Page 3 - ENGLISH; Introduction; CAUTION; READ THIS BEFORE OPERATING YOUR UNIT
2 ENGLISH Introduction : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This symbol is intended to alert the user to the presence ofuninsulated "dangerous voltage" within the product's enclo-sure that may be of sufficient magnitude to constitu...
Page 5 - System Connections; CONNECTING ANTENNAS
4 System Connections • Do not plug the AC input cord into the wall AC outlet until all connections are completed.• Be sure to observe the color coding when connecting audio, video and speaker cords.• Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the re...
Page 6 - Note
5 2 . CONNECTING PHONO • The TV and AUX jacks may also be connected to an additional component such as a TV, DVD player, etc.• The TAPE IN/OUT jacks can be connected to audio recording equipment such as a tape deck, an MD recorder, etc.• The VIDEO jacks may also be connected to an additional compone...
Page 8 - • Plug the supplied AC input cord into this AC input
7 7 . SWITCHED AC OUTLET 8 . AC INPUT • This outlet is switched on (power-on mode) and off (standby mode) according to power control as follows(Maximum total capacity is 100 W (0.43A)). Standby mode - Switched AC outlet off Power-on mode - Switched AC outlet on • Plug the supplied AC input cord into...
Page 9 - Front Panel & Remote Controls; SYSTEM REMOTE CONTROLS
8 Front Panel & Remote Controls • You can remotely control not only this receiver but also Sherwood compatible CD player. • For system remote control operation, first make the DIGI LINK connections. • In the DIGI LINK remote control system, if pressing PLAY, etc. on CD player, CD is selected aut...
Page 11 - • Use the remote control unit within a range of; matching the polarity.
10 LOADING BATTERIES REMOTE CONTROL OPERATION RANGE • Use the remote control unit within a range of about 7 meters (23 feet) and angles of up to 30degrees aiming at the remote sensor. • Remove the batteries when they are not used for a long time. • Do not use the rechargeable batteries (Ni-Cd type)....
Page 12 - Operations; In the operating mode, when the STANDBY button; Before operation; • This unit enters the standby mode and the; LISTENING TO A PROGRAM SOURCE; Switch the desired speakers on.
11 Operations � When the POWER ON button on the remote con-trol or the BAND button on the front panel ispressed, this unit is turned on to enter the operat-ing mode (the STANDBY indicator lights up inblue). � In the standby mode, if an INPUT SELECTOR but-ton on the remote control is pressed, the uni...
Page 13 - Operate the selected component for playback.
12 or UP DOWN � “MUTE” lights up. � To resume the previous sound level, press this but-ton again. � When adjusting the volume, the mutting effect isturned off. � The volume can be adjusted between the range of -80 ~ +20 dB. � Be sure to switch off both A and B speakers. 4 . Operate the selected comp...
Page 14 - Listening in the desired tone mode; Select the desired tone mode.; Adjusting the modes as desired
� Each time this button is pressed, the mode is displayed for several seconds and changes as follows : � SPEAKER ( � TONE : ON � BASS � TREBLE) or BALANCE ( � TONE : OFF) � � Each time the SELECT konb is rotated, you can adjust the selected mode as follows. � Note : � The mode display disappears, pe...
Page 15 - Continued
14 � You can switch on or off the desired speakers. � When adjusting the SPEAKER mode. � A ↔ B ↔ A + B ↔ OFF ← � When adjusting the TONE mode. OFF : To listen to a program source without the tone effect. � ON : To listen with the tone effect you adjusted. � When adjusting the tone (TREBLE and BASS) ...
Page 16 - Auto tuning; LISTENING TO RADIO BROADCASTS; Select the disired band.; Manual tuning
15 Auto tuning • Each time this button is pressed, the band is changed as follows : � FM STEREO � FM MONO � AM (" " lights up) (" " lights up) • When FM stereo broadcasts are poor because of weak broadcast signals, select the FM mono modeto reduce the noise, then FM broadcasts are re...
Page 17 - MEMORY BACKUP FUNCTION; Scanning preset stations in sequence; • The receiver will start scanning the stations in the; Tuning in preset stations; Repeat the above steps 1 to 3 to memorize other stations.; • After selecting the tuner as an input source,; Presetting radio stations; • You can store up to 30 preferred stations in the memory.; Tune in the desired station with auto or manual tuning.
� MEMORY BACKUP FUNCTION The following items, set before the receiver is turned off, are memorized.• INPUT SELECTOR settings• Preset stations,etc.• Tone (treble and bass) and balance settings. Scanning preset stations in sequence • The receiver will start scanning the stations in the preset sequence...
Page 18 - RDS Search; In the FM mode, select the RDS search mode.
17 • Use this function to automatically search and receive the stations offering RDS services. RDS (Radio Data System) is a method for sending information signals together with the transmitter signals. Your tuner iscapable of translating these signals and putting the information on the display. Thes...
Page 19 - In the FM mode, press the SEARCH MODE button twice.; PTY Search
18 1 . In the FM mode, press the SEARCH MODE button twice. PTY Search • Use this function to automatically search and receive the stations broadcasting the desired program type. • “PTY Search” is displayed. • Each time these buttons are pressed, one of 29 different types of programs is selected. (Ne...
Page 20 - TP Search; In the FM mode, press the SEARCH MODE button three times.; DISPLAY
19 • Use this function to automatically search and receive the stations broadcasting the traffic program. • “TP Search” is displayed. • The tuner automatically searches for stations broadcasting the traffic program. • “NO Programme”is displayed if the signal is too weak or there are no stations broa...
Page 21 - RECORDING; Recording with TAPE
20 � The audio signals from the desired input will be recorded onto the VIDEO. � The volume, tone(bass, treble) and balance settings have no effect on the recording signals. � When you select tuner, CD, AUX, TV or PHONO as a recording source, recording may be made on TAPE orVIDEO, or both simultaneo...
Page 22 - OTHER FUNCTIONS; Operating the sleep timer; Adjusting the brightness of the fluorescent displays
21 � Each time this button is pressed, the brightness ofall fluorescent displays of this unit and SherwoodCD player such as CD-772, etc. connected by theDIGI LINK changes together as follows: → ON → dimmer → OFF � In the display OFF mode, pressing any button willcancel the display OFF mode for sever...
Page 23 - Troubleshooting Guide; PROBLEM
22 Troubleshooting Guide PROBLEM POSSIBLE CAUSE REMEDY If a fault occurs, run through the table below before taking your receiver for repair.If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation,consult with your dealer. Under n...
Page 24 - Specifications
23 � AMPLIFIER SECTION � Power output, stereo mode, 8 Ω , THD 0.08 %, 20 Hz~20 kHz .............................................................. 2X100 W � Total harmonic distortion, R/O TO -3 dB, 20 Hz~20 kHz .......................................................................... 0.02 % � Input ...
