Smeg STL 60- Manuals

Smeg STL 60– Manual in PDF format online.

Manuals:

Manual

Manual Smeg STL 60

Summary

Page 3 - CONTENTS

CONTENTS BEFORE USING THE WASHING MACHINE FIRST WASH CYCLE PRECAUTIONS AND GENERAL RECOMMENDATIONS DESCRIPTION OF THE WASHING MACHINE PREPARATION OF THE WASHING DETERGENTS AND ADDITIVES PROGRAMME SELECTION CLEANING THE FOREIGN BODY TRAP DRAINING RESIDUAL WATER CARE AND MAINTENANCE TROUBLESHOOTING GU...

Page 4 - BEFORE USING THE WASHING MACHINE; Remove the packaging and check; Remove the transport bracket; Electrical connection

GB 2 BEFORE USING THE WASHING MACHINE 1.Remove the packaging and check a. Cut and remove the shrink-wrap.b. Remove the top protection and the protective corners. c. Remove the bottom protection by tilting and turning the washing machine on one rear bottom corner. d. Open the lid by pressing it sligh...

Page 5 - FIRST WASH CYCLE; Disposing of packaging and old washing

GB 3 FIRST WASH CYCLE PRECAUTIONS AND GENERAL RECOMMENDATIONS 1.Packing • The packaging materials are 100% recyclable and bear the recycling symbol . Adhere to local regulations when disposing of packaging material. 2.Energy saving tips • Achieve the best use of energy, water, detergent and time by ...

Page 6 - Sort the laundry; Dyeing and bleaching; Starching

GB 4 DESCRIPTION OF THE WASHING MACHINE PREPARATION OF THE WASHING Sort the laundry 1. Sort the laundry according to…• Type of fabric / care label symbol Cottons, mixed fibres, easy care/synthetics, wool, handwashed items. • Colour Separate whites and coloureds. Wash new coloured items separately. •...

Page 7 - Loading the laundry; Place the items of laundry in the drum one by one

GB 5 Loading the laundry 1. Open the machine lid. 2. Open the drum by pressing the small flap (2a) or the push button (2b) - depending on model - and holding the large flap. For the drum opening shown on 2c, you just have to press the push button, without holding the large flap. 3. Place the items o...

Page 8 - DETERGENTS AND ADDITIVES; Choice of the right detergents and additives

GB 6 DETERGENTS AND ADDITIVES Choice of the right detergents and additives The type of detergent depends on:• type of fabric (cottons, easy care/synthetics, delicate items, wool).Note: use only specific detergents for wool. • colour;• washing temperature;• degree and type of soiling.Notes:Whitish re...

Page 9 - PROGRAMME SELECTION

GB 7 PROGRAMME SELECTION Preparation of wash cycle 1. Load the machine, close the drum flaps and check that they are properly locked.2. Add detergents and additives into the dispenser to no more than the “MAX” level mark. Please refer to “Detergents and additives”. 3. Turn the programme selector kno...

Page 10 - CLEANING THE FOREIGN BODY TRAP; Insert the foreign body trap again and screw it

GB 8 CLEANING THE FOREIGN BODY TRAP The washing machine is provided with a self-cleaning pump. The foreign body trap keeps objects like buttons, coins, safety-pins etc. which have been left in the laundry.1. Unplug the washing machine.2. Open the foreign body trap cover with a coin.3. Place a bowl b...

Page 11 - Open the foreign body trap, let the water drain into a small; Release the drain hose then open the fixing clip located at the; Detergent dispenser; Wash the dispenser using running water.; Replace the dispenser by locating the bottom tabs in the lid

GB 9 DRAINING RESIDUAL WATER CARE AND MAINTENANCE When should I drain residual water (draining problem)?• Before transporting (moving) the machine.• If the washing machine is installed in a room subject to sub- zero temperatures. It is best in this case to drain the machine after every wash. 1. Stop...

Page 12 - Water inlet hose filter

GB 10 Water inlet hose filter Check and clean regularly (at least two or three times a year). 1. Unplug the washing machine. 2. Turn off the tap. 3. Unscrew the hose from the tap. 4. Carefully clean the filter located at the end of hose, without assembling it, for example with a tooth-brush.Note: Fo...

Page 13 - TROUBLESHOOTING GUIDE; • the Water stop could be activated (see “Water; • the foreign body trap in the water inlet hose is

GB 11 Washing machine exterior and control panel • Clean with a soft damp cloth.• If necessary, a neutral household cleaner can be applied (do not use aggressive or abrasive products). Lid seal • Clean from time to time with a damp cloth. Water inlet hose(s) • Check the hose regularly for brittlenes...

Page 15 - TRANSPORT AND HANDLING

GB 13 AFTER-SALES SERVICE Before contacting After-Sales Service: 1. Try to remedy the problem yourself (see “Troubleshooting Guide”). 2. Restart the programme to check whether the problem has solved itself. 3. If the machine continues to function incorrectly, call After-Sales Service. Specify: • The...

Page 16 - INSTALLATION; Removal of transport bracket; Replace the four outer screws B on the machine and

GB 14 INSTALLATION Removal of transport bracket The washing machine is fitted with a transport bracket to avoid any possible damage during transport.Before using the washing machine, the transport bracket at the back MUST be removed.1. Unscrew the two screws A and the four screws B with a flat screw...

Page 17 - Adjust the feet; Adjust the height of the foot by hand.; Connect the water inlet hose.; Carefully screw the water inlet hose onto the tap by hand.

GB 15 Adjust the feet Install the washing machine on a level surface, near to electrical, water and drain connections.If the floor is uneven, adjust the feet (do not insert pieces of wood, cardboard etc. under the feet):1. Loosen the locknut using the wrench provided. 2. Adjust the height of the foo...

Page 18 - Water stop anti-flooding system; Connect the water drain hose

GB 16 Water stop anti-flooding system (depending on model) • Screw the hose to the water supply tap. Turn the tap fully on and check the water-tightness of the connection. • The washing machine must not be connected to the mixing tap of a non-pressurized water heater! • The inlet hose and the plasti...

Page 19 - ELECTRICAL CONNECTION; Valid Only For Great Britain And Ireland; a. The GREEN AND YELLOW wire must be connected; b. The BLUE wire must be connected to the terminal; c. The BROWN wire must be connected to the terminal; Fuse replacement

GB 17 ELECTRICAL CONNECTION Do not use extension leads or multi sockets.Electrical connections must be made in accordance with local regulations.1) Warning - this appliance must be earthedThis appliance is normally supplied with a mains lead having a plug fitted in the factory which has been checked...