Page 2 - ENGLISH; Introduction; READ THIS BEFORE OPERATING YOUR UNIT; : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,; CANADA; Note to CATV System Installer :; CAUTION
ENGLISH Introduction READ THIS BEFORE OPERATING YOUR UNIT : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTREMOVE COVER (OR BACK). NOUSER-SERVICEABLE PARTSINSIDE. REFER SERVICING TOQUALIFIED SERVICE PERSONNEL. : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOIST...
Page 3 - SAFETY INSTRUCTIONS
ENGLISH 1. Read Instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instruct...
Page 4 - CONTENTS
4 CONTENTS Introduction • READ THIS BEFORE OPERATING YOUR UNIT........................................................................................................ 2 System Connections ...................................................................................................................
Page 5 - System Connections; CONNECTING ANTENNAs; FM Outdoor Antenna; • Change the position of the FM indoor antenna until you; AM Loop Antenna; • Place the AM loop antenna as far as possible
5 System Connections • Do not plug the AC input cord into the wall AC outlet until all connections are completed.• Be sure to observe the color coding when connecting audio and video cords.• Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver.• ...
Page 6 - TAPE; other audio component; CD player; CH DIRECT OUTPUT; CONNECTING 7 CH DIRECT INPUTS
6 PLAY REC CD AUX TAPE TAPE Tape deck, MD recorder, etc. AUX other audio component AUDIO OUT R L LR LR CD player AUDIO OUT R L AUDIO OUT AUDIO IN SURROUND BACK CENTER FRONT SURROUND SUB WOOFER 7-CH DIRECT INPUT SURROUND SUBWOOFER FRONT CENTER 7 CH DIRECT OUTPUT Decoder with 6 or 7channel outputs R R...
Page 7 - • The jacks of VIDEO 1 may also be connected to; VIDEO 1; VIDEO 1; MONITOR
7 4. CONNECTING VIDEO COMPONENTS 5. CONNECTING VIDEO COMPONENTS equipped with S-VIDEO jacks • The jacks of VIDEO 1 may also be connected to a VCR, DVD recorder or other digital videorecording component. For details, refer to theoperating instructions of the component to beconnected. • The jacks of V...
Page 8 - COMPONENT VIDEO connections.
8 6. CONNECTING VIDEO COMPONENTS equipped with COMPONENT VIDEO jacks P R /C R P B /C B Y COMPONENT VIDEO 1 VIDEO 2 IN IN OUT MONITOR P R /C R P B /C B Y P R /C R P B /C B Y VIDEO 1 VCR, etc. VIDEO 2 DVD player, LD player, etc. MONITOR TV, projector, etc. COMPONENT VIDEO OUT Y P B P R COMPONENT VIDEO...
Page 9 - Front; CONNECTING SPEAKERS; CONNECTING DIGITAL INs and OUT
FRONT SPEAKERS (6 ) SURROUND SPEAKERS (6 ) CENTER SPEAKER (6 ) SURROUND BACK (6 ) Front right Surround right Front left Surround left (Front)Center Surround back 8. CONNECTING SPEAKERS • Be sure to connect speakers firmly and correctly according to the channel(left and right) and the polarity(+and -...
Page 10 - SWITCHED AC OUTLET; • Plug this cord into a wall AC outlet.; SUBWOOFER PRE OUT connection; • To emphasize the deep bass sounds, connect a; CONNECTING SYSTEM CONTROL; • Connect this jack to the DIGI LINK jack of the external
10 AC OUTLET To a wallAC outlet 12. AC INPUT CORD 11. SWITCHED AC OUTLET • Plug this cord into a wall AC outlet. • This outlet is switched on(power-on mode) and off(standby mode) according to power control asfollows(Maximum total capacity is 100 W). Standby mode - Switched AC outlet offPower-on mode...
Page 11 - FLUORESCENT DISPLAY; Front Panel Controls; display
FLUORESCENT DISPLAY 11 Front Panel Controls 1. POWER switch2. STANDBY button/indicator3. HEADPHONE jack4. SPEAKER button/indicator5. CHANNEL SELECTOR button6. ADJUST UP/DOWN( / ) buttons 7. TONE MODE button8. SPEAKER SETUP button9. DYNAMIC RANGE button 10. CINEMA EQ button11. MEMORY/ENTER button12. ...
Page 12 - VIDEO 3 VIDEO/AUDIO INPUT JACKS; VIDEO 3
12 VIDEO 3 VIDEO/AUDIO INPUT JACKS VIDEO 3 Additional videocomponent VIDEO OUT AUDIO OUT VIDEO L - AUDIO - R VIDEO 3 VIDEO L - AUDIO - R VIDEO 3 When not using theVIDEO 3 INPUT jacks,cover these jackswith the supplied cap. • The VIDEO 3 jacks may be also connected to an additional video component su...
Page 13 - Universal Remote Controls; Digi link system remote controls; “FUNCTION TABLE of the NUMBERED BUTTONS” on the following page 14.
13 Universal Remote Controls This universal remote control can operate not only this receiver but also most popular brands of audio and videocomponents such as CD players, cassette decks, TVs, cable boxes, VCRs, DVD players, satellite receivers, etc.• To operate 7 components other than this receiver...
Page 14 - FUNCTION TABLE of the NUMBERED BUTTONS
14 FUNCTION TABLE of the NUMBERED BUTTONS 9 PRESET 15 PRESET 14 P.SCAN .SCAN Device to be controlled Button symbol (for CD player) POWER ON STANDBY (POWER OFF) POWER ON STANDBY (POWER OFF) POWER ON STANDBY (POWER OFF) MUTE MUTE MENU SETUP DISPLAY RETURN RECORD STOP STOP REVERSE PLAY FORWARD PLAY PAU...
Page 15 - LOADING BATTERIES; • Use the remote control unit within a range of; OPERATING COMPONENTS WITH REMOTE CONTROL; • Remove the batteries when they are not used for a; several minutes after removing old batteries.
T/V T/V 1 2 3 4 8 7 6 5 9 M1 M1 M2 M2 M3 M3 0 +10 +10 MACRO MACRO 7m 30 30 REMOTESENSOR PTY SELECT DISPLAY EON TA SEARCH EON PTY SURROUND MODE INPUT SELECTOR VIDEO AUDIO STEREO 7CH DIRECT AUTO MASTER VOLUME ON/STANDBY POWER STANDBY ON/ OFF TUNING/PRESET ADJUST PHONES CHANNEL SELECTOR VIDEO L - AUDIO...
Page 16 - USING FUNCTIONS OF REMOTE CONTROL; Entering a setup code; code for each component should be entered.; DEVICE
16 USING FUNCTIONS OF REMOTE CONTROL Entering a setup code • This remote control can control up to 8 different components.• Before operating audio and video components other than this receiver with using this remote control, the setup code for each component should be entered. • For system remote co...
Page 17 - Using a punch-through function; Removing a punch-through function
• If removing all punch-through functions is performed successfully, the LED will flicker twice. 17 Using a punch-through function This remote control may be programmed to operateeither the AUDIO volume punch-through or the TVvolume and/or TV channel punch-through inconjunction with any of the eight...
Page 19 - LISTENING TO A PROGRAM SOURCE; Operations; Before operation; or; or
19 LISTENING TO A PROGRAM SOURCE Operations Before operation Select the desired input source. 3 • Enter the standby mode. • The STANDBY indicator lights up. When the power operation switchis in the OFF or STANDBY state,the apparatus is still connected onsome AC line voltages. Please be sure to unplu...
Page 20 - To listen with the headphones.; MUTE; VOLUME
To listen with the headphones. 9 • Ensure that the SPEAKER button is set to off.• When listening to a DTS or Dolby Digital program source, if the headphones are plugged and theSPEAKER button is set to off, it enters the 2-CHdownmix mode automatically. (For details, refer to“Downmixing into 2 front c...
Page 22 - SURROUND SOUND; atmosphere in your personal Home Theater.; DTS Digital Surround; “ ” includes the recording of up to 5.1 channels of; Dolby Digital EX; Surround modes
22 SURROUND SOUND • This receiver incorporates a sophisticated Digital Signal Processor that allows you to create optimum sound quality and sound atmosphere in your personal Home Theater. DTS Digital Surround DTS Digital Surround(also called simply DTS) is a multi-channel digital signal format which...
Page 24 - The subwoofer reproduces powerful deep bass sounds.; Speaker placement; Speaker distance settings
24 Ideal speaker placement varies depending on the size of your roomand the wall coverings, etc. The typical example of speaker placementand recommendations are as follows : Front left and right speakers and center speaker Place the front speakers with their front surfaces as flush with TV ormonitor...
Page 25 - Refer to the above and adjust the speaker settings; When selecting each setting mode,; Setting the type of speakers; Crossover frequency; • Each time the SPEAKER SETUP button is pressed,
25 Refer to the above and adjust the speaker settings Note : When the SPEAKER button is set to off or the 7 CH DIRECT is selected as an input source, the speaker setting function cannot be available. When selecting each setting mode, When adjusting the selected settingmode to the desired setting, or...
Page 26 - Memorize the adjusted speaker settings.
26 80 100 120 (L: Large, S: Small) • When selecting the type of front speaker, “FRONT L 10(ft)” • When selecting the distance of front speaker, “FRONT L 10(ft)” • When selecting the type of center speaker, “CNTR L 10(ft)” • When selecting the distance of center speaker, “CNTR L 10(ft)” • When select...
Page 27 - ENJOYING SURROUND SOUND; IN-DTS : The DTS signal processing is performed only; Signal format being input; AUTO
27 ENJOYING SURROUND SOUND Depending on the input digital signal format, select the desired decoding mode. 1 • Each time the AUTO button is pressed, the decoding mode changes as follows : IN-AUTO : The input digital signal format(DTS, Dolby Digital or PCM(2 channel stereo), etc.) usedby the selected...
Page 28 - Adjusting the Dolby Pro Logic II Music parameters; STEREO
• If the parameter display disappears, start from the step 1 again. At the desired parameter, adjust it as desired. 2 Repeat the above steps 1 and 2 to adjustother parameters. 3 28 To cancel the surround mode for stereo operation • Then the stereo mode is selected.• To cancel the stereo mode, select...
Page 29 - Adjusting the current channel level; Adjusting each channel level with test tone
29 Adjusting the current channel level Press the CHANNEL SELECTOR button. 1 or CHANNEL SELECTOR Enter the test tone mode. 1 • The volume level of each channel can be adjusted easily with the test tone function. Note : When the 7 CH DIRECT is selected as an input source, the SPEAKER button is set to ...
Page 30 - Memorizing the adjusted channel levels
30 Memorizing the adjusted channel levels Adjust the level of the selected channelas desired. 2 Repeat the above steps 1 and 2 to adjust each channel level. 3 • The LFE level can be adjusted within the range of -10~0 dB and other channel levels within the rangeof -15~+15 dB. • In general, we recomme...
Page 31 - Calling the memorized levels; Downmixing into 2 front channels
31 Press the CHANNEL SELECTOR button. 1 Select the desired one between REF.1 and REF.2 2 Calling the memorized levels or CHANNEL SELECTOR T/V 1 2 3 4 8 7 6 5 9 M1 M2 M3 0 +10 MACRO T/V 1 2 3 4 8 7 6 5 9 M1 M2 M3 0 +10 MACRO CH.SEL • “REF.1” (or “USER”, etc.) is displayed for several seconds. • If th...
Page 32 - LISTENING TO RADIO BROADCASTS; Presetting radio stations; TUNER
32 LISTENING TO RADIO BROADCASTS Presetting radio stations Auto tuning • Each time this button is pressed, the mode changes as follows; Tuning mode : “PRESET” goes off.Preset mode : “PRESET” lights up. • The tuner will now search until a station of sufficient strength has been found. The display sho...
Page 33 - Listening to FM stereo broadcasts; MEMORY BACKUP FUNCTION; Scanning preset stations in sequence
33 Repeat the above steps 1 to 3 to memorizeother stations. 4 After selecting the tuner as an inputsource, select the preset mode. 1 Listening to FM stereo broadcasts • The station has now been stored in the memory.• A stored frequency is erased from the memory by storing another frequency in its pl...
Page 34 - RECORDING; Recording with TAPE
34 RECORDING Start recording on the TAPE. 2 Select the desired input as a recordingsource except for TAPE. 1 Recording with TAPE Select VIDEO 2 or VIDEO 3 as a recordingsource. 1 Dubbing from video components ontoVIDEO 1 Select VIDEO 2 as a video recording source. 1 Dubbing the audio and video signa...
Page 35 - DIGITAL AUDIO RECORDING WITH MD RECORDER; CD
T/V 1 2 3 4 8 7 6 5 9 M1 M2 M3 0 +10 MACRO T/V 1 2 3 4 8 7 6 5 9 M1 M2 M3 0 +10 +10 MACRO MACRO 35 • The audio signal from the CD and the video signal from the VIDEO 2 will be dubbed and you canenjoy them on the TV set and from the speakers. Note : Be sure to observe the order of the above steps 1 a...
Page 36 - OTHER FUNCTIONS; SLEEP
36 Operating the sleep timer • The sleep timer allows the system to continue to operate for a specified period of time beforeautomatically shutting off. • To set the receiver to automatically turn off after the specified period of time. • Each time this button is pressed, the sleep time changes as f...
Page 37 - Using the OSD; CURRENT STATUS DISPLAY; Notes; Turn the menu screen on.; OSD
37 Using the OSD CURRENT STATUS DISPLAY MENU SCREEN When the AUTO OSD mode is set to ON on the menu screen, this mode shows the status corresponding to eachoperation.• The on-screen display will automatically disappear in several seconds.• For examples, there are 2 status displays as follows. When s...
Page 38 - CURSOR; When selecting the FUNCTION SELECT
38 Select the desired menu using theCURSOR UP( ) or DOWN( ) button. 2 When selecting the SPEAKER SETUP Confirm your selection. 3 T/V 1 2 3 4 8 7 6 5 9 M1 M2 M3 0 +10 MACRO T/V 1 2 3 4 8 7 6 5 9 M1 M2 M3 0 +10 MACRO CURSOR UP,DOWN T/V 1 2 3 4 8 7 6 5 9 M1 M2 M3 0 +10 MACRO T/V 1 2 3 4 8 7 6 5 9 M1 M2...
Page 39 - When selecting the AUTO OSD
39 Select the desired menu or(and) changethe condition with the correspondingbuttons. 4 Repeat the above steps 2~4 to change theconditions on other menus. 5 When selecting the AUTO OSD • Each time the ENTER button is pressed, the AUTO OSD mode is set to ON to turn on the current display or OFF to tu...
Page 40 - Troubleshooting Guide; PROBLEM
40 Troubleshooting Guide PROBLEM POSSIBLE CAUSE REMEDY No power No sound No sound from the surroundspeakers No sound from the centerspeaker No sound from the surroundback speaker Stations cannot be received Preset stations cannot bereceived Poor FM reception Continuous hissing noise duringFM recepti...
Page 41 - NTSC; Specifications
41 AMPLIFIER SECTION Power output, stereo mode, 6 Ω , THD 0.2 %, 40 Hz~20 kHz 2 100 W Total harmonic distortion, 6 Ω , 95 W, 1 kHz 0.09% Intermodulation distortion60 Hz : 7 kHz= 4 : 1 SMPTE, 6 Ω , 95 W 0.1% Input sensitivity, 47 k Ω Line (CD, TAPE, VIDEO) 200 mV Signal to noise ratio, IHF “A” weight...
Page 42 - Setup Code Table; TV
Setup Code Table AOC 005 003 Admiral 041 031 Aiko 014 Akai 005 Alaron 026 Ambassador 024 America Action 027 Ampro 043 Anam 027 047 048 049 Audiovox 030 027 014 034 Baysonic 027 Belcor 003 Bell & Howell 019 001 Bradford 027 Brockwood 003 Broksonic 028 031 CXC 027 Candle 005 011 Carnivale 005 Carv...
Page 43 - VCR
Admiral 027 021 Adventura 000 Aiko 025 Aiwa 005 000 Akai 026 America Action 025 America High 004 Asha 023 Audiovox 005 Beaumark 023 Bell & Howell 017 Brocksonic 021 Broksonic 020 018 021 001 CCE 015 025 Calix 005 Canon 004 Carver 081 Cineral 025 Citizen 005 025 Colt 015 Craig 005 012 023 015 024...
Page 46 - SAT
Stargate 010 014 026 Starquest 010 TV86 015 Teleview 014 Tocom 007 008 Toshiba 000 Tusa 010 Unika 018 United Artists 007 Universal 153 019 Viewstar 015 Zenith 000 024 Zentek 022 AlphaStar 008 Chaparral 001 Echostar 009 Expreevu 009 General Instrument 016 015 018 HTS 009 Hitachi 011 Hughes Net.Sys 00...
