Smeg UKC7280NEP1- Manuals

Disposal WARNING! Risk of injury or suffocation. • Disconnect the appliance from the mains supply. • Cut off the mains cable and discard it. • Remove the door to prevent children and pets to be closed inside of the appliance. • The refrigerant circuit and the insulation materials of this appliance a...

Current temperature indicator blinks. Any time you touch the temperature regulator, the setting moves by one position. The corresponding LED blinks for a while. 2. Touch the temperature regulator until the required temperature is selected. FastFreeze function You can activate FastFreeze function by ...

Do not move the glass shelf above the vegetable drawer to ensure correct air circulation. Fan function The Fan function lets the food cool quickly and keeps more uniform temperature in the compartment. Switch on the Fan when the ambient temperature exceeds 25°C. Press the switch (A) to switch on the...

Cold accumulators The freezer contains at least one cold accumulator which increases storage time in the event of a power cut or breakdown.This shall be placed on top of the frozen food in the front part. Frozen Food Calendar The symbols show different types of frozen goods.The numbers indicate stor...

• the maximum quantity of food which can be frozen in 24 hours is shown on the rating plate; • the freezing process takes 24 hours no further food to be frozen should be added during this period; • freeze only top quality, fresh and thoroughly cleaned, foodstuffs; • prepare food in small portions to...

This operation will improve the performance of the appliance and save electricity consumption. Defrosting of the refrigerator Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, during normal use. The defrost water drains out t...

Problem Possible cause Solution Temperature cannot be set. The "FastFreeze function" is switched on. Switch off "FastFreeze func‐ tion" manually, or wait until the function resets automatically to set the temperature. Refer to "FastFreeze function". The temperature in the ap‐...

class indicated on the rating plate of the appliance. Cli‐ mate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Some functional problems might occur for some types of models when operating outside of that range. The correct operation can only be gu...

Ventilation requirements The airflow behind the appliance must be sufficient. 5 cm min. 200 cm 2 min. 200 cm 2 CAUTION! Refer to the assembly instructions for the installation. TECHNICAL DATA Technical data Dimensions of the recess Height mm 1780 Width mm 560 Depth mm 550 Rising time Hours 20 Voltag...