Star Micronics NP-225 - Manual
Star Micronics NP-225 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Read carefully Before Using the Printer; element may be damaged.
- Page 4 – the basis of our long experience as a printer manufacturer.
- Page 22 – Control command table
- Page 25 – LSB
- Page 44 – International character code table
- Page 45 – CUT ONLY
Spec. No D-F0301
Specifications for
Kiosk module printer
NP-215
NP-225
NP-325
NP-415W
Revision 1.00 2000.08.01 1 edition
Revision 2.00 2001.04.18 2 edition
Revision 2.10 2001.06.13 3 edition
Revision 2.20 2002.01.29 4 edition
Revision 2.30 2002.02.15 5 edition
Revision 2.40 2002.03.26 6 edition
Revision 2.50 2002.04.12 7 edition
Revision 2.60 2002.07.09 8 edition
Revision 2.70 2003.01.31 9 edition
《
Notice
》
･
All features and specifications described are subject to change without notice.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Read carefully Before Using the Printer Wrong handling of the printer may cause its performance declined and the product damaged. Please read the notes below before handling. 1. Static discharge prevention must be made for installation and removal of the printer to protect IC and other electrical pa...
1 1. Overview 1.1 Overview The printer is categorized as following. NP - * * 5 * * 1 2 3 4 1: Paper width, 2 = 2 inches, 3 = 3 inches 2: Paper setting, 1= Paper holder type, 2 = Drop-in type 3: Interface, P = Parallel, R = Serial, D = Parallel/Serial compatible 4: OEM number * D type is parallel and...
19 5. Control commands 5.1 Control command table Control codes Functions Pages 1 HT Horizontal tab 20 2 CR Carriage return 20 3 LF Print and line feed 20 4 FF Page feed 20 5 ESC C n Page length set for n lines 20 6 ESC SP n Character right space set 20 7 ESC ! n Print mode overall set 21 8 ESC % n D...
