Smeg WMI12C7- Manuals

Smeg WMI12C7– User Manual in PDF format online.

Manuals:

User Manual

User Manual Smeg WMI12C7

Summary

Page 2 - Contents; Precautions for safety and use; This appliance is tagged

1 Contents 1. Precautions for safety and use 2 2. Installation instructions 5 3. Description of controls 8 4. Using the appliance for washing 9 5. Cleaning and maintenance 15 6. Troubleshooting 17 This appliance is tagged in accordance with European Directive 2002/96/EC on Waste Electrical and E- le...

Page 3 - EN; READ THE INSTRUCTIONS; PRECAUTIONS FOR SAFETY AND USE; Disposing of packaging

EN 2 READ THE INSTRUCTIONS Attention! You are advised to read all the instructions in this manual carefully; it will inform you about the right conditions for the proper, safe use of your washing machine. It is very important to keep this instruction manual with the appliance for future ref-erence. ...

Page 5 - For Great Britain only; The manufacturer declines all responsibility

EN 4 For Great Britain only Warning : this appliance must be earthed. Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T.A . approved fuse to BS 1362 type and proceed as follows: 1. Remove the fuse cover...

Page 6 - all

EN 5 2. INSTALLATION INSTRUCTIONS Important! The appliance must be installed by a qualified engineer in compliance with the relevant regulations. The washing machine is heavy. Take care when lifting it. 2.1 UNPACKING The unit on flexible mounts is fixed in place for transport using the screws ( A) o...

Page 7 - POSITIONING AND LEVELLING; Place the appliance in the

EN 6 2.2 POSITIONING AND LEVELLING 1. Place the appliance in the chosen position. 2. Level the appliance carefully in all directions with the aid of a spirit level, adjusting the height of the feet if necessary. Once done, fix the feet in pla-ce with the locknuts provided. 3. On appliances with adju...

Page 8 - CONNECTING TO THE WATER SUPPLY

EN 7 2.3 CONNECTING TO THE WATER SUPPLY 1. Check that the water supply pressure is in the following range: 0,05-0,9MPa . With higher pressures, use a pressure reducer. 2. Connect the cold water supply hose ( blue screw collar) to the cold water tap with ¾ gas threaded connector, taking care to tight...

Page 9 - pulling on the lead.; DESCRIPTION OF CONTROLS; Programme Selector

EN 8 • If the power supply lead is damaged, it must only be replaced with an original spare, available from the After- Sales Service. • Do not connection/disconnect the power supply plug from the socket with wet hands • Only disconnect the power supply plug from the socket by taking hold of the plug...

Page 10 - PREPARING THE ITEMS FOR WASHING; Do not wash unhemmed or torn items as they may fray.; OPENING THE DOOR; pending on the temperature reached inside the appliance.; LOADS OF WASHING; to save electricity, it is more economical to wash complete

EN 9 4. USING THE APPLIANCE FOR WASHING 4.1 PREPARING THE ITEMS FOR WASHING 1. Subdivide the items for washing by fabric type and colour fastness. 2. Wash white and coloured items separately. New coloured items should be washed separately the first time. Normally, items carry labels with washing ins...

Page 11 - LOADING THE ITEMS FOR WASHING; loaded with up to 7kg; ADDING DETERGENT AND ADDITIVE; Never fill with liquids above the maximum level marked; Level of hardness

EN 10 4.4 LOADING THE ITEMS FOR WASHING 1. Open the door and load the washing, distributing it evenly over the drum, with items opened out and not bundled together; if possible, large and small items should be well mixed. 2. The washing machine covered by this manual can be loaded with up to 7kg of ...

Page 12 - POWDER DETERGENT DOSES; Laundry with normal dirt; LIQUID DETERGENT DOSES; all programmes without prewash.; PROGRAMMES AND FUNCTIONS; no spin cycle and the appliance will stop with the tank full. If

EN 11 4.6 POWDER DETERGENT DOSES Laundry with normal dirt 1. Choose a programme without prewash. 2. Pour the total amount of detergent shown on the pack into the main wash compartment of the detergent dra- wer. Very dirty laundry 1. Choose a programme with prewash. 2. Place ¼ of the recommended amou...

Page 13 - SELECTING AND CONFIRMING OPTIONS; able for loads of particularly dirty items.; Option selection; Options; Start Pause

EN 12 4.11 SELECTING AND CONFIRMING OPTIONS 1. The Option Selection button can be used to select the following options in sequence (from the top down): Prewash : adds a stage before the main wash, lasting about 20 minutes at a temperature of 35°C. Suit- able for loads of particularly dirty items. In...

Page 14 - mains constantly lit.; STARTING THE WASHING PROGRAMME; Start Pause symbol on the display is constantly on.; INTERRUPTING OR CHANGING THE WASHING PROGRAMME; Delay Time to end

EN 13 4.12 TIME TO END 1. The Time to End key can be pressed repeatedly to select the time after which the washing programme will end. The time to end of cycle function calculates the initial duration of the washing cycle, the settings made (temperature, spin speed and options) which may shorten or ...

Page 15 - Switch the appliance off by turning the programmes knob to OFF; OPENING THE APPLIANCE IN AN EMERGENCY; Pull the lever down and open the door.; Child Lock Symbol

EN 14 4.15 PROGRAMME END Washing programmes are completed automatically. The word END appears on the display and the "Time remain-ing" light goes out. 1. Switch the appliance off by turning the programmes knob to OFF 2. Unload the laundry from the drum. 3. Leave the door ajar to allow the in...

Page 16 - CLEANING THE OUTSIDE OF THE APPLIANCE; Regular, thorough cleaning will keep your appliance looking good.; CLEANING THE DRUM

EN 15 5. CLEANING AND MAINTENANCE Important – Before carrying out any cleaning or maintenance procedure, the plug must be disconnected from the power supply socket. 5.1 CLEANING THE OUTSIDE OF THE APPLIANCE • Regular, thorough cleaning will keep your appliance looking good. • Clean the exterior of t...

Page 17 - Unscrew the cover of the pump “D” by turning it to the left.; CLEANING THE DETERGENT DRAWER; Turn off the water tap.

EN 16 3. Extract the drain hose ”A”. Warning: if the hose is hot, the water is hot or boiling hot. Place a shallow container on the floor and remove the plug “B” to drain off the water. Depending on the amount of water in the appliance, the container may have to be emptied several times. When no mor...

Page 19 - Appliance does not spin; ERROR DISPLAY; Error code

EN 18 11 Appliance does not spin Anti-imbalance safety device tripped because laundry not evenly distrib-uted in drum. If laundry is still wet at end of cycle, rearrange it in the drum by hand and repeat spin programme only. 12 Emptying water from drum In the event of a power blackout or appliance f...

Page 20 - PROGRAM GUIDE

PROGRAM GUIDE Programs Temp. (°C) Max. Spin (rpm) Max. washing load (kg) Prewash Wash Conditioner Prewash Intensive Easy Iron Extra rinse Rapid Wash program description Cotton and coloureds Delicate coloureds with light dirt Cold Max 7 Cold wash, rinses and final spin at the selected speed Delicate ...