Smeg LBS65- Manuals

Page 2 - Warnings; General Safety

2 - EN 1 Warnings General Safety • Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. This may cause problems with your washing machine. • If the power cable or mains plug is damaged you must call Authoriz...

Page 3 - Installation

3 - EN 2 Installation Removing packaging reinforcement Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Opening the transportation locks A Transportation safety bolts must be removed before operating the washing machine! Otherwise, the...

Page 4 - Electrical connection; Initial preparations for; Preparing clothes for washing

4 - EN too long you may have it shortened. • The maximum length of the combined hoses must not be longer than 3.2 m. Electrical connection Connect the machine to an earthed outlet protected by a fuse of suitable capacity. Important: • Connection should comply with national regulations. • The voltage...

Page 5 - Selecting a program and operating your machine; Control panel

5 - EN 4 Selecting a program and operating your machine Control panel 1 - Spin Speed Adjustment Knob * 2 - Temperature Adjustment Button * 3 - Start/Pause/Cancel Button 4 - Auxiliary Function Keys 5 - Program Selection Knob Turning the machine on You can prepare the machine for program selection by ...

Page 7 - Program selection and consumption table

7 - EN Program selection and consumption table • : Selectable * : Automatically selected, not cancellable. **: Energy Label programme (EN 60456) Water and power consumption and programme duration may differ from the table shown, subject to changes in water pressure, water hardness and temperature, a...

Page 8 - Switching the machine to standby

8 - EN Auxiliary functions Auxiliary function selection keys Select the required auxiliary functions before starting the program. C Auxiliary function buttons may differ according to the model of your machine. Auxiliary function selection If an auxiliary function that should not be selected together...

Page 9 - Maintenance and cleaning

9 - EN cancelled or selected in accordance with the step the program is at. The door can be opened if the water level is suitable. Laundry may be added / taken out by opening the door. Child-proof lock You can protect the appliance from being tampered by children by means of the child- proof lock. I...

Page 11 - Solution suggestions for problems

11 - EN 6 Solution suggestions for problems Problem Cause Explanation / Suggestion Program cannot be started or selected. Machine may have switched to self protection mode due to an infrastructure problem (such as line voltage, water pressure, etc.). Reset your machine by pressing “Start/Pause/ Canc...

Page 12 - Specifications; Models

12 - EN 7 Specifications Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly. Values stated on the machine labels or in the documentation accompanying it are obtained in laborato...