Page 3 - USE THE QUICK GUIDE PAGE LABELS TO SEARCH OUT INFORMATION FAST!; Contents
SE T U P EL EC TR IC A L M A INTEN A N CE SE RV IC E PA RT S O PE R ATIONS SA FE T Y IN TR O DUCT IO N USE THE QUICK GUIDE PAGE LABELS TO SEARCH OUT INFORMATION FAST! INTRODUCTION...................................... 2 Woodstock Technical Support .................. 2 Machine Specifications ...........
Page 4 - INTRODUCTION
-2- Model W1846 (For Machines Mfd. Since 6/17) IN TR O DU CT IO N Woodstock.Technical.Support This machine has been specially designed to provide many years of trouble-free service. Close attention to detail, ruggedly built parts and a rigid quality control program assure safe and reliable operation...
Page 5 - BENCHTOP OSCILLATING SPINDLE SANDER
-3- Model W1846 (For Machines Mfd. Since 6/17) IN TR O DUCT IO N Model W1846 Machine Specifications, Page 1 of 2 MODEL W1846 BENCHTOP OSCILLATING SPINDLE SANDER Product Dimensions Weight........................................................................................................... 46 lbs...
Page 7 - Identification
-5- Model W1846 (For Machines Mfd. Since 6/17) IN TR O DUCT IO N Identification Become familiar with the names and locations of the controls and features shown below to better understand the instructions in this manual. To. reduce. your. risk. of. serious. injury. or. damage. to. the. machine,. read...
Page 8 - NOTICE; SAFETY
-6- Model W1846 (For Machines Mfd. Since 6/17) SA FE T Y Indicates.a.potentially.hazardous.situation.which,.if.not.avoided,. MAY.result.in.minor.or.moderate.injury. Indicates.an.imminently.hazardous.situation.which,.if.not.avoided,. WILL.result.in.death.or.serious.injury. Indicates.a.potentially.haz...
Page 11 - ELECTRICAL
-9- Model W1846 (For Machines Mfd. Since 6/17) EL EC TR IC A L ELECTRICAL Circuit.Requirements This machine must be connected to the correct size and type of power supply circuit, or fire or electrical damage may occur. Read through this section to determine if an adequate power supply circuit is av...
Page 12 - Grounding.Requirements
-10- Model W1846 (For Machines Mfd. Since 6/17) EL EC TR IC A L Grounding.Requirements This machine MUST be grounded. In the event of certain types of malfunctions or breakdowns, grounding provides a path of least resistance for electric current to travel—in order to reduce the risk of electric shoc...
Page 13 - TU; SETUP; Unpacking; Inventory
-11- Model W1846 (For Machines Mfd. Since 6/17) SE TU P SETUP Description. Qty • Safety Glasses ..............................................1 • Cleaner/Degreaser ............................ As Needed • Disposable Shop Rags ......................... As Needed • Straightedge 4' .......................
Page 16 - Assembly
-14- Model W1846 (For Machines Mfd. Since 6/17) SE TU P Bench.Mounting Number.of.Mounting.Holes................................... 4 Diameter.of.Mounting.Hardware.Needed............... 1 ⁄ 2 " Machine Base Workbench Bolt Flat Washer Flat Washer Lock Washer Hex Nut Figure.4. Typical "Through ...
Page 19 - PE; OPERATIONS; General
-17- Model W1846 (For Machines Mfd. Since 6/17) O PE R ATIONS OPERATIONS General This machine will perform many types of operations that are beyond the scope of this manual. Many of these operations can be dangerous or deadly if performed incorrectly. The instructions in this section are written wit...
Page 20 - Sanding
-18- Model W1846 (For Machines Mfd. Since 6/17) O PE R ATIO NS Sleeve.Selection The Model W1846 comes with six different sizes of sanding drums and sleeves. Refer to the Part Diameter Table (see Figure 10 ) when determining the appropriate table insert, sanding drum, and drum washer size for a parti...
Page 21 - ACCESSORIES
-19- Model W1846 (For Machines Mfd. Since 6/17) O PE R ATIONS 1 ⁄ 2 " x 4 1 ⁄ 2 " Sleeves D4759 1 ⁄ 2 " x 4 1 ⁄ 2 " 60-Grit D4760 1 ⁄ 2 " x 4 1 ⁄ 2 " 80-Grit D4761 1 ⁄ 2 " x 4 1 ⁄ 2 " 100-Grit D4762 1 ⁄ 2 " x 4 1 ⁄ 2 " 120-Grit D4763 1 ⁄ 2 " x 4 1 ⁄ 2 "...
Page 22 - MAINTENANCE
-20- Model W1846 (For Machines Mfd. Since 6/17) M A INTE N A N CE MAINTENANCE For optimum performance from your machine, follow this maintenance schedule and refer to any specific instructions given in this section. Before.Each.Use • Inspect the sanding drums and sleeves for wear or damage. • Check ...
Page 23 - SERVICE
-21- Model W1846 (For Machines Mfd. Since 6/17) SE RV IC E Troubleshooting Motor.and.Electrical PROBLEM POSSIBLE.CAUSE CORRECTIVE.ACTION Motor will not start. 1. Switch disabling key removed.2. Low voltage.3. Open circuit in motor or loose connections. 1. Insert key to enable power.2. Check power li...
Page 25 - STOP
-23- Model W1846 (For Machines Mfd. Since 6/17) SE RV IC E PADDLE SWITCH (viewed from behind) MOTOR 120V Neutral Hot Ground Ground RUN CAPACITOR 20UF 250VAC Neutral Hot Ground 120 VAC 5-15 Plug STOP Read Page 22 Before Wiring Wiring.Diagram This. motor. wiring. diagram. is. current. at. the. time. o...
Page 26 - RT; PARTS; Main
-24- Model W1846 (For Machines Mfd. Since 6/17) PA RT S 1 2 (2-1, 2-2, 2-3, 2-4, 2-5) 3 (3-1, 3-2, 3-3, 3-4, 3-5, 3-6) 4 (4-1, 4-2, 4-3, 4-4, 4-5) 5 (5-1, 5-2, 5-3, 5-4, 5-5, 5-6) 6 7 8 9 10 11 11 12 12 13 14 15 16 17 18 19 20 21 22 23 2425 26 27 27 28 29 30 31 32 33 34 35 36 37 38 38 37 34 39 40 41...
Page 31 - WARRANTY
WARRANTY Woodstock International, Inc. warrants all Shop Fox machinery to be free of defects from workmanship and materials for a period of two years from the date of original purchase by the original owner. This warranty does not apply to defects due directly or indirectly to misuse, abuse, neglige...