Star Micronics Line Thermal/Dot Printer - Manual

Page 2 - Contents

Contents 1. GENERAL DESCRIPTION 1-1 2. COMMAND FUNCTION LIST 2-1 3. COMMAND DETAILS 3-1 3-1) Explanation of Terms 3-1 3-2) Exception processing 3-2 3-3) Standard Command Details 3-3 3-3-1) Font style and character set 3-3 ESC RS F n 3-3 ESC GS t n 3-4 ESC GS = n1 n2 da1 da2 … dak db1 db2 … dbk 3-5 E...

Page 6 - STAR LIne Mode Command Specifications; GENERAL DESCRIPTION; • Hybrid printers

Rev. 0.00 1-1 STAR LIne Mode Command Specifications 1. GENERAL DESCRIPTION This specifications document describes the command specifications for the STAR MODE on hybrid printers. Information contained herein applies to models with the following conditions. • Hybrid printers • Interfaces: - Parallel ...

Page 7 - COMMAND FUNCTION LIST; • Standard Commands; Define n/72 inch pitch line feed

Rev. 0.00 2-1 STAR LIne Mode Command Specifications 2. COMMAND FUNCTION LIST • Standard Commands Class Commands Name Thermal Slip, Validation Font style ESC RS F Select font - and character set ESC GS t Select code page ← ESC GS = Write blank code page data ← ESC R Specify international character se...

Page 8 - Class

Rev. 0.00 2-2 STAR LIne Mode Command Specifications Class Commands Name Thermal Slip, Validation Page control FF Form feed - ESC C Set page length to n lines - ESC C 0 Set page length in n x 24 mm units - VT Feed paper to vertical tab position - ESC B Set vertical tab position - Horizontal direction...

Page 10 - • Raster Related Commands; Discard specified byte count of; • Black Mark Related Commands

Rev. 0.00 2-4 STAR LIne Mode Command Specifications • Raster Related Commands Class Commands Name Thermal Slip, Validation Raster commands ESC * r R Initialize raster mode - ESC * r A Enter raster mode - ESC * r B Quit raster mode - ESC * r C Clear raster data - ESC * r D Drawer drive - ESC * r E Se...

Page 11 - • Mark Commands

Rev. 0.00 2-5 STAR LIne Mode Command Specifications • Mark Commands Class Commands Name Thermal Slip, Validation Mark Commands ESC GS * 0 Print mark - ESC GS * 1 Specify mark height and line feed - ESC GS * 2 At each mark number Specify mark color, mark horizontal width - ESC GS * W Register mark fo...

Page 13 - STAR Line Mode Command Specifications; Base Line; Bar Code

Rev. 0.00 3-1 STAR Line Mode Command Specifications 3. COMMAND DETAILS 3-1) Explanation of Terms • Reception buffer The buffer for storing data (reception data) received from the host, as it is called the reception buffer. Reception data is temporarily stored in the reception buffer, then processed ...

Page 15 - ESC RS F n

Rev. 0.00 3-3 STAR Line Mode Command Specifications 3-3) Standard Command Details 3-3-1) Font style and character set ESC RS F n [Name] Select font [Code] ASCII ESC RS F n Hexadecimal 1B 1E 46 n Decimal 27 30 70 n [Defined Area] Thermal : 0 ≤ n ≤ 1, n = 16 Slip : - Validation : - [Initial Value] The...

Page 16 - ESC GS t n; Specifies code page

Rev. 0.00 3-4 STAR LIne Mode Command Specifications ESC GS t n [Name] Select code page[Code] ASCII ESC GS t n Hexadecimal 1B 1D 74 n Decimal 27 29 116 n [Defined Area] Thermal : 0 ≤ n ≤ 21, 32 ≤ n ≤ 34, 64 ≤ n ≤ 79, n = 255 Slip : 0 ≤ n ≤ 21, 32 ≤ n ≤ 34, 64 ≤ n ≤ 79, n = 255 Validation : 0 ≤ n ≤ 21...

Page 17 - ESC GS = n1 n2 da1 da2 ... dak db1 db2 ... dbk; A blank code page can be selected using the ESC GS t n command n = 255.

Rev. 0.00 3-5 STAR Line Mode Command Specifications ESC GS = n1 n2 da1 da2 … dak db1 db2 … dbk [Name] Write blank code page data[Code] ASCII ESC GS = n1 n2 da1 da2 .. dak db1 db2 .. dbk Hexadecimal 1B 1D 3D n1 n2 da1 da2 .. dak db1 db2 .. dbk Decimal 27 29 61 n1 n2 da1 da2 .. dak db1 db2 .. dbk [Def...

Page 18 - ESC R n; Specifies international characters

Rev. 0.00 3-6 STAR LIne Mode Command Specifications ESC R n [Name] Specify international character set[Code] ASCII ESC R n Hexadecimal 1B 52 n Decimal 27 82 n [Defined Area] Thermal : 0 ≤ n ≤ 14, n = 64, 48 ≤ N ≤ 57 (”0” ≤ n ≤ “9”), 65 ≤ n ≤ 69 (”A” ≤ n ≤ “E”) Slip : 0 ≤ n ≤ 14, n = 64, 48 ≤ N ≤ 57 ...

Page 19 - normal zeros will be printed.; ESC SP n; Specifies the right space for ANK 12 x 24 dot fonts in n dots.; validation page mode is selected.

Rev. 0.00 3-7 STAR Line Mode Command Specifications ESC / N [Name] Specify/cancel slash zero[Code] ASCII ESC / n Hexadecimal 1B 2F n Decimal 27 47 n [Defined Area] Thermal : n = 0, 1, 48, 49 Slip : n = 0, 1, 48, 49 Validation : n = 0, 1, 48, 49 [Initial Value] Thermal : Memory switch setting Slip : ...

Page 20 - ESC M; Specifies the right space for ANK 12 x 24 dot fonts in 0 dots.; ESC P; Specifies the right space for ANK 12 x 24 dot fonts in 3 dots.; (Note) The settings by this command are valid for all stations.

Rev. 0.00 3-8 STAR LIne Mode Command Specifications ESC M [Name] (Thermal) Specify 12 dot pitch/(Slip) specify 7 x 9 font (half dots) (default) [Code] ASCII ESC M Hexadecimal 1B 4D Decimal 27 77 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : Memory switch setting Slip :...

Page 21 - ESC g; Specifies rights space for the ANK 12 x 24 dot fonts to 2 dots.

Rev. 0.00 3-9 STAR Line Mode Command Specifications ESC : [Name] (Thermal) Specify 16 dot pitch/(Slip) specify 5 x 9 font (3P-1) [Code] ASCII ESC : Hexadecimal 1B 3A Decimal 27 58 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : Memory switch setting Slip : - Validation :...

Page 24 - ESC W n; Setting more than triple is valid after switching to thermal.

Rev. 0.00 3-12 STAR LIne Mode Command Specifications ESC W n [Name] Specify/cancel expanded wide[Code] ASCII ESC W n Hexadecimal 1B 57 n Decimal 27 87 n [Defined Area] Thermal : 0 ≤ n ≤ 5, 48 ≤ n ≤ 53, (“0” ≤ n ≤ “5”) Slip : 0 ≤ n ≤ 5, 48 ≤ n ≤ 53, (“0” ≤ n ≤ “5”) Validation : 0 ≤ n ≤ 5, 48 ≤ n ≤ 53...

Page 25 - ESC h n; x 12 IBM block graphic characters, without expanding characters.

Rev. 0.00 3-13 STAR Line Mode Command Specifications ESC h n [Name] Specify/cancel expanded high[Code] ASCII ESC h n Hexadecimal 1B 68 n Decimal 27 104 n [Defined Area] Thermal : 0 ≤ n ≤ 5, 48 ≤ n ≤ 53, (“0” ≤ n ≤ “5”) Slip : 0 ≤ n ≤ 5, 48 ≤ n ≤ 53, (“0” ≤ n ≤ “5”) Validation : 0 ≤ n ≤ 5, 48 ≤ n ≤ 5...

Page 26 - SO; Specifies double wide for ANK characters and Kanji characters.

Rev. 0.00 3-14 STAR LIne Mode Command Specifications SO [Name] Set double wide[Code] ASCII SO Hexadecimal 0E Decimal 14 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : Cancels 2x wide expansion Slip : Cancels 2x wide expansion Validation : Cancels 2x wide expansion [Func...

Page 27 - ESC SO; Specifies double high for ANK characters and Kanji characters.; ESC DC4; • Double high specifying command (ESC SO)

Rev. 0.00 3-15 STAR Line Mode Command Specifications ESC SO [Name] Set double high[Code] ASCII ESC SO Hexadecimal 1B 0E Decimal 27 14 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : Double high expansion cancelled. Slip : Double high expansion cancelled. Validation : Dou...

Page 28 - ESC E; Specifies emphasized printing for ANK characters.

Rev. 0.00 3-16 STAR LIne Mode Command Specifications 3-3-3) Print mode ESC E [Name] Select emphasized printing[Code] ASCII ESC E Hexadecimal 1B 45 Decimal 27 69 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : Emphasized printing cancelled. Slip : Emphasized printing canc...

Page 29 - ESC F; Cancels emphasized printing for ANK characters.

Rev. 0.00 3-17 STAR Line Mode Command Specifications ESC F [Name] Cancel emphasized printing[Code] ASCII ESC F Hexadecimal 1B 46 Decimal 27 70 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : Emphasized printing cancelled. Slip : Emphasized printing cancelled. Validation ...

Page 30 - ESC – n; Specifies/cancels underline according to n value.; Underlines are valid for white/black inversion.

Rev. 0.00 3-18 STAR LIne Mode Command Specifications ESC – n [Name] Specify/cancel underling mode[Code] ASCII ESC - n Hexadecimal 1B 2D n Decimal 27 45 n [Defined Area] Thermal : n = 0, 1, 48, 49 Slip : n = 0, 1, 48, 49 Validation : n = 0, 1, 48, 49 [Initial Value] Thermal : n = 0 (Underline cancell...

Page 31 - Upperlines are valid for white/black inversion.; dot of the character.

Rev. 0.00 3-19 STAR Line Mode Command Specifications ESC _ n [Name] Specify/cancel upperline [Code] ASCII ESC _ n Hexadecimal 1B 5F n Decimal 27 95 n [Defined Area] Thermal : n = 0, 1, 48, 49 Slip : n = 0, 1, 48, 49 Validation : n = 0, 1, 48, 49 [Initial Value] Thermal : n = 0 (Upperline cancelled) ...

Page 32 - switch, see the printer specifications manual.; switch, see the printer specifications manual.

Rev. 0.00 3-20 STAR LIne Mode Command Specifications ESC 4 [Name] (Thermal) Specify black/white inversion/(Slip) specify black/white inversion, red/black color ( substitute function ) [Code] ASCII ESC 4 Hexadecimal 1B 34 Decimal 27 52 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value...

Page 33 - ESC GS 4 m n; Only setting is valid

Rev. 0.00 3-21 STAR Line Mode Command Specifications ESC GS 4 m n [Name] Select red/black substitute function [ESC 4/5 setting][Code] ASCII ESC GS 4 m n Hexadecimal 1B 1D 34 m n Decimal 27 29 52 m n [Defined Area] Thermal : - Slip : m = 1, 2, 49, 50 When m = 1, 49 (“1”) : n = 0 to 3, 255 When m = 2,...

Page 34 - The following is an example of each setting.

Rev. 0.00 3-22 STAR LIne Mode Command Specifications Precautions for selecting <Option 1> 1. Prints white/black inverted characters using 5 x 9 fonts regardless of the current font size setting. 2. Inserts a one dot string of black printing to the head of the white/black inverted characters. 3...

Page 36 - ESC RS i n

Rev. 0.00 3-24 STAR LIne Mode Command Specifications ESC RS i n [Name] Specify/cancel character rotated mode[Code] ASCII ESC RS i n Hexadecimal 1B 1E 69 n Decimal 27 30 105 n [Defined Area] Thermal : - Slip : 0 ≤ n ≤ 2, 48 ≤ n ≤ 50, (“0” ≤ n ≤ “2”) Validation : 0 ≤ n ≤ 2, 48 ≤ n ≤ 50, (“0” ≤ n ≤ “2”...

Page 37 - LF; Feeds the currently specified amount of paper.; CR; Specifies the function according to the memory switch value.

Rev. 0.00 3-25 STAR Line Mode Command Specifications 3-3-4) Line Spacing LF [Name] Line feed[Code] ASCII LF Hexadecimal 0A Decimal 10 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : Memory switch setting Slip : 1/6 inch line feed Validation : 1/6 inch line feed [Function...

Page 38 - ESC a n; Executes paper feed of (currently specified line feed amount x n).

Rev. 0.00 3-26 STAR LIne Mode Command Specifications ESC a n [Name] Feed paper n lines[Code] ASCII ESC a n Hexadecimal 1B 61 n Decimal 27 97 n [Defined Area] Thermal : 1 ≤ n ≤ 127 Slip : 1 ≤ n ≤ 127 Validation : 1 ≤ n ≤ 127 [Initial Value] Thermal : Memory switch setting Slip : 1/6 inch Validation :...

Page 39 - ESC z n; Specifies the line feed amount.; Specifies the line feed amount to 3 mm.

Rev. 0.00 3-27 STAR Line Mode Command Specifications ESC z n [Name] Select line feed amount[Code] ASCII ESC z n Hexadecimal 1B 7A n Decimal 27 122 n [Defined Area] Thermal : n = 1, 49 Slip : n = 0, 1, n = 48, 49 Validation : n = 0, 1, n = 48, 49 [Initial Value] Thermal : Memory switch setting Slip :...

Page 40 - ESC J n; If print data exists in the line buffer, it prints that data.

Rev. 0.00 3-28 STAR LIne Mode Command Specifications ESC 1 [Name] (Thermal) Specify 3 mm line feed amount/(Slip) specify 7/72 inch line feed amount [Code] ASCII ESC 1 Hexadecimal 1B 31 Decimal 27 49 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : Memory switch setting Sl...

Page 41 - ESC j n; Three bytes ignored; ESC I n; Executes paper feed.

Rev. 0.00 3-29 STAR Line Mode Command Specifications ESC j n [Name] Reverse paper feed[Code] ASCII ESC j n Hexadecimal 1B 6A n Decimal 27 106 n [Defined Area] Thermal : - Slip : 0 ≤ n ≤ 255 Validation : 0 ≤ n ≤ 255 [Initial Value] Thermal : - Slip : - Validation : - [Function] <Thermal> Three ...

Page 42 - ESC A n; Defines the line feed amount.; Defines line feed amount for one line as n/72 inch.

Rev. 0.00 3-30 STAR LIne Mode Command Specifications ESC A n [Name] Defines (thermal) a 3 mm/4 mm line feed amount/Defines (slip) n/72 inch pitch line feed [Code] ASCII ESC A n Hexadecimal 1B 41 n Decimal 27 65 n [Defined Area] Thermal : 0 ≤ n ≤ 255 Slip : 0 ≤ n ≤ 85 Validation : 0 ≤ n ≤ 85 [Initial...

Page 43 - ESC 3 n; ESC y n

Rev. 0.00 3-31 STAR Line Mode Command Specifications ESC 3 n [Name] Specify n/216 inch paper feed [Code] ASCII ESC 3 n Hexadecimal 1B 33 n Decimal 27 51 n [Defined Area] Thermal : - Slip : 0 ≤ n ≤ 255 Validation : 0 ≤ n ≤ 255 [Initial Value] Thermal : - Slip : 1/6 inch line feed Validation : 1/6 inc...

Page 44 - FF; Executes a form feed.

Rev. 0.00 3-32 STAR LIne Mode Command Specifications 3-3-5) Page Control Commands FF [Name] Form feed[Code] ASCII FF Hexadecimal 0CDecimal 12 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : - [Function] <Thermal> Executes a form feed. If the...

Page 45 - ESC C n; • Error cancel operations:

Rev. 0.00 3-33 STAR Line Mode Command Specifications ESC C n [Name] Set page length to n lines[Code] ASCII ESC C n Hexadecimal 1B 43 n Decimal 27 67 n [Defined Area] Thermal : 1 ≤ n ≤ 127 Slip : - Validation : - [Initial Value] Thermal : (Form feed amount initial value x 42) Slip : - Validation : - ...

Page 46 - ESC C 0 n

Rev. 0.00 3-34 STAR LIne Mode Command Specifications ESC C 0 n [Name] Set n x 24 mm page length [Code] ASCII ESC C 0 n Hexadecimal 1B 43 00 n Decimal 27 67 0 n [Defined Area] Thermal : 1 ≤ n ≤ 22 Slip : - Validation : - [Initial Value] Thermal : (Form feed amount initial value x 42) Slip : - Validat...

Page 47 - VT

Rev. 0.00 3-35 STAR Line Mode Command Specifications VT [Name] Feed paper to vertical tab position[Code] ASCII VT Hexadecimal 0BDecimal 11 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : - [Function] <Thermal> Feeds paper to the next vertica...

Page 48 - ESC B n1 n2 ... nk NUL

Rev. 0.00 3-36 STAR LIne Mode Command Specifications ESC B n1 n2 … nk NUL [Name] Set vertical tab position[Code] ASCII ESC B n1 n2 .. nk NUL Hexadecimal 1B 42 n1 n2 .. nk 00 Decimal 27 66 n1 n2 .. nk 0 [Defined Area] Thermal : 1 ≤ n ≤ 255, 0 ≤ n ≤ 16 Slip : - Validation : - [Initial Value] Thermal :...

Page 49 - ESC l n; Setting this command partway will take affect from the next line.; Right Margin

Rev. 0.00 3-37 STAR Line Mode Command Specifications 3-3-6) Horizontal Direction Printing Position ESC l n [Name] Set left margin[Code] ASCII ESC l n Hexadecimal 1B 6C n Decimal 27 108 n [Defined Area] Thermal : 0 ≤ n ≤ 255 Slip : 0 ≤ n ≤ (right margin -2) ≤ 255 Validation : 0 ≤ n ≤ (right margin -2...

Page 50 - ESC Q n

Rev. 0.00 3-38 STAR LIne Mode Command Specifications ESC Q n [Name] Set right margin[Code] ASCII ESC Q n Hexadecimal 1B 51 n Decimal 27 81 n [Defined Area] Thermal : 0 ≤ n ≤ 255 Slip : 2 ≤ n ≤ maximum printable digits ≤ 255 Validation : 2 ≤ n ≤ maximum printable digits ≤ 255 [Initial Value] Thermal ...

Page 51 - HT

Rev. 0.00 3-39 STAR Line Mode Command Specifications HT [Name] Move horizontal tab[Code] ASCII HT Hexadecimal 09 Decimal 9 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : - [Function] Move print position to next horizontal tab position. The curren...

Page 52 - ESC D NUL; Clears the currently set horizontal tab.; ESC GS A n1 n2; This command is ignored if the print region is exceeded.

Rev. 0.00 3-40 STAR LIne Mode Command Specifications ESC D NUL [Name] Clear horizontal tab[Code] ASCII ESC D NUL Hexadecimal 1B 44 00 Decimal 27 68 0 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : - [Function] Clears the currently set horizontal ...

Page 53 - ESC GS R n1 n2

Rev. 0.00 3-41 STAR Line Mode Command Specifications ESC GS R n1 n2 [Name] Move relative position[Code] ASCII ESC GS R n1 n2 Hexadecimal 1B 1D 52 n1 n2 Decimal 27 29 82 n1 n2 [Defined Area] Thermal : 0 ≤ n1 ≤ 255, 0 ≤ n2 ≤ 255 Slip : 0 ≤ n1 ≤ 255, 0 ≤ n2 ≤ 255 Validation : 0 ≤ n1 ≤ 255, 0 ≤ n2 ≤ 255...

Page 54 - ESC GS a n; When page mode is selected, only setting is valid

Rev. 0.00 3-42 STAR LIne Mode Command Specifications ESC GS a n [Name] Specify position alignment[Code] ASCII ESC GS a n Hexadecimal 1B 1D 61 n Decimal 27 29 97 n [Defined Area] Thermal : 0 ≤ n ≤ 2, 48 ≤ n ≤ 50, (“0” ≤ n ≤ “2”) Slip : 0 ≤ n ≤ 2, 48 ≤ n ≤ 50, (“0” ≤ n ≤ “2”) Validation : 0 ≤ n ≤ 2, 4...

Page 55 - Vertical; Horizontal

Rev. 0.00 3-43 STAR Line Mode Command Specifications 3-3-7) Download ESC & c1 c2 n d1 . . . d48 [Name] Register 12 x 24 dot font download characters[Code] ASCII ESC & c1 c2 n d1 .. d48 Hexadecimal 1B 26 c1 c2 n d1 .. d48 Decimal 27 38 c1 c2 n d1 .. d48 [Defined Area] Thermal : c1 = 1, 49, c2...

Page 57 - printed. 5 x 9 font characters are always printed.

Rev. 0.00 3-45 STAR Line Mode Command Specifications ESC & NUL n1 n2 [m d1 d2 d3 d4 d5 (d6 d7)] n 2 - n 1 + 1 [Name] Register download characters[Code] ASCII ESC & NUL n1 n2 [m d1 d2 d3 d4 d5 (d6 d7)] n2 - n1 + 1 Hexadecimal 1B 26 00 n1 n2 [m d1 d2 d3 d4 d5 (d6 d7)] n2 - n1 + 1 Decimal 27 38...

Page 58 - MSB

Rev. 0.00 3-46 STAR LIne Mode Command Specifications [Ex.:] When selecting 7 x 9 fonts, and defining the character to 21H: ESC & NUL n1 n2 m d1 d2 d3 d4 d5 d6 d7 Code (Hexadecimal) 1B 26 00 21 21 80 3E 40 88 00 88 40 3E (1 when printing corresponding bits, and 0 for no print)) [Ex.:] When select...

Page 66 - ESC FS q n

Rev. 0.00 3-54 STAR LIne Mode Command Specifications 3-3-9) Logo ESC FS q n [ x 11 x 1 2 y 11 y 1 2 d 1 … d k ] 1 … [ x n 1 x n 2 y n 1 y n 2 d 1 … d k ] n [Name] Register logo[Code] ASCII ESC FS q n [x11 x12 y11 y12 d1 .. dk]1 .. [xn1 xn2 yn1 yn2 d1 .. dk]n Hexadecimal 1B 1C 71 n [x11 x12 y11 y12 d...

Page 68 - ESC FS p n m

Rev. 0.00 3-56 STAR LIne Mode Command Specifications ESC FS p n m [Name] Print logo[Code] ASCII ESC FS p n m Hexadecimal 1B 1C 70 n m Decimal 27 28 112 n m [Defined Area] Thermal : 1 ≤ n ≤ 255 0 ≤ m ≤ 3, 48 ≤ m ≤ 51, (“0” ≤ m ≤ “3”) Slip : 1 ≤ n ≤ 255 0 ≤ m ≤ 3, 48 ≤ m ≤ 51, (“0” ≤ m ≤ “3”) Validati...

Page 69 - ESC RS L m; white inverted, and 90 ̊ right rotation) are unaffected by logos.

Rev. 0.00 3-57 STAR Line Mode Command Specifications ESC RS L m [Name] Logo batch control [Code] ASCII ESC RS L m Hexadecimal 1B 1E 4C m Decimal 27 30 76 m [Defined Area] Thermal : 0 ≤ m ≤ 3, 48 ≤ m ≤ 51, (“0” ≤ m ≤ “3”), m = 255 Slip : 0 ≤ m ≤ 3, 48 ≤ m ≤ 51, (“0” ≤ m ≤ “3”), m = 255 Validation : 0...

Page 71 - • ITF: k is freely set, and maximum value differs according to the mode.

Rev. 0.00 3-59 STAR Line Mode Command Specifications • n3: Bar Code Mode Selection n3 Bar Codes Types UPC-E, UPC-A, JAN/EAN8 Code39, NW-7 ITF JAN/EAN13, Code128, Code93 1, 49 Minimum module 2 dots Narrow : Wide = 2: 6 dots Narrow : Wide = 2: 5 dots 2, 50 Minimum module 3 dots Narrow : Wide = 3: 9 do...

Page 72 - ESC d n; • Models that perform only a full cut.:

Rev. 0.00 3-60 STAR LIne Mode Command Specifications 3-3-11) Cutter Control ESC d n [Name] Auto-cutter: [Code] ASCII ESC d n Hexadecimal 1B 64 n Decimal 27 100 n [Defined Area] Thermal : 0 ≤ d ≤ 3, 48 ≤ d ≤ 51 (“0” ≤ d ≤ “3”) Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : ...

Page 74 - BEL

Rev. 0.00 3-62 STAR LIne Mode Command Specifications BEL [Name] External device 1 drive instruction[Code] ASCII BEL Hexadecimal 07 Decimal 7 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : - [Function] Executes the external device drive conditions...

Page 75 - SUB

Rev. 0.00 3-63 STAR Line Mode Command Specifications SUB [Name] External device 2 drive instruction[Code] ASCII SUB Hexadecimal 1A Decimal 26 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : - [Function] Drives external device 2. The energizing tim...

Page 76 - ESC GS BEL m t1 t2; m specifies the buzzer drive terminal.

Rev. 0.00 3-64 STAR LIne Mode Command Specifications ESC GS BEL m t1 t2 [Name] Ring buzzer[Code] ASCII ESC GS BEL m t1 t2 Hexadecimal 1B 1D 07 m t1 t2 Decimal 27 29 7 m t1 t2 [Defined Area] Thermal : 1 ≤ m ≤ 2, 49 ≤ m ≤ 50 (“1” ≤ m ≤ “2”) 1 ≤ t1 ≤ 255, 1 ≤ t2 ≤ 255 Slip : 1 ≤ m ≤ 2, 49 ≤ m ≤ 50 (“1”...

Page 77 - ESC GS EM DC1 m n1 n2; Set external buzzer drive pulse condition.

Rev. 0.00 3-65 STAR Line Mode Command Specifications ESC GS EM DC1 m n1 n2 [Name] Set external buzzer drive pulse condition[Code] ASCII ESC GS EM DC1 m n1 n2 Hexadecimal 1B 1D 19 11 m n1 n2 Decimal 27 29 25 17 m n1 n2 [Defined Area] Thermal : 1 ≤ m ≤ 2, 49 ≤ m ≤ 50, (“1” ≤ m ≤ “2”) 0 ≤ n1 ≤ 255, 0 ≤...

Page 78 - ESC GS EM DC2 m n1 n2; pulse condition command ESC GS EM DC1 m t1 t2.

Rev. 0.00 3-66 STAR LIne Mode Command Specifications ESC GS EM DC2 m n1 n2 [Name] Execute external buzzer drive[Code] ASCII ESC GS EM DC2 m n1 n2 Hexadecimal 1B 1D 19 12 m n1 n2 Decimal 27 29 25 18 m n1 n2 [Defined Area] Thermal : 1 ≤ m ≤ 2, 49 ≤ m ≤ 50, (“1” ≤ m ≤ “2”) 1 ≤ n1 ≤ 20, n2 = 0 Slip : 1 ...

Page 79 - ESC RS d n; This command stops printing to be executed.

Rev. 0.00 3-67 STAR Line Mode Command Specifications 3-3-13) Print Settings ESC RS d n [Name] Set print density[Code] ASCII ESC RS d n Hexadecimal 1B 1E 64 n Decimal 27 30 100 n [Defined Area] Thermal : 0 ≤ n ≤ 15 48 ≤ n ≤ 57 (”0” ≤ n ≤ “9”), 65 ≤ n ≤ 70 (”A” ≤ n ≤ “F”) Slip : - Validation : - [Init...

Page 80 - ESC RS r n

Rev. 0.00 3-68 STAR LIne Mode Command Specifications ESC RS r n [Name] Set printing speed[Code] ASCII ESC RS r n Hexadecimal 1B 1E 72 n Decimal 27 30 114 n [Defined Area] Thermal : 0 ≤ n ≤ 2 48 ≤ n ≤ 50 (“0” ≤ n ≤ “2”) Slip : - Validation : - [Initial Value] Thermal : Memory switch setting Slip : - ...

Page 81 - ESC RS a n

Rev. 0.00 3-69 STAR Line Mode Command Specifications 3-3-14) Status ESC RS a n [Name] Set status transmission conditions[Code] ASCII ESC RS a n Hexadecimal 1B 1E 61 n Decimal 27 30 97 n [Defined Area] Thermal : 0 ≤ n ≤ 3, 48 ≤ n ≤ 51, (“0” ≤ n ≤ “51”) Slip : 0 ≤ n ≤ 3, 48 ≤ n ≤ 51, (“0” ≤ n ≤ “51”) ...

Page 82 - ESC ACK SOH

Rev. 0.00 3-70 STAR LIne Mode Command Specifications ESC ACK SOH [Name] Real-time printer status (ASB Status)[Code] ASCII ESC ACK SOH Hexadecimal 1B 06 01 Decimal 27 6 1 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : - [Function] This command is ...

Page 83 - EOT

Rev. 0.00 3-71 STAR Line Mode Command Specifications EOT [Name] Real-time printer status (2)[Code] ASCII EOT Hexadecimal 04 Decimal 4 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : - [Function] This command is effective only when using an interfa...

Page 84 - ESC RS E n; Clears the ASB ETB counter to zero and clears the ETB status.

Rev. 0.00 3-72 STAR LIne Mode Command Specifications ESC RS E n [Name] Initialize ASB ETB counter, and ETB status. [Code] ASCII ESC RS E n Hexadecimal 1B 1E 45 n Decimal 27 30 69 n [Defined Area] Thermal : n = 0, 48 (“0”) Slip : n = 0, 48 (“0”) Validation : n = 0, 48 (“0”) [Initial Value] Thermal : ...

Page 85 - ESC p; ESC q

Rev. 0.00 3-73 STAR Line Mode Command Specifications 3-3-15) Kanji Characters ESC p [Name] Specify JIS Kanji character mode [Code] ASCII ESC p Hexadecimal 1B 70 Decimal 27 112 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : Cancel JIS Kanji character mode Slip : Cancel J...

Page 89 - They are designed as shown below and data is sent sequentially.

Rev. 0.00 3-77 STAR Line Mode Command Specifications ESC r c1 c2 d1 … dk [Name] Register Chinese download characters[Code] ASCII ESC r c1 c2 d1 .. dk Hexadecimal 1B 72 c1 c2 d1 .. dk Decimal 27 114 c1 c2 d1 .. dk [Defined Area] Thermal : 0 ≤ d ≤ 255 k = 72, c1 and c2 differ according to specificatio...

Page 90 - Horizontal 16 dot

Rev. 0.00 3-78 STAR LIne Mode Command Specifications <Slip>, <Validation> The defined ranges are shown below. Specifications c1 c2 Registration count Japanese Language Kanji characters c1 = 77h 21h ≤ c2 ≤ 7Eh 94 Characters They are designed as shown below and data is sent sequentially. T...

Page 91 - ESC u n

Rev. 0.00 3-79 STAR Line Mode Command Specifications ESC u n [Name] Specify two-byte 16 x 16 dot Kanji character (Single density/double density) [Code] ASCII ESC u n Hexadecimal 1B 75 n Decimal 27 117 n [Defined Area] Thermal : - Slip : n = 0, 1, n = 48, 49 (“0,” “1”) Validation : n = 0, 1, n = 48, ...

Page 92 - ESC x n

Rev. 0.00 3-80 STAR LIne Mode Command Specifications ESC x n [Name] Specify expanded Kanji characters (Double tall/double high & wide)[Code] ASCII ESC x n Hexadecimal 1B 78 n Decimal 27 120 n [Defined Area] Thermal : - Slip : n = 0, 1, n = 48, 49 (“0,” “1”) Validation : n = 0, 1, n = 48, 49 (“0,...

Page 93 - ESC w n;

Rev. 0.00 3-81 STAR Line Mode Command Specifications ESC w n [Name] Specify expanded Kanji characters (batch double tall/double high & wide)[Code] ASCII ESC w n Hexadecimal 1B 77 n Decimal 27 119 n [Defined Area] Thermal : - Slip : n = 0, 1, n = 48, 49 (“0,” “1”) Validation : n = 0, 1, n = 48, 4...

Page 94 - RS

Rev. 0.00 3-82 STAR LIne Mode Command Specifications 3-3-16) Others RS [Name] Ring buzzer[Code] ASCII RS Hexadecimal 1E Decimal 30 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : - [Function] Issues a short buzzer sound from the printer. Execute t...

Page 96 - ESC U n

Rev. 0.00 3-84 STAR LIne Mode Command Specifications ESC U n [Name] Select printing direction[Code] ASCII ESC U n Hexadecimal 1B 55 n Decimal 27 85 n [Defined Area] Thermal : - Slip : 0 ≤ n ≤ 2, 48 ≤ n ≤ 50, (“0” ≤ n ≤ “2”) Validation : 0 ≤ n ≤ 2, 48 ≤ n ≤ 50, (“0” ≤ n ≤ “2”) [Initial Value] Thermal...

Page 97 - ESC GS # m N n1 n2 n3 n4 LF NUL; : Memory switch number to specify

Rev. 0.00 3-85 STAR Line Mode Command Specifications ESC GS # m N n1 n2 n3 n4 LF NUL [Name] Set memory switch [Code] ASCII ESC GS # m N n1 n2 n3 n4 LF NUL Hexadecimal 1B 1D 23 m N n1 n2 n3 n4 0A 00 Decimal 27 29 35 m N n1 n2 n3 n4 10 0 [Defined Area] Thermal : m = 87, 84, 44, 43, 45, 64, 75, 76 (m =...

Page 114 - Moves vertical direction position.; ESC FF NUL

Rev. 0.00 3-102 STAR LIne Mode Command Specifications ESC * r Y n NUL [Name] Move vertical direction position (Line feed for specified dots) [Code] ASCII ESC * r Y n NUL Hexadecimal 1B 2A 72 59 n 00 Decimal 27 42 114 89 n 0 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal :...

Page 115 - ESC FF EOT; Discard specified byte count of data

Rev. 0.00 3-103 STAR Line Mode Command Specifications ESC FF EOT [Name] Execute EOT mode[Code] ASCII ESC FF EOT Hexadecimal 1B 0C 04 Decimal 27 12 4 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : - [Function] <Thermal> Executes EOT mode. Ex...

Page 117 - -5) Black Mark Related Command Details

Rev. 0.00 3-105 STAR Line Mode Command Specifications 3-5) Black Mark Related Command Details The following commands control top of form functions using black mark paper. The following commands are effective only when black mark is set to be effective. ESC d n [Name] Auto - cutter: [Code] ASCII ESC ...

Page 118 - Executes top of form.; When black mark is effective, this command is ignored.

Rev. 0.00 3-106 STAR LIne Mode Command Specifications FF [Name] Execute top of form[Code] ASCII FF Hexadecimal 0CDecimal 12 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : - [Function] <Thermal> Executes top of form. <Slip>, <Valida...

Page 121 - ESC B NUL

Rev. 0.00 3-109 STAR Line Mode Command Specifications ESC B NUL [Name] Clear vertical tab position[Code] ASCII ESC B NUL Hexadecimal 1B 42 00 Decimal 27 66 0 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : - [Function] <Thermal> When black m...

Page 122 - ESC RS c n

Rev. 0.00 3-110 STAR LIne Mode Command Specifications 3-6) 2-Color Printing Command Details The following commands control 2-color printing functions. The following commands are effective only when using a model handling 2-color printing. ESC RS c n [Name] Set print color in 2-color print mode[Code]...

Page 123 - ESC RS C n; • The specification of this command is not cleared by ESC @ CAN.

Rev. 0.00 3-111 STAR Line Mode Command Specifications ESC RS C n [Name] Select/cancel 2-color print mode[Code] ASCII ESC RS C n Hexadecimal 1B 1E 43 n Decimal 27 30 67 n [Defined Area] Thermal : 0 ≤ n ≤ 2, 48 ≤ n ≤ 50 (“0” ≤ n ≤ “2”), n = 16, n =32 Slip : - Validation : - [Initial Value] Thermal : n...

Page 127 -

Rev. 0.00 3-115 STAR Line Mode Command Specifications ESC FS q n [ x 11 x 1 2 y 11 y 1 2 d 1 … d k ] 1 … [ x n 1 x n 2 y n 1 y n 2 d 1 … d k ] n [Name] Register logo[Code] ASCII ESC FS q n [x11 x12 y11 y12 d1 .. dk]1 .. [xn1 xn2 yn1 yn2 d1 .. dk]n Hexadecimal 1B 1C 71 n [x11 x12 y11 y12 d1 .. dk]1 ....

Page 130 - L O T T E R Y 1 0; Mark Printing

Rev. 0.00 3-118 STAR LIne Mode Command Specifications 3-7) Mark Command Details This command is specialized to mark sheet printing for lotteries. This command can print lines. Print Sample Command Transmission Example • Mark Format Mark Height h = 10 dots; Mark Line Feed Amount V = 20 dots Mark numb...

Page 134 - -8) AUTO LOGO Function Command Details; ) Standard Auto Logo Function

Rev. 0.00 3-122 STAR LIne Mode Command Specifications 3-8) AUTO LOGO Function Command Details If the portion that was changed was only the product name in a system, like the one below, already operating, this command functions to print a logo like the one below by only changing the product name. Thi...

Page 140 - ESC GS / 3 nL nH d1 d2 ... dk

Rev. 0.00 3-128 STAR LIne Mode Command Specifications ESC GS / 3 nL nH d1 d2 … dk [Name] Set user macro 1 [Code] ASCII ESC GS / 3 nL nH d1 d2 ... dk Hexadecimal 1b 1d 2f 33 nL nH d1 d2 ... dk Decimal 27 29 47 51 nL nH d1 d2 ... dk [Defined Area] Thermal : 1 ≤ nL ≤ 64, nH = 0 1 ≤ (nL + nH x 256) ≤ 64...

Page 141 - ESC GS / 4 nL nH d1 d2 ... dk

Rev. 0.00 3-129 STAR Line Mode Command Specifications ESC GS / 4 nL nH d1 d2 … dk [Name] Set user macro 2 [Code] ASCII ESC GS / 4 nL nH d1 d2 ... dk Hexadecimal 1b 1d 2f 34 nL nH d1 d2 ... dk Decimal 27 29 47 52 nL nH d1 d2 ... dk [Defined Area] Thermal : 1 ≤ nL ≤ 64, nH = 0 1 ≤ (nL + nH x 256) ≤ 64...

Page 147 - ESC GS x S 1 n

Rev. 0.00 3-135 STAR Line Mode Command Specifications ESC GS x S 0 n p1 p2 [Name] PDF417 bar code size setting [Code] ASCII ESC GS x S 0 n p1 p2 Hexadecimal 1B 1D 78 53 30 n p1 p2 Decimal 27 29 120 83 48 n p1 p2 [Defined Area] Thermal : n = 0, 1 When n = 0 1 ≤ p1 ≤ 99, 1 ≤ p2 ≤ 99 When n = 1 p1 = 0 ...

Page 148 - ESC GS x S 2 n

Rev. 0.00 3-136 STAR LIne Mode Command Specifications ESC GS x S 2 n [Name] Set PDF417 module X direction size [Code] ASCII ESC GS x S 2 n Hexadecimal 1B 1D 78 53 32 n Decimal 27 29 120 83 50 n [Defined Area] Thermal : 1 ≤ n ≤ 10 Slip : - Validation : - [Initial Value] Thermal : n = 2 Slip : - Valid...

Page 149 - ESC GS x D nL nH d1 d2 ... dk

Rev. 0.00 3-137 STAR Line Mode Command Specifications ESC GS x D nL nH d1 d2 … dk [Name] PDF417 bar code data setting [Code] ASCII ESC GS x D nL nH d1 d2 … dk Hexadecimal 1B 1D 78 44 nL nH d1 d2 … dk Decimal 27 29 120 68 nL nH d1 d2 … dk [Defined Area] Thermal : 0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255 1 ≤ (nL + ...

Page 150 - ESC GS x I; information such as the presence of errors is sent to the printer.

Rev. 0.00 3-138 STAR LIne Mode Command Specifications ESC GS x I [Name] Get PDF417 bar code expansion information [Code] ASCII ESC GS x I Hexadecimal 1B 1D 78 49 Decimal 27 29 120 73 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : - [Function] <...

Page 151 - -10) Print Starting Trigger Control Command Details

Rev. 0.00 3-139 STAR Line Mode Command Specifications 3-10) Print Starting Trigger Control Command Details This command is for models equipped with an expansion control function that page-controls the command in line units by page-controlling the image buffer. ESC GS g 0 m n [Name] Print starting tr...

Page 155 - ESC GS y S 0 n

Rev. 0.00 3-143 STAR Line Mode Command Specifications ESC GS y S 0 n [Name] Set QR code model [Code] ASCII ESC GS y S 0 n Hexadecimal 1B 1D 79 53 30 n Decimal 27 29 121 83 48 n [Defined Area] Thermal : 1 ≤ n ≤ 2 Slip : - Validation : - [Initial Value] Thermal : n = 2 Slip : - Validation : - [Functio...

Page 156 - ESC GS y S 2 n; Parameter details

Rev. 0.00 3-144 STAR LIne Mode Command Specifications ESC GS y S 2 n [Name] Set QR code cell size [Code] ASCII ESC GS y S 2 n Hexadecimal 1B 1D 79 53 32 n Decimal 27 29 121 83 50 n [Defined Area] Thermal : 1 ≤ n ≤ 8 Slip : - Validation : - [Initial Value] Thermal : n = 3 Slip : - Validation : - [Fun...

Page 157 - ESC GS y D 1 m nL nH d1 d2 ... dk

Rev. 0.00 3-145 STAR Line Mode Command Specifications ESC GS y D 1 m nL nH d1 d2 … dk [Name] QR code data setting (automatic setting) [Code] ASCII ESC GS y D 1 m nL nH d1 d2 … dk Hexadecimal 1B 1D 79 44 31 m nL nH d1 d2 … dk Decimal 27 29 121 68 49 m nL nH d1 d2 … dk [Defined Area] Thermal : m = 0 0...

Page 159 - ESC GS y P; This command prints the bar code data.; ESC GS y I; the generated image and errors is sent to the printer.

Rev. 0.00 3-147 STAR Line Mode Command Specifications ESC GS y P [Name] Print QR code [Code] ASCII ESC GS y P Hexadecimal 1B 1D 79 50 Decimal 27 29 121 80 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : - [Function] <Thermal> This command pr...

Page 160 - ESC GS h 0 k m n; Sets to make 180 ̊ inversion function valid/invalid.; 80 ̊ Inversion Triggers

Rev. 0.00 3-148 STAR LIne Mode Command Specifications 3-12) Page Function Command Details ESC GS h 0 k m n [Name] 180˚ inversion function [Code] ASCII ESC GS h 0 k m n Hexadecimal 1B 1D 68 30 k m n Decimal 27 29 104 48 k m n [Defined Area] Thermal : 0 ≤ k ≤ 1, m = 0, n = 0 Slip : - Validation : - [I...

Page 161 - ESC GS h 1 k m n

Rev. 0.00 3-149 STAR Line Mode Command Specifications ESC GS h 1 k m n [Name] Water mark function [Code] ASCII ESC GS h 1 k m n Hexadecimal 1B 1D 68 31 k m n Decimal 27 29 104 49 k m n [Defined Area] Thermal : 0 ≤ k ≤ 2, 0 ≤ m ≤ 2, 1 ≤ n ≤ 255 Slip : - Validation : - [Initial Value] Thermal : - Slip...

Page 163 - ESC SI n; ESC FF n

Rev. 0.00 3-151 STAR Line Mode Command Specifications 3-13) Slip/Validation Function Command Details ESC SI n [Name] Set slip sensor [Code] ASCII ESC SI n Hexadecimal 1B 0F n Decimal 27 15 n [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : - [Funct...

Page 164 - ESC VT m n; Four bytes ignored; ESC EM n m LF NUL

Rev. 0.00 3-152 STAR LIne Mode Command Specifications ESC VT m n [Name] Sets slip paper discharge direction and discharge length[Code] ASCII ESC VT m n Hexadecimal 1B 0B m n Decimal 27 11 m n [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : - [Func...

Page 165 - Refer to “Page Control Command.”

Rev. 0.00 3-153 STAR Line Mode Command Specifications 3-14) Page Mode Command Details FF [Name] Batch printing of page data (valid only in page mode)[Code] ASCII FF Hexadecimal 0CDecimal 12 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : - [Functi...

Page 166 - ESC n

Rev. 0.00 3-154 STAR LIne Mode Command Specifications ESC n [Name] Selects page mode [Code] ASCII ESC n Hexadecimal 1B 6E Decimal 27 110 [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : - [Function] <Thermal> Two bytes ignored <Slip>, &...

Page 168 - ESC * xL xH yL yH dxL dxH dyL dyH

Rev. 0.00 3-156 STAR LIne Mode Command Specifications ESC * xL xH yL yH dxL dxH dyL dyH [Name] Set page mode print region [Code] ASCII ESC * xL xH yL yH dxL dxH dyL dyH Hexadecimal 1B 2A xL xH yL yH dxL dxH dyL dyH Decimal 27 42 xL xH yL yH dxL dxH dyL dyH [Defined Area] Thermal : - Slip : 0 ≤ xL ≤ ...

Page 169 - ESC T n

Rev. 0.00 3-157 STAR Line Mode Command Specifications ESC T n [Name] Set page mode rotation direction [Code] ASCII ESC T n Hexadecimal 1B 54 n Decimal 27 84 n [Defined Area] Thermal : - Slip : 0 ≤ n ≤ 3, 48 ≤ n ≤ 51, (“0” ≤ n ≤ “3”) Validation : 0 ≤ n ≤ 3, 48 ≤ n ≤ 51, (“0” ≤ n ≤ “3”) [Initial Value...

Page 170 - -15) Station Selection Command Details; Selects printer station

Rev. 0.00 3-158 STAR LIne Mode Command Specifications 3-15) Station Selection Command Details ESC + A n [Name] Select printer station [Code] ASCII ESC + A n Hexadecimal 1B 2B 41 n Decimal 27 43 65 n [Defined Area] Thermal : n = 0, 3, 4, “0”, “3”, “4” Slip : n = 0, 3, 4, “0”, “3”, “4” Validation : n ...

Page 171 - ESC SYN 0 n; ESC SYN 1 n; ESC SYN 3 n

Rev. 0.00 3-159 STAR Line Mode Command Specifications 3-16) Presenter Related Command Details The following commands control the presenter functions. The following commands are effective only on models equipped with a presenter. ESC SYN 0 n [Name] Execute presenter paper recovery[Code] ASCII ESC SYN...

Page 172 - ESC SYN 4 n

Rev. 0.00 3-160 STAR LIne Mode Command Specifications ESC SYN 4 n [Name] Initialize presenter paper counter[Code] ASCII ESC SYN 4 n Hexadecimal 1B 16 4 n Decimal 27 22 52 n [Defined Area] Thermal : - Slip : - Validation : - [Initial Value] Thermal : - Slip : - Validation : - [Function] Four bytes ig...

Page 173 - ESC FS M m n; Five bytes ignored

Rev. 0.00 3-161 STAR Line Mode Command Specifications 3-17) MICR Related Command Details The following commands control MICR functions. The following commands are effective only on models equipped with MICR. ESC FS M m n [Name] MICR function [Code] ASCII ESC FS M m n Hexadecimal 1B 1C 4D m n Decimal...

Page 175 - CHARACTER CODE TABLES; Character Code Specifications References

Rev. 0.00 4-1 STAR LIne Mode Command Specifications 4. CHARACTER CODE TABLES Character Code Specifications References

Page 185 - Slip/Validation Condition Support Table

Rev. 0.00 5-10 STAR LIne Mode Command Specifications <Printer status 4 Sensor Information (Sixth Byte)> Bit Contents Status By model “0” “1” HSP7000 7 Fixed at “0” - - 6 Not Used (Fixed at “0”) - - 5 Not Used (Fixed at “0”) - 4 Fixed at “0” - - 3 Paper end Paper No paper ○ 2 Paper Near-end (In...

Page 187 - Interfaces; Printer Status

Rev. 0.00 5-12 STAR LIne Mode Command Specifications 5-2-4) Printer Status Transmission Specification when using Ethernet and Wireless LAN Interfaces The following explains the printer status transmission specification when using Ethernet and wireless LAN interfaces. 1) Transmission format: • When t...

Page 189 - Appendix 3 – Blank Code Page Configuration ; using the command below.

Rev. 0.00 5-14 STAR LIne Mode Command Specifications 5-3) Appendix 3 – Blank Code Page Configuration <Thermal> Blank code pages are character code tables that are empty from character code 80H to FFH. They can be specified using the command below. • ESC GS t n (n = 255) Also, it is possible to...

Page 191 - : QR Code Maximum Input Character Count in Each Verson ; ) Model 1 Versions and Maximum Input Character Count

Rev. 0.00 5-16 STAR LIne Mode Command Specifications 5-4) Appendix 4 : QR Code Maximum Input Character Count in Each Verson <Thermal> 1) Model 1 Versions and Maximum Input Character Count Version Number of Cells on One Side Error Correction Level Numbers English Language Characters Binary Kanj...

Page 195 - SPECIAL APPENDIX COMMAND LIST BY MODEL

Rev. 0.00 6-1 STAR LIne Mode Command Specifications 6. SPECIAL APPENDIX COMMAND LIST BY MODEL ○ : Valid Commands • : Valid Commands (Independent Functions on Thermal/Slip) ‡ : Command where only settings are valid × : Invalid command (Ignored) • Standard Commands Class Commands Class Model Name HSP7...

Page 197 - • Black mark related commands; • 2-Color Printing Related Commands

Rev. 0.00 6-3 STAR LIne Mode Command Specifications • Raster related commands Class Commands Class Model Name HSP7000 Set Executed Thermal Slip Raster ESC * r R ○ ○ × ESC * r A ○ ○ × ESC * r B ○ ○ × ESC * r C ○ ○ × ESC * r D ○ ○ × ESC * r E ○ ○ × ESC * r F ○ ○ × ESC * r P ○ ○ × ESC * r Q ○ ○ × ESC *...

Page 198 - • Print Start Trigger Control Commands

Rev. 0.00 6-4 STAR LIne Mode Command Specifications • Auto Logo Commands Class Commands Class Model Name HSP7000 Set Executed Thermal Slip Auto Logo ESC GS / W ○ ○ ○ ESC GS / C ○ ○ ○ ESC GS / 1 ○ ○ ‡ ESC GS / 2 ○ ○ ‡ ESC GS / 3 ○ ○ ‡ ESC GS / 4 ○ ○ ‡ ESC GS / 5 ○ ○ ‡ ESC GS / 6 ○ ○ ‡ • PDF417 Comman...

Page 200 - SPECIAL APPENDIX COMMAND FUNCTION LIST

Rev. 0.00 7-1 STAR LIne Mode Command Specifications 7. SPECIAL APPENDIX COMMAND FUNCTION LIST 7-1) HSP7000 7-1-1) Setting Command List Execution Station Thermal Slip Validation Type Command Thermal, Slip, Validation Line Other Precautions Line/Page Other Precautions Line/Page Other Precautions Font ...

Page 209 - ELECTRONIC PRODUCTS DIVISION; OVERSEAS SUBSIDIARY COMPANIES

Rev. 0.00 2008.09.29 Printed in Japan, 8087710 5 ELECTRONIC PRODUCTS DIVISION STAR MICRONICS CO., LTD. 536 Nanatsushinya, Shimizu-ku, Shizuoka, 424-0066 Japan Tel: (int+81)-54-347-0112, Fax: (int+81)-54-347-0709 Please access the following URL http://www.star-m.jp/eng/dl/dl02.htm for the latest revi...

Star Micronics Line Thermal/Dot Printer - Manual

Table of Contents:

Summary

Other Star Micronics Models