oven is off or cooling down, press toaccess the INFO MODE (see page 14). 2. On/Off Key Press to turn the oven on (begin warmup) or off(cool down), or to exit INFO MODE (page 14). 3. Display The display shows information relevant to the current oven operation and/or...

Page 19 - To select a temperature, press the adjacent soft key.; Step 1: Turn the Oven On; Press the On/Off key to turn the oven on.; Cooking; The oven will not cook unless settings are present.; Figure 10: Cook Temperature Select

C OOKING Step 3: Warming Up During this step, the oven warms to the selected or pre-set temperature. Step 2: Select Cook Temperature The oven stores two different cook temperature settings (see page 17 for more information). Each temperature setting has 10 food groups assignedto it, each consisting ...

Page 20 - Step 6: Adjusting the Time; If the “Adjust Time” screen appears, change the cook time (if; Step 5: Ready to Cook; WARNING: Inside of oven and oven door are hot! Use extreme caution.; C O O K I N G; Figure 13: Group Select; Figure 14: Item Select

Step 6: Adjusting the Time The Adjust Time option is turned off by default. If you want the ability to modify the cook time before each cook cycle, this feature can be turned on from the “Options” screen (see page 15). 1. If the “Adjust Time” screen appears, change the cook time (if required) using ...

Page 21 - Figure 17: Cooking Done; Step 9: Cook More Option; Figure 19: Cooling Down

C OOKING Step 8: Remove Food from Oven WARNING: Dish and inside of oven/oven door are hot! Use extreme caution. Open the oven door and check/remove food. 13 Figure 17: Cooking Done Step 9: Cook More Option The “Additional Cooking Options” screen is turned off by default. If you want the ability to c...

Page 22 - T H E I N F O M O D E; Overview of the Info Mode; Figure 20: Info Mode Screen 1; Figure 23: Fault Detail; Figure 24: Options Screen

T H E I N F O M O D E 14 Overview of the Info Mode The INFO MODE serves four main purposes: 1. To display general oven information. 2. To provide access to TEST MODE and additional diagnostic tools for service technicians. 3. To turn oven options and features on/off. 4. To update oven settings. To a...

Page 23 - THE INFO MODE; smart card

THE INFO MODE 15 Viewing the Fault Log From the INFO MODE (Figure 20), press the R3 soft key to view the fault log (Figure 22). To view adetailed log of each fault occurrence (Figure 23),press the soft key adjacent to the fault code. Viewing the Service Numbers From the INFO MODE (Figure 20), press ...

Page 24 - Making a Copy of the Oven Menu; Updating the Oven Firmware; Figure 27: Load Menu Screen

16 Making a Copy of the Oven Menu To save a copy of the oven menu to a smart card , 1. Insert the smart card (Figure 26). 2. Press the L2 soft key (Figure 27). 3. Verify the oven beeps and reads “FINISHED”. To save a copy of the oven menu to a USB drive , 1. Insert the USB drive (Figure 26). 2. Pres...

Page 25 - THE EDIT MODE; Overview of the Edit Mode; Changing Set Temperatures; The set temperature should never be; Figure 29: Temperature Edit Screen

THE EDIT MODE 17 Overview of the Edit Mode The EDIT MODE serves three main purposes: 1. To edit cook temperatures. 2. To edit names of food groups and items. 3. To edit food item settings. To access the EDIT MODE , 1. Enable it from the “Options” screen (page 15). 2. Press the On/Off key to return t...

Page 26 - T H E E D I T M O D E; Changing Food Group/Recipe Name; Changing Recipe Settings; Figure 31: Select Item to Edit; Figure 30: Select Food Group

18 T H E E D I T M O D E Changing Food Group/Recipe Name To change a food group or recipe name,1. Place the oven in EDIT MODE (see page 17). 2. Select a “block” of food groups by pressing the corresponding right-side soft key (Figure 29, page 17). 3. Select the group that contains the item(s) you wa...

Page 27 - Troubleshooting; I s s u e

TROUBLESHOO TING 19 Troubleshooting The following is a list of fault codes and error messages, along with the possible problem(s) that the ovenmay be experiencing. Please attempt the recommended action before calling Customer Support(800.90TURBO, +1 214.379.6000) or your Authorized Distributor. NOTE...

Page 29 - North America Limited Warranty; TurboChef “i5” and “i3” Rapid Cook Oven – North America; Improper Installation, Operation or Maintenance:

NOR TH AMERICA LIMITED WARR ANT Y 21 North America Limited Warranty TurboChef “i5” and “i3” Rapid Cook Oven – North America The TurboChef rapid cook oven Limited Warranty outlined below is activated upon shipment of your oven. Should you requireadditional assistance after reviewing the warranty outl...

Page 30 - N O R T H A M E R I C A L I M I T E D W A R R A N T Y

22 N O R T H A M E R I C A L I M I T E D W A R R A N T Y Warranty Service, Exclusive Remedy TurboChef will be solely responsible for determining whether or not the Equipment or any component thereof is defective.Defective components covered by this warranty will be repaired or replaced at TurboChef ...

Page 31 - International Limited Warranty; Limited Warranty

INTERNA TIONAL LIMITED WARR ANT Y 23 International Limited Warranty This Limited Warranty shall apply to the sales of all TurboChef “i5” and “i3” Series ovens (the “Equipment”) manufactured by TurboChef Technologies, Inc. (“TurboChef ”), and sold to purchasers outside of the United States,Canada, Pu...

Page 32 - I N T E R N AT I O N A L L I M I T E D W A R R A N T Y; and

24 I N T E R N AT I O N A L L I M I T E D W A R R A N T Y 6. You have not used any non-approved devices, accessories, consumables or parts in conjunction with the Equipment; and 7. Repairs, modifications or alterations have not been attempted other than by TurboChef, an Authorized Distributor or its...

Page 34 - For service or information:; T U R B O

For service or information: W I T H I N N O R T H A M E R I C A C A L L Customer Support at 8 0 0 . 9 0 T U R B O O U T S I D E N O R T H A M E R I C A C A L L +1 214.379.6000 or Your Authorized Distributor Part Number: i5-9227 / Revision F / May 2009Country Code: NA/EU TM Global Operations 4 2 4 0 ...

Turbo Chef i5 - Manual

Table of Contents:

Summary

Other Turbo Chef Models