Sherwood SR 7206 - Manuals

Sherwood SR 7206 – Manual in PDF format online.

Manuals:

Manual Sherwood SR 7206

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12

Summary

Page 3 - replacement of parts.; result in serious injury or death.

www.sherwoodscuba.com INTRODUCTION The instructions set forth in this document are intended to guide the experienced scuba equipment repair technician through the standard service procedure for the Dual Octo second stage regulator. It is assumed that the technician possesses basic scuba equipment re...

Page 5 - ) Checking alignment of Demand Lever; sealing and require replacement of the part.

www.sherwoodscuba.com 8. Before further disassembly check the alignment of the Demand Lever (7) with regard to the Housing (10). The surface of the Demand Lever that contacts the Diaphragm should be parallel to the Housing within 1/16 inches. Place a straight edge across the Housing to check the ali...

Page 7 - Reassembly; Install a new Seat into the Poppet.

www.sherwoodscuba.com Reassembly 15. Install the Exhaust Valves using the same gentle stretching technique used for removal. 16. Install each Exhaust Valve Cover using only your fingers to tighten. Use of tools may damage the Exhaust Valve Cover. 17. If the demand valve subassembly was cleaned as a ...

Sherwood Manuals