Smeg SFA4390MX - Manuals

Instructions 8 Our appliances are packed in non-polluting and recyclable materials.• Deliver the packing materials to the appropriate recycling centre. 1.7 This user manual This user manual is an integral part of the appliance and must therefore be kept in its entirety and within the user’s reach fo...

Description 9 EN 2 Description 2.1 General Description 1 Control panel 2 LH Light bulb 3 RH Light bulb (on some models only) 4 Seal 5 Door 6 Rack/tray support frames Frame shelf

Description 10 2.2 Control panel Temperature knob (1) This knob is used to select:• Microwave power level• Cooking temperature • Function's duration• Programmed cooking procedures• Current time• Switching on or off of the appliance internal lamp. Display (2) Displays the current time, the selected c...

Description 11 EN 2.4 Microwaves The appliance is equipped with a microwave generator called a magnetron. The microwaves generated are evenly emitted into the oven compartment in order to reach the food and heat it.Heating takes place through the process of friction between the molecules contained w...

Use 12 3 Use 3.1 Instructions Materials suitable for microwaves In general, in order for the food to be reached, the materials used for microwave cooking must be transparent to microwave energy.Below is a table of materials to use and those not to use: High temperature inside the oven during use Dan...

Use 13 EN Testing dishes To check whether or not cookware is suitable for use with microwave cooking carry out this simple test:1. Remove all accessories from the oven compartment. 2. Place the cookware to be tested into the oven compartment. 3. Select the maximum power level (e.g. 1000W). 4. Set a ...

Use 14 3.3 Using the accessories Racks and trays Racks and trays have to be inserted into the side guides until they come to a complete stop.• The mechanical safety locks that prevent the rack from being taken out accidentally have to face downwards and towards the oven back. Baker Plate The Baker p...

Use 15 EN Boiling Rod When using the microwave to heat or reheat liquids, the boiling process may be delayed. To avoid this dangerous phenomenon, it is necessary to insert the supplied boiling rod (or a heat-resistant plastic spoon) in the container while heating. 3.4 Using the oven Display Clock in...

Use 16 Operating modes Stand-by: When no function is selected, the display shows the current time and the symbol . ON : When any function starts the display shows the current settings such as temperature, duration, microwave power level and the temperature level reached. Each time the temperature kn...

Use 17 EN Setting the time On the first use, or after a power failure, will be flashing on the appliance's display. To be able to start any cooking function, the current time must be set.1. Turn the temperature knob to set the hour displayed (to increase or decrease more quickly keep the knob turned...

Use 18 Microwave: 1. Select the microwave function using the function knob. 2. Press the temperature knob. 3. Turn the temperature knob to change the cooking time (max 30 minutes). 4. Press the temperature knob. 5. Turn the temperature knob to change the power level from 100W to 1000W (see Microwave...

Use 19 EN Microwave power levels Below is a list of the power levels that can be selected: QUICK START microwave function 1. From stand-by mode press the function knob twice. 2. The appliance will start the microwave oven with the default settings. Combination Microwave + grill function 1. Select th...

Use 20 Grill Function 1. Select the Grill function with the function knob. 2. Press the temperature knob. 3. Turn the knob to set the temperature. 4. Press the function knob to start combination cooking. Pre-heating stage In the grill function, cooking itself is preceded by a preheating stage, which...

Use 22 Programmed cooking (only for grill function) 1. After selecting a cooking function and temperature, press the temperature knob three times. The display shows and the indicator light flashes. 2. Turn the knob to set the cooking time (from 00:01 a 12:59). Keep the knob turned to produce a faste...

Use 23 EN 3.6 Special functions Heating 1. Press the function knob to select the re- heating function. 2. Press the temperature knob. 3. Turn the temperature knob to change the re-heating time. 4. Press the function knob to confirm the settings and start re-heating. Baker 1. Position the rack on the...

Use 24 5. Press the function knob to confirm the parameters and start preheating the Baker plate without food. 6. When preheating has finished, the appliance will wait for food to be inserted. 7. Position the food inside the Baker plate. 8. Press the function knob to restart cooking. 9. On completio...

Use 25 EN Timed defrosting 1. Place the dish into the oven compartment (see “Turn” procedure). 2. Use the function knob to select timed defrosting as indicated by the and symbols. 3. Press the temperature knob to change the defrosting time. 4. Turn the knob to set the defrosting time (from 5 minute ...

Use 26 Pre-set parameters: “Turn” procedure For best defrosting results it is recommended, when necessary, to turn the dish inside the oven compartment.1. Put the dish in the oven placing it parallel to the door. 2. When the word “Turn” is displayed it is necessary to turn the dish. 3. Open the door...

Use 28 Showroom mode (for exhibitors only): This mode allows the appliance to deactivate all heating elements, while keeping the control panel active. To use the appliance normally, set this mode to OFF . Low Power mode: This mode allows the appliance to limit the power used. Suitable for simultaneo...

Cleaning and maintenance 29 EN 4 Cleaning and maintenance 4.1 Instructions 4.2 Cleaning the surfaces To keep the surfaces in good condition, they should be cleaned regularly after use. Let them cool first. 4.3 Ordinary daily cleaning Always use only specific products that do not contain abrasives or...

Cleaning and maintenance 30 3. Dry the cooking compartment with a soft cloth 4. Leave the door open as long as necessary to ensure that the cooking compartment dries completely. 4.6 Cleaning the door glazing The glass in the door should always be kept thoroughly clean. Use absorbent kitchen roll. In...

Cleaning and maintenance 31 EN Cleaning the top of the compartment The appliance is equipped with a tilting grill element that allows for easy cleaning of the upper part of the oven compartment.1. Free the upper heating element by gently lifting it and rotating its retaining latch by 90 degrees. 2. ...

Installation 32 5 Installation 5.1 Electrical connection General information Check the grid characteristics against the data indicated on the plate.The identification plate bearing the technical data, serial number and brand name is visibly positioned on the appliance.Do not remove this plate for an...

Installation 33 EN 5.3 Positioning Fastening bushings Remove the bushing covers inserted on the oven front. Mount the appliance into the recess. Secure the appliance to the piece of furniture using screws. Cover the bushings with the covers removed previously. Appliance overall dimensions (mm) Heavy...