Smeg WDI147- Manuals

Smeg WDI147– User Manual in PDF format online.

Manuals:

User Manual

User Manual Smeg WDI147

Summary

Page 2 - EN; Contents; This appliance is tagged

1 EN Contents 1. Precautions for safety and use 2 2. Installation instructions 5 3. Description of controls 8 4. Using the appliance for washing 9 5. Using the appliance for drying 17 6. Cleaning and maintenance 20 7. Troubleshooting 22 This appliance is tagged in accordance with European Directive ...

Page 3 - READ THE INSTRUCTIONS; PRECAUTIONS FOR SAFETY AND USE; Disposing of packaging; The manufacturer declines all liability for uses other than

EN 2 READ THE INSTRUCTIONS Attention! You are advised to read all the instructions in this manual carefully; it will inform you about the right conditions for the proper, safe use of your washer-dryer It is very important to keep this instruction manual with the appliance for future reference. In th...

Page 5 - Do not store flammable fluids near the appliance.; Lengthy periods out of use.; fused plug, to change a fuse in; The manufacturer declines all responsibility

EN 4  Fabric softeners, or similar products, should be used as specified by the fabric softener instruc-tions.  The final part of a tumble dryer cycle occurs without heat (cool down cycle) to ensure that the items are left at a temperature that ensures that the items will not be changed  Never st...

Page 6 - INSTALLATION INSTRUCTIONS; all

EN 5 2. INSTALLATION INSTRUCTIONS Important! The appliance must be installed by a qualified engineer in compliance with the relevant regulations. The washer-dryer is heavy. Take care when lifting it. 2.1 UNPACKING The unit on flexible mounts is fixed in place for transport using the screws ( A) on t...

Page 7 - POSITIONING AND LEVELLING; Place the appliance in the; adjustable rear feet

EN 6 2.2 POSITIONING AND LEVELLING 1. Place the appliance in the chosen position. 2. Level the appliance carefully in all directions with the aid of a spirit level, adjusting the height of the feet if necessary. Once done, fix the feet in place with the locknuts pro-vided. 3. On appliances with adju...

Page 8 - CONNECTING TO THE WATER SUPPLY

EN 7 2.3 CONNECTING TO THE WATER SUPPLY 1. Check that the water supply pressure is in the following range: 0,05-0,9MPa . With higher pressures, use a pressure reducer. 2. Connect the cold water supply hose ( blue screw collar) to the cold water tap with ¾ gas threaded connector, taking care to tight...

Page 9 - DESCRIPTION OF CONTROLS; Programme Selector

EN 8 3. DESCRIPTION OF CONTROLS 3.1 CONTROL PANEL All the appliance's control and monitoring devices are placed together on the front panel. Programme Selector For switching the washer-dryer on and off and selecting pro-grammes. Can be turned in ei-ther direction. Does not turn while programmes are ...

Page 10 - USING THE APPLIANCE FOR WASHING; PREPARING THE ITEMS FOR WASHING; Do not wash unhemmed or torn items as they may fray.; Wool; – Only wool marked as pure new wool, with the; OPENING THE DOOR; pending on the temperature reached inside the appliance.; LOADS OF WASHING; to save electricity, it is more economical to wash complete

EN 9 4. USING THE APPLIANCE FOR WASHING 4.1 PREPARING THE ITEMS FOR WASHING 1. Subdivide the items for washing by fabric type and colour fastness. 2. Wash white and coloured items separately. New coloured items should be washed separately the first time. Normally, items carry labels with washing ins...

Page 11 - LOADING THE ITEMS FOR WASHING; loaded with up to 7kg; ADDING DETERGENT AND ADDITIVE; Never fill with liquids above the maximum level marked

EN 10 4.4 LOADING THE ITEMS FOR WASHING 1. Open the door and load the laundry, distributing it evenly over the drum, with items opened out and not bundled together; if possible, large and small items should be well mixed. 2. The washing machine covered by this manual can be loaded with up to 7kg of ...

Page 12 - POWDER DETERGENT DOSES; Laundry with normal dirt; ⁄4 of the detergent in the wash compartment.; LIQUID DETERGENT DOSES; all programmes without prewash.; PROGRAMMES AND FUNCTIONS

EN 11 4.6 POWDER DETERGENT DOSES Laundry with normal dirt 1. Choose a programme without prewash. 2. Pour the total amount of detergent shown on the pack into the main was h compartment of the detergent drawer. Very dirty laundry 1. Choose a programme with prewash. 2. Place ¼ of the recommended amoun...

Page 13 - button underneath the sequence of spin speeds and temperatures.; Time to end

EN 12 4.10 SWITCHING ON THE APPLIANCE AND SELECTING THE WASHING PROGRAMME To switch on the appliance and select the programme, proceed as follows: 1. Turn the programmes knob in either direction. This switches on the washer-dryer. 2. Select the washing programme. The time left to the end of the prog...

Page 14 - SELECTING AND CONFIRMING OPTIONS; Option selection; Options; Start Pause

EN 13 4.11 SELECTING AND CONFIRMING OPTIONS 1. The Option Selection button can be used to select the following options in sequence (from the top down): Prewash : adds a stage before the main wash, lasting about 20 minutes at a temperature of 35°C. Sui ta- ble for loads of particularly dirty items. I...

Page 15 - mains constantly lit.; STARTING THE WASHING PROGRAMME; Start Pause symbol on the display is constantly on.; Time to end button

EN 14 4.12 TIME TO END 1. The Time to End key can be pressed repeatedly to select the time after which the washing programme will end. The time to end of cycle function calculates the initial duration of the washing/drying cycle, the settings made (temperature, spin speed and options) which may shor...

Page 16 - INTERRUPTING OR CHANGING THE WASHING PROGRAMME; Switch the appliance off by turning the programmes knob to OFF; (spin speed set as; Child Lock Symbol

EN 15 4.14 INTERRUPTING OR CHANGING THE WASHING PROGRAMME The washing programme in progress can be interrupted at any moment: 1. press the “Start/Pause” button for about 3 seconds: the display shows the word PAUS (for 1 second) al-ternating with the time remaining until the end of the cycle (for 1 s...

Page 17 - OPENING THE APPLIANCE IN AN EMERGENCY; Pull the lever down and open the door.; Warning, scolding hazard; : do not open the door using the emergency release

EN 16 4.17 OPENING THE APPLIANCE IN AN EMERGENCY In the event of a power failure, the door is opened using the mechanical release device activated by means of the lever in the bottom of the appliance:  Turn the knob to Off and disconnect the power supply plug from the socket.  Drain off the water ...

Page 18 - USING THE APPLIANCE FOR DRYING; Attention; withstand the selected temperature.; EXTRA DRYING; : do not over-dry as this may cause creases or shrinkage of garments.

EN 17 5. USING THE APPLIANCE FOR DRYING 5.1 GENERAL During drying cycles, the water tap must be turned on and the drain hose correctly positioned. This appliance can be set to perform wash only, dry only and wash-and-dry programmes. In the wash-and-dry programme, the appliance switches from washing ...

Page 19 - proceed as follows:; DRY ONLY PROGRAMME; drying symbol LED lights up.; INTERRUPTING OR CHANGING THE DRYING PROGRAMME; Drying symbol

EN 18 5.2 WASH-AND-DRY PROGRAMME Automatic washing and drying can be carried out in the tough fabrics (cotton and colours) and synthetic/delicate fabrics programmes. If the wool wash programmes are selected, automatic drying after the wash cannot be set. For automatic washing and drying, the load of...

Page 20 - a. Make sure that the drum is completely empty and close the door.; Press the START/PAUSE button; CLEAN programme symbol

EN 19 5.5 CLEAN PROGRAMME To keep the appliance operating at peak efficiency over time, it has a CLEAN programme for regular cleaning of the drying circuit to remove any fluff deposits. 1. After a given number of drying cycles, the CLEAN symbol lights up on the display to warn that this pro- gramme ...

Page 21 - CLEANING AND MAINTENANCE; from the power supply socket.; CLEANING THE OUTSIDE OF THE APPLIANCE; Regular, thorough cleaning will keep your appliance looking good.; CLEANING THE DRUM; – use a small screw-

EN 20 6. CLEANING AND MAINTENANCE Important – Before carrying out any cleaning or maintenance procedure, the plug must be disconnected from the power supply socket. 6.1 CLEANING THE OUTSIDE OF THE APPLIANCE  Regular, thorough cleaning will keep your appliance looking good.  Clean the exterior of t...

Page 22 - CLEANING THE DETERGENT DRAWER

EN 21 3. Extract the drain hose ”A”. Warning: if the hose is hot, the water is hot or boiling hot. Place a shallow container on the flo or and remove the plug “B” to drain off the water. Depending on the amount of water in the appliance, the container may have to be emptied several times. When no mo...

Page 24 - Appliance does not spin; ERROR DISPLAY; Error code

EN 23 11 Appliance does not spin Anti-imbalance safety device tripped because laundry not evenly distrib-uted in drum. If laundry is still wet at end of cycle, rearrange it in the drum by hand and repeat spin programme only. 12 Emptying water from drum In the event of a power blackout or appliance f...