Smeg KTL6- Manuals

GB 6 Loading the laundry 1. Open the machine lid by pulling it upwards. 2. Open the drum by pressing the push button (pictures “1a” or “1b” - depending on model). 3. Place the items of laundry into the drum one by one. Do not exceed the maximum load of the programmes indicated in the separate progra...

GB 7 DETERGENTS AND ADDITIVES Choice of the right detergents and additives The type of detergent depends on: • type of fabric (cottons, easy care/synthetics, delicate items, wool).Note: use only specific detergents for wool. • colour; • washing temperature; • degree and type of soiling. Notes: • Do ...

GB 8 Using chlorine bleach • Wash your laundry in the desired programme (Cotton, Synthetics), adding an appropriate amount of chlorine bleach to the SOFTENER chamber (close the lid carefully). • Immediately after end of programme, start the “Rinse and Spin” programme to eliminate any residual bleach...

GB 10 CARE AND MAINTENANCE Detergent dispenser Clean the detergent dispenser regularly, at least three or four times a year, to prevent detergent build-up: 1. Push in the buttons on each side of the dispenser. 2. Pull the dispenser towards you and remove it. A small quantity of water can remain in t...

GB 11 Appliance exterior and control panel • Clean with a soft damp cloth. • If necessary, a neutral household cleaner can be applied (do not use aggressive or abrasive products). Appliance interior • After each washing, leave the lid open for some time to allow the inside of the appliance to dry. •...

GB 12 TROUBLESHOOTING GUIDE Your washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and allow you to react appropriately. These faults are frequently so minor that they can be removed within a few minutes. Problem Causes, Solutions, Tips Ap...

GB 13 Description of red indications Red indication lamp lights up Indication on display (if fitted on your machine) Description Causes Solutions “Water tap closed” Appliance has no or insufficient water supply. The “Start/Pause” light flashes. Check whether:• Water tap is fully open and water suppl...

GB 15 AFTER-SALES SERVICE Before contacting After-Sales Service: 1. Try to remedy the problem yourself (see “Troubleshooting Guide”). 2. Restart the programme to check whether the problem has solved itself. 3. If the machine continues to function incorrectly, call After-Sales Service. Specify: • The...

GB 16 INSTALLATION Removal of transport bracket The washing machine is fitted with a transport bracket to avoid any possible damage during transport.IMPORTANT: Before using the washing machine, the transport bracket at the back MUST be removed. 1. Unscrew the two screws “A” and the four screws “B” w...

GB 17 Adjust the feet Install the washing machine on a level surface, near to electrical, water and drain connections.If the floor is uneven, adjust the feet (do not insert pieces of wood, cardboard etc. under the feet):1. Loosen the locknut using the wrench provided.2. Adjust the height of the feet...

GB 18 Water stop anti-flooding system (see inlet hose type as shown on the right - depending on model) • Screw the hose to the water supply tap. Turn the tap fully on and check the water-tightness of the connection. • The washing machine must not be connected to the mixing tap of a non-pressurized w...

GB 19 ELECTRICAL CONNECTION Do not use extension leads or multi sockets.Electrical connections must be made in accordance with local regulations. 1) Warning - this washing machine must be earthedThis washing machine is normally supplied with a mains lead having a plug fitted in the factory which has...

GB KTL 6 5019 612 10138 Programme Care Labels Max. Load kg Type of wash / Notes - for temperature selection, respect the manufacturer's recommendations on the care label Detergents and Additives Special options Max. Spin Speed rpm Pre- wash Main Wash Softener Start delay Avvio ritardato Pre- wash Pr...