Star Micronics TCP2000 Series - Manuals

Page 3 - HANDLING NOTES

1 HANDLING NOTES At the installation: 1) Install the TCP100/2000 reader/writer on a flat surface. Minimize any shock or vibration to the reader/writer, as shock or vibration may causeinjury and/or failure. 2) Keep the TCP100/2000 reader/writer away from hands of the children.3) Do not use or leave t...

Page 4 - During the operation:

2 During the operation: 1) Do not use any other card but specified by Star Micronics Co., Ltd. It may cause malfunction, failure, etc. 2) Do not use wet or oily stained card. Do not touch card with wet or stained hand. It may cause malfunction, failure, etc. If the card getsstained, please perform c...

Page 6 - OUTLINE

4 OUTLINE The TCP100/2000 series is a reading/writing device for specified IC card orreading device for ISO magnetic stripe type card.It also has print/erase capability to human readable area on the surface of thecard. This series is compatible with most host computers and various P.O.S.systems.(TCP...

Page 7 - UNPACKING

5 2 5 4 3 1 UNPACKING After unpacking the unit, check that all the accessories are included in theindividual box. Housed unit (TCP100/2000 series) 1 TCP100/2000 unit 2 Power cable 3 Cleaning cards (2 pcs) 4 Cleaning liquid 5 Installation Guide & Specifications(this manual) 3

Page 8 - APPEARANCE AND NOMENCLATURE

6 0 6 1 5 4 8 3 7 2 0 A 8 7 9 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ APPEARANCE AND NOMENCLATURE Housed unit TCP100/2000 series [TCP100] [TCP2000 back] 1 Switch Cover This cover protects the po...

Page 9 - CONNECTION TO EXTERNAL UNITS AND SETTING

7 CONNECTION TO EXTERNAL UNITS AND SETTING (Housed unit TCP100/2000 series) <Connecting the interface cable> 1 Turn OFF the power of the host computer and the reader/writer. 2 Plug in an end of the interface cable to the reader/writer connector andthe other end to the serial port of the host c...

Page 10 - CLEANING; -1 Using the cleaning card

8 Cleaning switch Front cover ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ CLEANING 6-1 Using the cleaning card Two cleaning cards and one bottle of cleaning liquid for cleaning the mag-netic head, r...

Page 11 - TROUBLE SHOOTING

9 TROUBLE SHOOTING Difficulties when the power is turned ON. Symptom Possible cause Remedy Power LED lamp does notlight up. Power LED lamp light up. Card is not accepted Card is accepted Card is not accepted Card is accepted, but main unit does no t properly run. Power cable is not properly plugged ...

Page 12 - GENERAL SPECIFICATIONS

10 TCP100 TCP2000 Card type PVC (thick card) PET (thin card) Card feeding part Driving method Feed roller Card inserting Face up in one direction directionCard feed speed 350mm/s (high speed) 350mm/s (high speed) 40mm/s (low speed) 30mm/s (low speed) Magnetic recording part ISO Track 1,2 : read ISO ...