Smeg KSED95XE- Manuals

Page 3 - WARNINGS; INSTALLATION; • Read the instructions closely before installing and/or using the; OPERATION

EN 1 WARNINGS ! INSTALLATION • Read the instructions closely before installing and/or using the hood. • The manufacturer will not be held liable for damage caused by installation that is incorrect or not up to standard. • We recommend that all installation and adjustment procedures are carried out b...

Page 4 - ATTENTION; MAINTENANCE; • THE MANUFACTURER DECLINES ALL RESPONSIBILITY IF THE

EN 2 been given instructions on safe use of the appliance and are familiar with the dangers it entails. • Children must be supervised to ensure that they do not play with the appliance • “ ATTENTION : The accessible parts can become very hot if they are used with cooking equipment." MAINTENANCE ...

Page 5 - INSTALLATION INSTRUCTIONS:

EN 3 INSTALLATION INSTRUCTIONS: The hood is supplied with all the accessories necessary for its installation. The minimum distance between the lower surface of the hood and the hob must be at least 750 mm for gas hobs and 650mm for electric hobs (Fig. 1 ). If the motor inlet is equipped with a non-r...

Page 6 - • ELECTRIC CONNECTION

EN 4 FILTER version: Leave the motor inlet free. Install the active carbon filters as shown on page 8. If the hood is not supplied with an active carbon filter you must buy it separately at your nearest authorised Smeg dealer. For some models there is a standard set of fittings (fig.5) to be fixed t...

Page 7 - ELECTRO-MECHANICAL PUSHBUTTON; Motor OFF key; • CONTROLS UNIT; Timed intensive speed:

EN 5 USER INSTRUCTIONS: SLIDER: - Slider (A) lighting ON/OFF - Slider (B) with four positions: Pos.0: Motor OFF Pos1/2/3: ON/Speed selection ELECTRO-MECHANICAL PUSHBUTTON PANEL: Lights ON/OFF key Motor OFF key Power key/hood speed selection KNOBS: - Knob (A): lighting ON/OFF (0-1) - Knob (B): 0 Moto...

Page 8 - speed timer has expired it returns to the third speed by default.; Control panel

EN 6 speed timer has expired it returns to the third speed by default. Control panel 2-DIGIT 10-KEY CAPACITIVE PUSHBUTTON BOARD: Key Function Display A Turns the suction motor on / off. Displays the set speed B Decreases the operation speed. Displays the set speed C Increases the operation speed. Di...

Page 9 - SOFT TOUCH ELECTRONIC PUSHBUTTON BOARD:; Motor speed OFF/1 key

EN 7 Keyboard lock command: you can lock the keyboard, for example, to clean the glass surface, when the Hood has the motor and lights switched off. By pressing key D for about 5 seconds, you can enable or disable the keyboard lock which is always confirmed with: The timed intensive function is that...

Page 10 - above the pressed button flashing.; FILTER CLEANING SIGNAL; FUNCTIONS AND MAINTENANCE:

EN 8 the intensive speed timer has expired it returns to the third speed by default. Before performing any maintenance and/or cleaning always disconnect the hood from the power supply Regular cleaning guarantees good operation and a long appliance service life. The grease filters and filter hoods wi...

Page 11 - until the carbon reaches saturation level; METAL FILTER CLEANING:

EN 9 Particular attention should be paid to the metal grease filter panels. The accumulation of grease inside the filter panels as well as affecting the performance of the extractor, can also create a fire hazard. In order to minimise the risk of fire, the filters must be cleaned regularly, at least...

Page 14 - WARRANTY AND TECHNICAL ASSISTANCE SERVICE:; The; is provided in the hood packaging as; Smeg Warranty Booklet; for complete and comprehensive; connection fee plus 35 cent per min from mobile phones.; In case of failure, call

EN 12 WARRANTY AND TECHNICAL ASSISTANCE SERVICE: The Smeg Warranty Booklet is provided in the hood packaging as well as in the Instructions for Use and Maintneance. We invite you to read the Smeg Warranty Booklet for complete and comprehensive information on the warranty. * the cost for the call is ...