Smeg SFR30- Manuals

Page 2 - DEEP FAT FRYER DESCRIPTION

TYPE: FD30 14 1 Heating resistance 2300 W 2 Fryer kettle 3 Fryer control knob 4 Appliance on/off indicator lamp Caution: this appliance is designed for personal household use only. DEEP FAT FRYER DESCRIPTION

Page 3 - ) SWITCHING ON THE FRYER; USE

1) SWITCHING ON THE FRYER The fryer is controlled by a thermostat and it can beswitched on by turning the knob clockwise to theposition desired (see fig. 1). A red indicator lampindicates it is switched on. Automatic cut-off switch The appliance is provided with a cut-off device whichintervenes if t...

Page 4 - Never put out a fire with water!

16 USE CAUTIONS FOR FRYING Only oil or vegetable fat should be used for frying. Amount of oil / fat min. 2 - max. 2.5 l. Avoid mixing different types of oil / fat. It is importantto fry at the right temperature for good results. · Temperature too low: the food to be fried cooks too slowly and absorb...

Page 5 - CLEANING; ) CLEANING THE FRYER

17 CLEANING 2) CLEANING THE FRYER With the proper care the fryer will maintain its shine for a long time and will be easier to clean. U s e a s p o n g e , w a t e r a n d s o a p ( o r a p r o d u c t available on the market) to clean stainless steel parts, but only when the appliance is cool. Then...

Page 6 - INSTALLATION; ) INSTALLING THE FRYER

18 INSTALLATION T E C H N I C A L D ATA F O R I N S TA L L E R S Installation and maintenance listed in this sectionmust only be carried out by qualified personnel(law n° 46 and D.P.R. 447). A f a u l t y i n s t a l l a t i o n c a n c a u s e d a m a g e t opersons, animals or objects, towards who...

Page 7 - ) SECURING THE FRYER

4) SECURING THE FRYER To secure the fryer to the worktop the fasteningc l a m p s a c c o m p a n y i n g t h i s b o o k l e t m u s t b eassembled. The following procedures must becarried out to do this: · remove all movable parts from the fryer; · turn the appliance over taking care to place it o...

Page 8 - ) ELECTRICAL CONNECTIONS

20 5) ELECTRICAL CONNECTIONS The electrical connection must be made in c o n f o r m i t y w i t h c u r r e n t r u l e s a n dregulations. Before making a connection, check that: - T h e c a p a c i t y a n d o u t l e t s o f t h e e l e c t r i c a l installation are suitable for the maximum pow...

Page 9 - Name; TYPE AND SECTION OF POWER CABLES; MAINTENANCE

Name W 21 Heating resistance 2300 TYPE AND SECTION OF POWER CABLES 2300 W 3 X 1.5 mm 2 (*) ELECTRICAL COMPONENTS OUTPUT MAINTENANCE Before carrying out maintenance of any kind,disconnect the appliance from the mains. Allmaintenance must be carried out by authorizedpersonnel only. 6) PART REPLACEMENT...

Page 10 - TECHNICAL SPECIFICATIONS; DEEP FAT FRYER

22 TECHNICAL SPECIFICATIONS DEEP FAT FRYER Voltage 230 – 240 V ~ Frequency 50/60 Hz Total nominal power 2300 W

Page 11 - TECHNICAL ASSISTANCE AND SPARE PARTS

23 TECHNICAL ASSISTANCE AND SPARE PARTS Before leaving the factory, this equipment was tested and adjusted by skilled personnel so as to guarantee the best operating results. Original spare parts can only be found at our technical service centres and authorized stores. Every repair or adjustment nec...