Page 2 - THIS ELLIPTICAL IS INTENDED FOR; Table of Contents
XE Series Elliptical 1 Product Registration ..2 Important Safety Instructions 3 Important Electrical Information 4 Important Operation Instructions ..4 Assembly Instructions .5 Operation of Your New Elliptical ...11 Manufacturer s Limited Warranty ..15 ATTENTION- THIS ELLIPTICAL IS INTENDED FOR RESI...
Page 3 - RECORD YOUR SERIAL NUMBER; REGISTER YOUR PURCHASE; CONGRATULATIONS ON YOUR; Product Registration
XE Series Elliptical 2 Thank you for your purchase of this quality elliptical trainer from Spirit Manufacturing, Inc.Your new elliptical was manufactured by one of the leading fitness manufacturers in theworld and is backed by one of the most comprehensive warranties available. Throughyour dealer, S...
Page 4 - WARNING; - Read all instructions before using this appliance.; elliptical; Important Safety Instructions
XE Series Elliptical 3 WARNING - Read all instructions before using this appliance. Do not operate elliptical on deeply padded, plush or shag carpet. Damage to both carpet and elliptical may result. Keep children away from the elliptical . There are obvious pinch points and other caution areas that ...
Page 5 - Important Electrical Information
XE Series Elliptical 4 WARNING! NEVER remove any cover without first disconnecting AC power supply. If A.C. voltage varies by ten percent (10%) or more, the performance of your elliptical may be affected. Such conditions are not covered under your warranty. If you sus pect the voltage is low, contac...
Page 6 - UNPACKING THE UNIT; three; STEP 2: HANDLE BAR ASSEMBLY; Assembly Instructions
XE Series Elliptical 5 UNPACKING THE UNIT 1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along the dotted Line. Lift Box over the unit and unpack. 2. Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged parts are found, or parts are...
Page 7 - STEP 3: CONNECTING ARM ASSEMBLY; Nyloc; STEP 4: PLASTICS ASSEMBLY
XE Series Elliptical 6 STEP 3: CONNECTING ARM ASSEMBLY 1. Align the hole in the end of the Connecting arms (L&R)(pivoting rod end) with the hole in the bracket of the Lower Handle Bars (L&R). The rod end should be on the inside ofthe Lower Handle Bars (L&R) bracket. Take 2pcs of 5/16"...
Page 8 - Assembly drawing
Page 12 - The; XE Series Elliptical is lifted.; Getting familiar with the control panel; Operation of Your Elliptical
XE Series Elliptical 11 The elliptical is equipped with two transport wheels which are engaged when rear of XE Series Elliptical is lifted. Getting familiar with the control panel Starting a programQuick Start After the cons ole powers up you may press the Start key to begin, this will initiate the ...
Page 13 - Manual
XE Series Elliptical 12 Manual Using the Up/Down keys, highlight the Manual icon at the top of the display and press Enter key.The profile will be blinking and you may use the Up/Down keys to adjust the program work leveland then press Enter. The Time window will now be blinking. Use the Up/Down key...
Page 14 - User Program
XE Series Elliptical 13 User Program This mode allows you to build and save your own custom program.Press the Up or Down key until the User icon at the top of the display is blinking then press Enter.The first column of the profile will be blinking. Use the Up/Down keys to adjust the work level then...
Page 15 - FUNCTIONS; Count down: counts down from preset time to zero.
XE Series Elliptical 14 FUNCTIONS TIME: Count up: accumulates training time from zero to 99:59. Count down: counts down from preset time to zero. SPEED/ RPM: Automatically toggles between SPEED and RPM every 6 seconds. Speed is in miles per hour (or kilometers per hour) DISTANCE: Count up: accumulat...
Page 16 - ELLIPTICAL WARRANTY; Manufacturer’s Limited Warranty
XE Series Elliptical 15 Effective September 15, 2006 ELLIPTICAL WARRANTY Spirit Manufacturing Inc. warrants all its elliptical parts for a period of 2 years fr om the date of retail sale, as determined by sale receipt, or in the absence of a receipt eighteen (18) months from the original factory shi...