Page 2 - Introduction; READ THIS BEFORE OPERATING YOUR UNIT; : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,; FOR YOUR SAFETY; Note to CATV System Installer :; CAUTION
2 Introduction READ THIS BEFORE OPERATING YOUR UNIT : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTREMOVE COVER (OR BACK). NOUSER-SERVICEABLE PARTSINSIDE. REFER SERVICING TOQUALIFIED SERVICE PERSONNEL. : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. C...
Page 3 - SAFETY INSTRUCTION; ENGLISH
3 1. Read Instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions s...
Page 4 - CONTENTS
4 • Introduction READ THIS BEFORE OPERATING YOUR UNIT | 2 SAFETY INSTRUCTION | 3 • System Connections | 6 • Controls & Displays FRONT PANEL CONTROLS(VR-670) | 9 UNIVERSAL REMOTE CONTROLS | 10 ENTERING A SETUP CODE | 11 OPERATING COMPONENTS WITH REMOTE CONTROL | 12 REMOTE CONTROL OPERATION RANGE ...
Page 6 - System Connections; CONNECTING ANTENNAs
System Connections 6 ENGLISH • Do not plug the AC input cord into the wall AC outlet until all connections are completed.• Be sure to observe the color coding when connecting audio and video cords.• Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the uni...
Page 7 - CONNECTING DIGITAL OUT
7 ENGLISH 2. CONNECTING AUDIO/VIDEO COMPONENTs • The AUX IN jacks may be connected to an additional audio component such as a CD player, a tape deck, etc.• The AUDIO OUT jacks may be connected to an additional amplifier or receiver.• The COMPONENT VIDEO OUTs of this unit are capable of outputting ei...
Page 8 - CONNECTING SPEAKERS; SPEAKER PLACEMENT; continued; Audio output from the unit’s OPTICAL DIGITAL OUT
4. CONNECTING SPEAKERS • Be sure to connect speakers firmly and correctly according to the channel(left and right) and the polarity(+and-). If the connections are faulty, no sound will be heard fromthe speakers, and if the polarity of the speaker connection isincorrect, the sound will be unnatural a...
Page 9 - FLUORESCENT DISPLAY
9 ENGLISH Controls & DIsplays 1. POWER button 2. FUNCTION SELECT button 3. VOLUME UP/DOWN (+/-) buttons 4. TONE/BALANCE SELECT button 5. PRESET TUNING UP/DOWN, FORWARD/BACKWARD SKIP( / ) buttons 6. PLAY/PAUSE( / ) button FLUORESCENT DISPLAY 7. STOP( ) button 8. OPEN/CLOSE( ) button 9. PHONES jac...
Page 10 - UNIVERSAL REMOTE CONTROLS
ENGLISH 10 UNIVERSAL REMOTE CONTROLS This universal remote control can operate not only this unit but also most popular brands of video componentssuch as TVs, VCRs, cable boxes, satellite receivers, etc.• To operate 4 components other than this unit, you should enter the setup code for each componen...
Page 11 - FUNCTION TABLE of the NUMBERED BUTTONS; ENTERING A SETUP CODE
ENGLISH 11 FUNCTION TABLE of the NUMBERED BUTTONS • This remote control can control up to 4 different components.• Before operating video components other than this unit with using this remote control, the setup code for each component should be entered. ENTERING A SETUP CODE Find the setup code acc...
Page 12 - REMOTE CONTROL OPERATION RANGE
• Use the remote control unit within a range of about 5 meters (16 feet) and angles of up to 30 degreesaiming at the remote sensor. ENGLISH 12 REMOTE CONTROL OPERATION RANGE OPERATING COMPONENTS WITH REMOTE CONTROL 1 Enter the setup code for each component other than this unit you wish to control. F...
Page 13 - LOADING BATTERIES
13 ACTIVE SUBWOOFER CONTROLS(ASW-670) POWER OFF ON VOLUME MIN MAX ENGLISH LOADING BATTERIES 1 2 • Remove the batteries when they are not used for a long time. • Do not use the rechargeable batteries(Ni-Cd type).• Be sure to use alkaline batteries. Remove the cover. Load two batteries (“AAA” size, 1....
Page 14 - OPERATION OF ACTIVE SUBWOOFER
ENGLISH OPERATION OF ACTIVE SUBWOOFER • The SIGNAL IN indicator lights up in amber. This means that the subwoofer is not disconnected fromthe AC mains and a small amount of current is retained tosupport the operation readiness. • To switch the power off, push the POWER switch again. Then power is cu...
Page 15 - LISTENING TO A PROGRAM SOURCE; Basic Operation
ENGLISH LISTENING TO A PROGRAM SOURCE Basic Operation 15 • Each time the POWER button is pressed, the unit is turned on to enter the operating mode(the STANDBY indicator lights up inblue)or off to enter the standby mode(the STANDBY indicator lightsup in amber). • In the standby mode, if the PLAY/PAU...
Page 17 - Operation of DVD player; PRELIMINARY KNOWLEDGE ABOUT DISCS
Region code • DVD players and DVD Videos have their own Region Code numbers which are assigned to each country or area asshown below. DVD players are set to your Region Codenumber at the factory. As a result, if the region codenumber of this DVD player is different from that of the DVDVideo, playbac...
Page 19 - DEFINITION OF TERMS
ENGLISH 19 DEFINITION OF TERMS Component video Video signals with three channels of separate informationthat makes up the picture. There are some types ofcomponent video, such as Y/CB(Pb)/CR(Pr) and R/G/B. Bitstream The digital signal form of multichannel audio data (e.g., 5.1channel) before it is d...
Page 20 - To stop playback and return to the menu display; To start playback from the menu of DVD Video; BASIC PLAYBACK; Before starting playback
To stop playback and return to the menu display • Press the TOP MENU or MENU button on the remote control.(Which button is pressed differs depending on the discs.)• Playback is suspended and the menu display appears. To start playback from the menu of DVD Video • Press the CURSOR / / / buttons to se...
Page 21 - To start playback from the menu of MP3 disc
21 To start playback from the menu of MP3 disc In the stop mode, select the desired list mode. 1 • Each time this button is pressed, the list mode changes as follows: Folder list mode : It displays the folder/file structure as they were recorded. File list mode : It displays all the files on a disc,...
Page 23 - DISPLAYING DISC INFORMATION DURING PLAYBACK
23 ENGLISH Slow playback during playback[DVD Video only] Rapid playback during playback • Each time the button is pressed, the disc is advanced or reversed fast at 5 step speed. X 2 X 4 X 8 X 16 X 32 Off (normal playback) • To return to normal playback, press the PLAY/PAUSE ( ) button. • Each time t...
Page 24 - PLAYING THE DESIRED SECTION OF DISC; When selecting a search mode
24 ENGLISH In case of DVD Video PLAYING THE DESIRED SECTION OF DISC 1 During playback, press the SEARCH button. 2 While displaying the search menu, press the CURSOR / buttons to select the desired item, then press the CURSOR button to select its setting menu. 3 Select the section to be played with t...
Page 25 - When selecting a setting mode
25 ENGLISH When entering the track number Examples) For “3” : For “11” : When entering the elapsed time You can play a disc from the desired point by specifyingthe elapsed time from the beginning of the disc(for disctime search mode) or the current track/file (for track/filesearch mode).Examples) Fo...
Page 26 - When using a title menu; When using a DVD menu
• Then the DVD menu available on the disc is displayed on TV screen. • If the disc does not have the DVD menu, this function does not work. • The unit starts playback of the selected item.• When the menu continues onto another screen, repeat this step until the desired item is selected. • Then a lis...
Page 27 - REPEAT PLAYBACK; Repeating the desired part
27 ENGLISH • During playback of the desired title, chapter, folder, track or file, press the REPEAT button. • Then the selected repeat mode is displayed on the TV screen. • Each time this button is pressed, the repeat mode changes depending on the disc as follows : • To return to normal playback, pr...
Page 28 - PLAYING TRACKS IN DESIRED ORDER [CD only]
PLAYING TRACKS IN DESIRED ORDER [CD only] Press the PROGRAM button. 1 While displaying the program menu, select the desired track with pressing the NUMERIC buttons. 2 • Up to 20 tracks can be programmed to be played in any desired order. Example) When the track 5 and 11 are programmed. Repeat the ab...
Page 29 - Continued
29 ENGLISH Continued Rectifying any wrong programmed tracks. • During programming, press the CURSOR / / / buttons to select the wrong programmed tracks, then select the desired track with pressing the NUMERIC buttons. • The new track will be programmed in its place. Clearing the programmed tracks [T...
Page 30 - CHANGING THE AUDIO LANGUAGE [DVD Video only]
30 ENGLISH • It is possible to change the audio language to a different language from the one selected at the initial settings. (For details, refer to “When selecting the Audio, Subtitle or Disc Menu” on page 38.)This operation works only with DVD Videos on which multiple audio languages are recorde...
Page 31 - CHANGING THE CAMERA ANGLE [DVD Video only]
31 ENGLISH • Some DVD Videos contain scenes which have been shot simultaneously from multiple camera angles. For these discs, the same scene can be viewed from each of these different angles. • The recorded angles differ depending on the disc used. • During playback at the scene recorded from multip...
Page 32 - CHANGING THE VIDEO SIGNAL FORMAT
32 ENGLISH CHANGING THE VIDEO SIGNAL FORMAT • Depending on the countries, this DVD player conforms to either the NTSC color system for U.S.A, Canada, etc., or the PAL for Europe, Australia, China, etc. If the color system of this DVD player is different from that of your TV monitor and the discs to ...
Page 33 - Initial Settings
33 ENGLISH When selecting the General Setup When selecting the Audio Setup When selecting the Preference When selecting the Exit Setup The initial settings of the unit at the factory can be modified as desired later.Even after the power of the unit is switched to the standby mode, the initial settin...
Page 34 - SETTING THE GENERAL SETUP; When selecting the TV Type
34 ENGLISH SETTING THE GENERAL SETUP 1 Press the CURSOR / buttons to select the preferred item. • Then the setting menu of the selected item is displayed. • Depending on the countries, this DVD player conforms to either the NTSC color system for U.S.A, Canada, etc., or the PAL for Europe, Australia,...
Page 35 - When selecting the Captions; When selecting the OSD Language; When selecting the SPDIF Output
35 ENGLISH Continued When selecting the Captions • You can select the OSD(On-Screen Display) language to be displayed. • You can select the desired of ENGLISH, FRENCH, ITALIAN, GERMAN, SPANISH, PORTUGUESE andDUTCH. When selecting the OSD Language Notes : • This unit can output a preferred digital si...
Page 37 - SETTING THE AUDIO SETUP
37 ENGLISH SETTING THE AUDIO SETUP 1 Press the CURSOR / buttons to select the Dynamic Range Compression. 5 Set other setups to your preference. 4 Press the CURSOR button to select the item menu. 2 Press the CURSOR button to select the setting menu. • Each time the CURSOR or button is pressed, the se...
Page 38 - SETTING THE PREFERENCE
38 ENGLISH Note : • If the selected language is not recorded in the DVD Video, one of the recorded languages is automatically selected. When selecting the Audio, Subtitle or Disc Menu SETTING THE PREFERENCE 1 Press the CURSOR / buttons to select the preferred item. Example) When selecting the Audio ...
Page 39 - When selecting the Parental Control
39 ENGLISH When selecting “Others” • Then 4-digit language code input screen is displayed. • Refer to “DVD Language Code List” on page 55 to find the 4-digit language code for the preferred language and input it with pressing the NUMERIC buttons, then press the ENTER button. Example) When inputting ...
Page 41 - When selecting the Password
41 ENGLISH • When each password is input correctly, new password is memorized and the previous menu screen is displayed.• If you input a wrong password, you cannot change the password to the desired. In this case, input the password again. Note : • Do not forget the password. If you forgot your pass...
Page 42 - When selecting the Default
42 ENGLISH Continued 1 Press the CURSOR / buttons to select the Default. • Each time the CURSOR or button is pressed, the setting menu or the item menu is selected. • Then the settings are reset to initial settings and the setup mode is canceled. 2 Press the CURSOR button to select the setting menu,...
Page 43 - LISTENING TO RADIO BROADCASTS; Operation of Tuner; Auto tuning; Tune in the desired station with auto or manual tuning.; Presetting radio stations
43 ENGLISH LISTENING TO RADIO BROADCASTS 1 Select the desired band. 2 Press the TUNING UP( ) or DOWN( ) button for more than 0.5 second. • Then “AUTO” in indicator lights up on the display.• The tuner will now search until a station of sufficient strength has been found. The display shows the tunedf...
Page 45 - RECORDING WITH TAPE DECK; Operation of Other Functions; DIGITAL AUDIO RECORDING WITH MD RECORDER
45 ENGLISH RECORDING WITH TAPE DECK 1 Select the desired input as recording source except TAPE. 2 Start recording on the component connected to TAPE. Operation of Other Functions 3 Start play on the desired input. • The volume, tone(bass, treble) settings, etc. have no effect on the recording signal...
Page 46 - SETTING THE CLOCK; When checking the time while displaying operation status
46 ENGLISH SETTING THE CLOCK 1 Press the TIME ADJUST button. Example) When setting to 2:20 PM 2 Press the CURSOR / buttons to set the hour and press the CURSOR / buttons to set the minute. 3 Press the ENTER button to memorize. • Each time this button is pressed, the time or the current operation sta...
Page 47 - OPERATING THE SLEEP TIMER; Before setting the timer
47 ENGLISH OPERATING THE SLEEP TIMER 1 Press the SLEEP/TIMER button. 2 Press the CURSOR / button to select the desired sleep time. • Then “SLP OFF” is displayed for several seconds. • Each time the CURSOR or button is pressed, the sleep time changes and disappear in several seconds asfollows: OFF 10...
Page 49 - When selecting “DVD”
49 ENGLISH 8 According to the selected input source, make preparations for timer play. When selecting “DVD” 1. Load a CD or DVD Video 2. In case of DVD Video, set the Last Memory to ON.(Refer to “When selecting the Last Memory” onpage 36.) 3. Play back a DVD Video. Notes : • In case of most DVD vide...
Page 50 - When canceling the TIMER; ADJUSTING THE BRIGHTNESS OF THE DISPLAY
ENGLISH 50 Continued 1 Press the SLEEP/TIMER button for more than 2 seconds to enter the timer setting mode. • “TMR ON”(or “TMR OFF”) is displayed.• To cancel the timer setting mode, press this button for more than 2 seconds again. • Each time the ENTER button is pressed, the timer mode changes as f...
Page 51 - Troubleshooting Guide; REMOTE CONTROL UNIT
ENGLISH 51 Troubleshooting Guide If a fault occurs, run through the table below before taking your system for repair.If the fault persists, attempt to solve it by switching the unit off and on again. If this fails to resolve the situation, consultyour dealer. Under no circumstances should you attemp...
Page 52 - SPEAKER SYSTEM
52 ENGLISH PROBLEM POSSIBLE CAUSE REMEDY Stations cannot bereceived Preset stations cannot bereceived Poor FM reception • No antenna is connected.• The desired station frequency is not tuned in.• The antenna is in wrong position. • An incorrect station frequency has been memorized. • The memorized s...
Page 53 - Specifications
53 ENGLISH MAIN UNIT(VR-670) [AMPLIFIER SECTION] • Power output, stereo mode, 6 Ω , THD 0.5 %, 20 Hz~20 kHz | 2 25 W • Total harmonic distortion, 6 Ω , 25 W, 1 kHz | 0.09 % • Intermodulation distortion 60 Hz : 7 kHz=4:1 SMPTE, 6 Ω , 25 W | 0.05 % • Signal to noise ratio, IHF “A” weighted, Line (AUX,...
Page 55 - DVD Language Code List
ENGLISH 55 DVD Language Code List 6566 6565 6570 8381 6577 6582 7289 6583 6583 6590 6665 6985 6678 6890 6672 6682 6671 7789 6669 7577 6765 9072 7282 6779 6783 6865 7876 6978 6979 6984 7079 7074 7073 7082 7089 Code Language Abchazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Aze...
Page 56 - Setup Code Table; T V
ENGLISH 56 Setup Code Table AOC 005 003 Admiral 041 031 Aiko 014 Akai 005 Alaron 026 Ambassador 024 America Action 027 Ampro 043 Anam 027 047 048 049 Audiovox 030 027 014 034 Baysonic 027 Belcor 003 Bell & Howell 019 001 Bradford 027 Brockwood 003 Broksonic 028 031 CXC 027 Candle 005 011 Carniva...
Page 57 - V C R
ENGLISH 57 Admiral 027 021 Adventura 000 Aiko 025 Aiwa 005 000 Akai 026 America Action 025 America High 004 Asha 023 Audiovox 005 Beaumark 023 Bell & Howell 017 Brocksonic 021 Broksonic 020 018 021 001 CCE 015 025 Calix 005 Canon 004 Carver 081 Cineral 025 Citizen 005 025 Colt 015 Craig 005 012 ...
Page 59 - C B L
ENGLISH 59 Quasar 004 (TV use 008) 028 (TV use 042) RCA 013 (TV use 012) 004 (TV use 008) 027 (TV use 041) Sansui 000 Sanyo 023 Sear 000 005 Sharp 027 (TV use 041) Sony 002 (TV use 000) Symphonic 000 Zenith 000 ABC 002 003 009 030 007 006 008 Allegro 018 021 Archer 018 026 Bell&Howell 009 Centur...
