Page 2 - Warnings; General Safety
2 - EN 1 Warnings General Safety • Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. This may cause problems with your washing machine. • If the power cable or mains plug is damaged you must call Authoriz...
Page 3 - Installation
3 - EN 2 Installation Removing packaging reinforcement Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Opening the transportation locks A Transportation safety bolts must be removed before operating the washing machine! Otherwise, the...
Page 4 - Electrical connection; Initial preparations for; Preparing clothes for washing
4 - EN • The maximum length of the combined hoses must not be longer than 3.2 m. Electrical connection Connect the machine to an earthed outlet protected by a fuse of suitable capacity. Important: • Connection should comply with national regulations. • The voltage and the allowed fuse protection are...
Page 5 - Selecting a program and operating your machine; Turning the machine on
5 - EN 4 Selecting a program and operating your machine Control panel 1 - Spin Speed Adjustment Knob * 2 - Temperature Adjustment Knob * 3 - Start/Pause/Cancel Button 4 - Auxiliary Function Buttons 5 - Program Selection Knob Turning the machine on You can prepare the machine for program selection by...
Page 6 - Additional programs; Special programs
6 - EN vigorous washing movements during a longer washing cycle. • Sintetici (Synthetics) You can wash your less durable clothes on this program. Gentler washing movements and a shorter washing cycle is used compared to the “Cottons” program. It is recommended for your synthetic clothes (such as shi...
Page 7 - Program selection and consumption table
7 - EN Program selection and consumption table • : Selectable * : Automatically selected, not cancellable. **: Energy Label programme (EN 60456) Water and power consumption and programme duration may differ from the table shown, subject to changes in water pressure, water hardness and temperature, a...
Page 9 - Maintenance and cleaning
9 - EN This function protects the appliance from being tampered by children. In this case, all of the buttons are inactive except On/Off button; by On/Off button you can whether stop or resume (while child-lock on) the program of your machine. The machine is switched to child-lock by pressing the 1s...
Page 11 - Solution suggestions for problems
11 - EN 6 Solution suggestions for problems Problem Cause Explanation / Suggestion Program cannot be started or selected. Machine may have switched to self protection mode due to an infrastructure problem (such as line voltage, water pressure, etc.). Reset your machine by pressing “Start/Pause/ Canc...
Page 12 - Specifications; Models
12 - EN LBS85-9 LBS65-9 5 5 84 84 60 60 54 54 61 61 230 V / 50Hz 10 10 2300 800 600 7 Specifications Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly. Values stated on the mac...