Texas Instruments TUSB3210 - Manuals

Page 5 - Preface; Read This First; About This Manual

Related Documentation From Texas Instruments v Preface Read This First About This Manual This user’s guide describes the setup and operation of the TUSB3210 genericevaluation board. Familiarity with universal serial bus (USB) protocol andcommon laboratory testing equipment is required and assumed th...

Page 6 - Trademarks; FCC Warning

Trademarks vi Trademarks MacOS is a trademark of Apple Computer, Inc. Windows and Windows ME are trademarks of Microsoft Corporation. Other trademarks are the property of their respective owners FCC Warning This equipment is intended for use in a laboratory test environment only. It gen-erates, uses...

Page 7 - Contents; Hardware and Software Required; Figures

Contents vii Contents 1 Hardware and Software Required 1-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Equipment 1-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 9 - Topic; Chapter 1

1-1 Chapter Title—Attribute Reference Hardware and Software Required The TUSB3210 generic EVM is designed for use with a personal computerrunning a USB-enabled operating system. The PC should be USB 1.1specification compliant. This implies that the BIOS, chipsets, and operatingsystem are all USB 1.1...

Page 10 - Figure 1; Hardware Overview

Running Title—Attribute Reference 1-2 1.1 Equipment Figure 1 − 1. TUSB3210 Evaluation Equipment USB EVM 1.2 Hardware Overview The TUSB3210 EVM hardware platform is 11 cm wide by 13 cm long.Throughout this document, text inside of parenthesis (ex.) denotes referencedesignators found on the TUSB3210 E...

Page 14 - Bill of Materials

Running Title—Attribute Reference 1-6 1.3 Bill of Materials Item Quantity Reference Part 1 3 (REV 1.1 board) C1, C4, C10 Capacitor, 0.1 µ F 1 7 (REV 1.2 board) C1, C4, C9, C10, C12, C13, C14 Capacitor, 0.1 µ F 2 2 C2, C5 Capacitor, 4.7 µ F 3 1 C3 Capacitor, 10 µ F 4 3 C6, C7, C8 Capacitor, 22 pF 5 5...

Page 15 - Schematic Diagram

Running Title—Attribute Reference 1-7 Chapter Title—Attribute Reference 1.4 Schematic Diagram The complete schematic diagram of the TUSB3210 generic EVM is presentedat the end of this document.

Page 17 - EVM Operation; Chapter 2

2-1 Chapter Title—Attribute Reference EVM Operation This chapter describes the operation of the TUSB3210 EVM. Topic Page 2.1 TUSB3210 Setup 2-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Interfaces and USB Port 2-2 . . . . . . . . . . . . . . . . ...

Page 18 - Power Supplies; Table 2

Running Title—Attribute Reference 2-2 2.1 TUSB3210 Setup The TUSB3210 EVM supports many USB applications. The jumpers allow theflexibility to configure the EVM in various modes for evaluation purposes. Notethat some modes require additional components not included with the EVM kit.The EVM comes in a...

Page 19 - EEPROM; GPIO Connector

Running Title—Attribute Reference 2-3 Chapter Title—Attribute Reference 2.5 Jumpers and Switches Table 2 − 2 is provided to help set up and configure the EVM platform jumpers to the desired mode of operation. The EVM can download firmware code fromthe PC through a loading program (which may or may n...

Page 20 - Figure 2

Running Title—Attribute Reference 2-4 Figure 2 − 1. GPIO Connector 13 5 7 9 11 1315 1719 21 2325 2729 31 33 353739 41 43 45 4749 P0.0 P0.2 P0.4 P0.6P1.0 P1.2P1.4 P1.6 P2.0 P2.2 P2.4 P2.6 P3.0P3.2P3.4 P3.6 S2BSSCL1 SUSP RST 3.3 V5 VGND GND 2 46 8 101214 16 18 20 2224 2628 3032 34 363840 4244 46 4850 ...